Modelagem de ciclos combinados integrados à incineração de resíduos sólidos municipais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estabelecimento de rotinas de operação e orientações de manutenção para a planta termelétrica do DEN/FEG/UNESP

Steam generation plants have several industrial applications, being important for the national and global energetic matrix. Operational knowledge of steam plants is extremely important to forming a Mechanical Engineer. The facilities from Faculty of Engineering of Guaratingueta have a no operated steam pilot plant, named Thermal Machine Lab. Nowadays, the Energy Department from the faculty cannot explore this lab for its classes, even being essential to consolidate the theoretical concepts with tests simulating industrial applications. The goal of this project was to restore the operational condition of equipment of steam laboratory by fixing the equipment, and creating operational scripts for them. In a close future this lab could be used for classes, research and other applications

Ecological efficiency in thermoelectric power plants

This work evaluates the environmental impact resulting from the natural gas and diesel combustion in thermoelectric power plants that utilize the combined cycle technology (CC), as regarding to Brazilian conditions according to Thermopower Priority Plan JPP). In the regions where there are not natural gas the option has been the utilization of diesel and consequentily there are more emission of pollutants. The ecological efficiency concept, which evaluates by and large the environmental impact, caused by CO2, SO2, NOx and particulate matter (PM) emissions. The combustion gases of the thermoelectric power plants working with natural gas (less pollutant) and diesel (more pollutant) cause problems to the environment, for their components harm the human being life, animals and directly the plants. The resulting pollution from natural gas and diesel combustion is analyzed, considering separately the CO2, SO2, NO2 and particulate matter gas emission and comparing them with the in use international standards regarding the air quality. It can be concluded that it is possible to calculate thermoelectric power plant quantitative and qualitative environment factor, and on the ecological standpoint, for plant with total power of 41441 kW, being 27 170 kW for the gas turbine and 14271 kW for the steam turbine. The natural gas used as fuel is better than the diesel, presenting ecological efficiency of 0.944 versus 0.914 for the latter, considering a thermal efficiency of 54% for the combined cycle. (c) 2006 Elsevier Ltd. All rights reserved.

Combined cycle versus one thousand diesel power plants: pollutant emissions, ecological efficiency and economic analysis

The increase in the use of natural gas in Brazil has stimulated public and private sectors to analyse the possibility of using combined cycle systems for generation of electrical energy. Gas turbine combined cycle power plants are becoming increasingly common due to their high efficiency, short lead times, and ability to meet environmental standards. Power is produced in a generator linked directly to the gas turbine. The gas turbine exhaust gases are sent to a heat recovery steam generator to produce superheated steam that can be used in a steam turbine to produce additional power. In this paper a comparative study between a 1000 MW combined cycle power plant and 1000 kW diesel power plant is presented. In first step, the energetic situation in Brazil, the needs of the electric sector modification and the needs of demand management and integrated means planning are clarified. In another step the characteristics of large and small thermoelectric power plants that use natural gas and diesel fuel, respectively, are presented. The ecological efficiency levels of each type of power plant is considered in the discussion, presenting the emissions of particulate material, sulphur dioxide (SO2), carbon dioxide (CO2) and nitrogen oxides (NOx). (c) 2006 Elsevier Ltd. All rights reserved.

Economic and technical feasibility study of a combined-cycle cogeneration system associated with cellulose plants

In this paper, is presented an economical and technical feasibility study of a combined cycle cogeneration system proposed to be used in a pulp plant located in Brazil, where around 95% of country's pulp production is done by the use of Kraft Process. This process allows the use of black liquor and other by-products as fuel. This study is based upon actual data from a pulp plant with a daily production of 1000 tons., that generates part of the energy demanded by the process in a conventional cogeneration system with condensing steam turbine and two extractions. The addition of a gas turbine was studied to compare electricity production level and its related costs between original system and the new one, considering that the former can use industrial by-products and firewood as fuel, when required. Several parameters related to electric generation systems operation and production costs were studied. The use of natural gas in the combined cycle, in comparison with the use of firewood in the conventional system was studied. The advantages of natural gas fuel are highlighted. The surplus availability and the electricity generation costs are presented as a function of pulp and black liquor production.

