Fractal dimension and Shannon's entropy analyses of the architectural complexity caused by the inflammatory reactions induced by highly crystalline polyvinyl alcohol) microspheres implanted in subcutaneous tissues of the Wistar rats

The results of the histopathological analyses after the implantation of highly crystalline PVA microspheres in subcutaneous tissues of Wistar rats are here in reported. Three different groups of PVA microparticles were systematically studied: highly crystalline, amorphous, and commercial ones. In addition to these experiments, complementary analyses of architectural complexity were performed using fractal dimension (FD), and Shannon's entropy (SE) concepts. The highly crystalline microspheres induced inflammatory reactions similar to the ones observed for the commercial ones, while the inflammatory reactions caused by the amorphous ones were less intense. Statistical analyses of the subcutaneous tissues of Wistar rats implanted with the highly crystalline microspheres resulted in FD and SE values significantly higher than the statistical parameters observed for the amorphous ones. The FD and SE parameters obtained for the subcutaneous tissues of Wistar rats implanted with crystalline and commercial microparticles were statistically similar. Briefly, the results indicated that the new highly crystalline microspheres had biocompatible behavior comparable to the commercial ones. In addition, statistical tools such as FD and SE analyses when combined with histopathological analyses can be useful tools to investigate the architectural complexity tissues caused by complex inflammatory reactions. © 2012 WILEY PERIODICALS, INC.

Militarism, conflicts and indiscipline in police practices in the State of São Paulo during the First Brazilian Republic

This article examines the challenges involved in the process of police militarization and implementation of police discipline in the State of São Paulo during the First Brazilian Republic (1889 to 1930). The implementation of a militarized police model, initiated by the 1906 French Military Mission, was not fully able to deal with indiscipline issues among policemen. Beyond creating problems of its own, such as fostering a corporatist culture and strengthening rigid hierarchies, military discipline prevented police forces to address new issues that would affect its practices. Documents in the São Paulo State Public Archive provides a window to the daily violence, the personal compromises, the institutional conflicts and the political meddling that was part of police life in the State of São Paulo at the turn of the century.

A abordagem de questões sociocientíficas na formação continuada de professores de ciências: contribuições e dificuldades

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of mango loss (Mangifera indica L.) in the retail market of Botucatu-SP

Losses in the mango commercialization process in Brazil has reduced its offer to the consumer. The present study aims at determining these losses in different purchase sites of the retail market, its causes and suggestions for reducing them. Twenty two retail points, including supermarkets, greengroceries and free fair were selected in Botucatu, state of São Paulo, Brazil. The total amount commercialized was 114 ton/year. The following average losses were verified for each mango variety: 'Tommy Atkins'(11, 5%), Haden (12, 4%) and 12, 7% for other varieties. The total loss in retail market reached US$ 25.231,00 corresponding to 14 tons. The average loss percentage observed is compatible with previous studies running in other cities. The results suggest the need of better management, the exposure of the fruit to the consumer, technology in the transportation of the fruits and most appropriate storage for maintaining the quality and the reduction of losses. The results show the need of higher investment in technical personnel reskilling in fruit and vegetable sector.

Analysis of the Electrical Characteristics of an Alternative Solution for the Brazilian-Amazon Transmission System

This article analyzes the electrical parameters of a 3-phase transmission line using a 280-m-high steel tower that has been proposed for the Amazon transmission system in Brazil. The height of the line conductors and the distance between them are intrinsically related to the longitudinal and transverse parameters of the line. Hence, an accurate study is carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 3-phase 440-kV line, considering a wide range of frequencies and variable soil resistivity. First, a brief review of the fundamental theory of line parameters is presented. In addition, by using a digital line model, simulations are carried out in the time domain to analyze possible and critical over-voltage transients on the proposed line representation.