Thermoeconomic functional analysis applied in cogeneration systems associated to cellulose plants

Thermoeconomic Functional Analysis is a method developed for the analysis and optimal design of improvement of thermal systems (Frangopoulos, 1984). The purpose of this work is to discuss the cogeneration system optimization using a condensing steam turbine with two extractions. This cogeneration system is a rational alternative in pulp and paper plants in regard to the Brazilian conditions. The objective of this optimization consists of minimizing the global cost of the system acquisition and operation, based on the parametrization of actual data from a cellulose plant with a daily production of 1000 tons. Among the several possible decision variables, the pressure and temperature of live steam were selected. These variables significantly affect the energy performance of the cogeneration system. The conditions which determine a lower cost for the system are presented in conclusion.

Economical analysis of ethanol steam reformer for hydrogen production associated with a sugarcane industry

An expressive amount of produced hydrogen is generated by customers in-situ such as petrochemical, fertilizer and sugarcane industries. However, the most utilized feedstock is natural gas, a non-renewable and fossil fuel. The introduction of biohydrogen production process associated in a sugarcane industry is an alternative to diminish emissions and contribute to create a CO2 cycle, where the plants capture this gas by photosynthesis process and produces sucrose for ethanol production. The cost of production of ethanol has dramatically decreased (from about US$ 700/m3 in 1970s to US$ 200/m3 today), becoming this a good option at near term, inclusively for its utilization by customers localized in main regions (localized especially in regions such as Southeastern Brazil) Also in near future, it will possible the utilization of fuel cells as form of distributed generation. Its utilization could occur specially in peak hours, diminishing the cost of investments in newer transmission systems. A technical and economic analysis of steam reformer of ethanol to hydrogen production associated with sugarcane industry was recently performed. This technique will also allow the use of ethanol when its price is relatively low. This study was based on a previous R&D study (sponsored by CEMIG - State of Minas Gerais Electricity Company) where thermodynamic and economic analyses were developed, based in the development of two ethanol steam reformers prototypes.x In this study an analysis was performed considering the use of bagasse as source of heat in the steam reforming process. Its use could to diminish the costs of hydrogen production, especially at large scale, obtaining cost-competitive production and permitting that sugarcane industry produces hydrogen in large scale beyond ethylic alcohol, anhydrous alcohol (or ethanol) and sugar.

Allelopathic plants. 7. Sunflower (Helianthus annuus L.)

Sunflower is an annual dicotyledonous plant, herbaceous, erect and native of North America. It is thermo- and photo-insensitive, hence, can be grown round the year in sub-tropical and tropical countries. Only two spp. H. annuus and H. tuberosum are cultivated for food, remaining spp. are ornamentals, weeds and wild plants. However, H. annuus is allelopathic and inhibit the growth and development of other plants thus reducing their productivity. Much information is available about the allelopathic effects of sunflower crop on following crops in crop rotations. Although it is harmful to all crops, but, is less harmful to crops of Graminae family than other families. It seems that the harmful effects of sunflower in crop rotations are due to release and accumulation of root exudates during crop growth in soil. Soil incorporation of its fresh (green manure) or dry biomass in soil is inhibitory to both crops and weed spp. Several allelochemicals have been characterized from the H. annuus, which inhibit the seed germination and seedling growth of A. albus, A. viridis, Agropyron repens (Elymus repens), Ambrosia artemsiifolia, Avena fatua, Celosia crustata, Chenopodium album, Chloris barbara, Cynodon dactylon, D. sanguinalis, Dactyloctenium ageyptium, Digitaria ciliaris, Echinochloa crus-galli, Flaveria australasica, Parthenium hysterophorus, Portulaca oleracea, Sida spinosa, Trianthema portulacastrum, Veronica perisca the inhibitory effects of this crop may be used for weed management with less herbicides for sustainable agriculture.

Sourgrass densities affecting the initial growth and macronutrient content of coffee plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Physiological dose response of coffee (Coffea arabica L.) plants to glyphosate depends on growth stage

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Glyphosate has low toxicity to citrus plants growing in the field

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Characterization of the genetic variability among Caesalpinia pulcherrima (L.) Sw. (Fabaceae) plants using RAPD molecular markers

O flamboyanzinho (Caesalpinia pulcherrima, Fabaceae) é muito utilizado como cerca-viva e na arborização de ruas, parques e jardins. de florescimento exuberante, suas flores podem apresentar coloração rosa, laranja ou amarela, conforme a variedade. Como características florais são essenciais para a definição do valor comercial de espécies ornamentais, o objetivo principal do trabalho foi verificar a existência de polimorfismo entre plantas de C. pulcherrima, que produzem flores de diferentes colorações, por marcadores moleculares RAPD. Foram escolhidas aleatoriamente 30 plantas adultas, cultivadas no município de Jaboticabal, Estado de São Paulo, para a retirada de amostras foliares para a extração de DNA. Dentre essas matrizes, 20 possuem flores alaranjadas, oito, flores amarelas, e apenas duas produzem flores de coloração rosa. Dos 140 primers de RAPD avaliados, 94 foram capazes de ampliar fragmentos definidos, gerando 246 bandas, das quais se observou 100% de bandas monomórficas, indicando que nenhum dos primers utilizados detectou polimorfismo entre os tratamentos. Concluiu-se que a técnica para detecção de polimorfismo por marcadores RAPD não foi eficiente, e que existe a necessidade de se testarem marcadores moleculares mais específicos. Além disso, a característica morfológica cor de flor é, possivelmente, controlada por vários genes ou pela combinação deles.

Effects of plant density and proportion on the interaction between wheat with alexandergrass plants

A determinação das relações competitivas entre espécies de plantas requer delineamentos experimentais e métodos de análise apropriados. A hipótese da pesquisa foi que duas espécies crescendo em convivência têm comportamento de crescimento e desenvolvimento distintos em função da sua competitividade relativa. O objetivo desta pesquisa foi quantificar a competitividade relativa da cultura do trigo com o capim-marmelada através da medida dos efeitos da densidade e da proporção de plantas, usando experimentos em série substitutiva. Monoculturas foram cultivadas em densidades de 1, 3, 5, 10 e 15 plantas por caixa e analisadas por regressão dos dados de massa seca, em 2006. Experimento em mistura foi cultivado nas proporções trigo:capim-marmelada de 0:6, 1:5, 2:4, 3:3, 4:2, 5:1 e 6:0 plantas por caixa e analisado através de interpretação gráfica de características de crescimento e produção, em 2007. Ambos os experimentos foram realizados em delineamento completamente casualizado com quatro repetições. Capim-marmelada foi mais sensível que trigo à competição intraespecífica. Capim-marmelada foi levemente mais competitivo que trigo. Número e massa de espigas e número de afilhos foram as características do trigo mais afetadas pela interferência do capim-marmelada.

Description and key to the fifth-instars of some Cicadas (Hemiptera: Cicadidae) associated with coffee plants in Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Oviposition of Quesada gigas (Hemiptera: Cicadidae) in coffee plants

Branches of coffee-plant were collected in Sao Sebastiao do Paraiso County, Minas Gerais State, at the Experimental Station of the Agricultural Research Company (Empresa de Pesquisa Agropecuaria de Minas Gerais - EPAMIG), with the aim of studying various aspects of oviposition by Quesada gigas (Hemiptera: Cicadidae). The number of branches with Q. gigas egg nests was analyzed, as well as the number of nests per branch, the eggs per nest and the diameter of the egg nest location on the branch. The preference for oviposition either on alive or dry branches and the size of the egg were assessed. Egg-laying occurred only on dry branches. The mean of the branch diameter on which the egg nests occurred was 2.5 +/- 0.53 mm. The number of eggs per nest averaged 13.2 +/- 4.9, and the number of egg nests per branch was 2.2 +/- 1.74. The eggs were 1.9 +/- 0.08 mm long by 0.5 +/- 0.04 mm wide. The largest diameters of the branches containing egg nests were found on the upper third of the trees, as well as the greatest amount of branches with egg nests, of egg nests per branch and of eggs per nest. The correlation relationship between all of the experiment variables was positive.