Contribution to the embryology of Leiothrix fluitans (Eriocaulaceae : Poales)

This paper presents a contribution to the understanding of the embryology, especially microsporogenesis, the antipodal cell behavior, and the early stages of the micropylar seed operculum, in Leiothrix fluitans, to elucidate these aspects both within the subgenus Rheocaulon and within the genus in Eriocaulaceae. Contrarily to previous descriptions of this same species, our results show the following: microsporogenesis is of the successive type and results in isobilateral microspore tetrads; the antipodal cells gradually fuse together to form a conspicuous cyst; and the inner integument, which does not develop into an endothelium, shows evidence of the initiation of the seed operculum in its micropylar end. Such features are common to the family as a whole. Evidenced for the first time in the family, the chalazal end of the ovule differentiates into a hypostase closely associated to the antipodal cyst. These overall features of L. fluitalls point out previous misinterpretations on some of its embryological aspects, especially those concerning the only report of simultaneous microsporogenesis and proliferation of the antipodal cells. Furthermore, the results presented here allow us to reinforce the uniformity of the embryological aspects within the Eriocaulaceae, strengthening the cystic arrangement of the antipodal cells as a potential autapomorphy of the family within the other Poales (commelinids). (C) 2007 Elsevier B.V. All rights reserved.

Evaluation of the photoelectrocatalytic method for oxidizing chloride and simultaneous removal of microcystin toxins in surface waters

The production of chlorine was investigated in the photoelectrocatalytic oxidation of a chloride-containing solution using a TiO(2) thin-film electrode biased at current density from 5 to 50 mA cm(-2) and illuminated by UV light. Such parameters as chloride concentrations from 0.001 to 0.10 mol L(-1), pH 2-12, and interfering salts were varied in this study in order to determine their effect on this oxidation process. At an optimum condition this photoelectrocatalytic method can produce active chlorine at levels compatible to water disinfections processes using a chloride concentration higher than 0.010 mol L(-1) at a pH of 4 and a current density of 30 mA cm(-2). The method was successfully applied to treat surface water collected from a Brazilian river. After 150 min of photoelectrocatalytic oxidation, we obtained a 90% reduction in total organic carbon removal, a 100% removal of turbidity, a 93% decrease in colour and a chemical oxygen demand (COD) removal of around 96% (N=3). The proposed technology based on photoelectrocatalytic oxidation was also tested in treating 250 mL of a solution containing 0.05 mol L(-1) NaCl and 50 mu g L(-1) of Microcystin aeruginosa. The bacteria is completely removed after 5 min of photoelectrocatalysis following an initial rate constant removal of -0.260 min(-1), suggesting that the present method could be considered as a promising alternative to chlorine-based disinfections. (C) 2008 Elsevier Ltd. All rights reserved.

Development of a micro-heat exchanger with stacked plates using LTCC technology

A green ceramic tape micro-heat exchanger was developed using Low Temperature Co-fired Ceramics technology (LTCC). The device was designed by using Computational Aided Design software and simulations were made using a Computational Fluid Dynamics package (COMSOL Multiphysics) to evaluate the homogeneity of fluid distribution in the microchannels. Four geometries were proposed and simulated in two and three dimensions to show that geometric details directly affect the distribution of velocity in the micro-heat exchanger channels. The simulation results were quite useful for the design of the microfluidic device. The micro-heat exchanger was then constructed using the LTCC technology and is composed of five thermal exchange plates in cross-flow arrangement and two connecting plates, with all plates stacked to form a device with external dimensions of 26 x 26 x 6 mm(3).

Evaluation of neighborhood impacts caused by companies of the high-tech industrial cluster of São Carlos, SP, Brazil

The purpose of this study was to develop a methodology for evaluating neighborhood impacts using a Geographic Information System (GIS) and to apply the procedures to the companies of the High-Technology Industrial Cluster of São Carlos. To this end, an evaluation was made of the neighborhood impacts on the physical environment, urban components, quality of life, and urban infrastructure using impact matrices, and the impacts were assigned scores according to type, order, magnitude and duration. Fifty one companies were examined based on data provided by the companies themselves and on field surveys. The impacts are represented spatially in proportional symbols maps, based on the spatial distribution of the companies in the urban area of the city of São Carlos and the areas of influence of each company. The application of the proposed methodology served to validate it and indicated that the neighborhood impacts caused by the companies of this study are related to each company's type of activity, its size, and its occupation of the area. © 2008 Journal of Urban and Environmental Engineering (JUEE). All rights reserved.

A First approach on the new transmission system in northern Brazil

This article shows an analysis of the electrical parameters of a three-phase transmission line section using a relatively new design for steel towers characterized by 280 meters high. These main features, the height of the line conductors and distance between them, are intrinsically related to the longitudinal and transversal parameters of the line. By this means, an analysis was carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 440-kV line through a wide range of frequencies and a variable soil resistivity. © 2012 The Institution of Engineering and Technology.

A comparative study of the physical properties of conventional and Grander-modified adhesive systems

Purpose: The objective of this study was to evaluate the influence of the Grander technology in reducing the surface tension and contact angle of a self-etch adhesive system. Methods: Distilled water and Xeno III self-etch adhesive system (Dentsply) were modified by physical contact with the Flexible unit Grander system to revitalize water, for 48 hours, resulting in four groups: Group 1 - Xeno III under normal conditions; Group 2 - Xeno III modified by Grander; Group 3 - distilled water under normal conditions; Group 4 - distilled water system modified by the Grander system;. Surface tension and contact angle (dentin substrate and titanium plate) of the adhesive system and water in normal and Grander-modified conditions was measured with a goniometer. Data were analyzed by ANOVA and Tukey test (5%). Results: Grander technology reduced the surface tension of water but not of the adhesive system Xeno III. The contact angle property of the adhesive ystem was not affected. Conclusion: Grander technology did not interfere with the surface tension and contact angle physical properties of the Xeno III self-etch adhesive system. Copyright: © 2011 Gonçalves et al.;.

Introduction of a non-conventional solution for Amazon transmission system: Analysis of the electric aspects

This article shows an analysis of the longitudinal electric parameters of a three-phase transmission line/section using a 280-meter high steel tower. This characteristic, the height of the line conductors and distance between them, are intrinsic related to the longitudinal and transversal parameters of the line. By this means, an accurate study was carried out in order to show the electric variations between a transmission line using the new technology and a three-phase conventional 440 kV line for a wide range of frequencies and a variable soil resistivity. In addition, by using a digital line model, simulations are carried out in time domain to analyze critical overvoltage transients on the studied line. © 2011 IEEE.

Ciência e tecnologia X empreendorismo: dialogos possíveis e necessários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Grander system: A new technology to reduce surface tension of adhesive systems in dentistry

Background. Reduced surface tension of liquids results in higher surface wetting ability and diffusivity by the substrate. Objectives. The objective of this study was to evaluate the influence of the Grander Technology in reducing the surface tension of adhesive systems. Methods. Two adhesive systems (self-etch and total-etch) were modified by physical contact with the Grander system Flexible unit to revitalize water, for 48 h. Surface tension of adhesive systems and water in normal and grander-modified conditions was measured with a goniometer. Results. The results showed a reduction of surface tension for all conditions grander-modified between 3-15%. Conclusions. Grander Technology was effective in reducing the surface tension of the Single Bond and Clearfil SE Bond adhesive systems. Clinical significance. Grander technology was employed to restructure the molecular structure of water-based adhesive systems, which can increase their wetness capacity and therefore ensure a greater diffusibility.

Militarismo, conflitos e indisciplina nas práticas policiais em São Paulo, Primeira República

This article examines the challenges involved in the process of police militarization and implementation of police discipline in the State of São Paulo during the First Brazilian Republic (1889 to 1930). Th e implementation of a militarized police model, initiated by the 1906 French Military Mission, was not fully able to deal with indiscipline issues among policemen. Beyond creating problems of its own, such as fostering a corporatist culture and strengthening rigid hierarchies, military discipline prevented police forces to address new issues that would aff ect its practices. Documents in the São Paulo State Public Archive provides a window to the daily violence, the personal compromises, the institutional confl icts and the political meddling that was part of police life in the State of São Paulo at the turn of the century.