A new approach to soil classification mapping based on the spatial distribution of soil properties

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Discrimination of geomorphic surfaces with multivariate analysis of soil attributes in sandstone - basalt lithosequence

O conceito de superfície geomórfica permite uma interligação entre os diferentes ramos da ciência do solo, tais como geologia, geomorfologia e pedologia. Esta associação favorece a compreensão da distribuição espacial dos solos na paisagem, e torna possível compreender o comportamento dos atributos do solo, que estão principalmente relacionadas com a estratigrafia e formas do relevo. Assim, este estudo visa à aplicação da estatística multivariada para categorizar superfícies geomórficas em uma litossequência arenito-basalto, de modo a fornecer uma base para a avaliação do solo em áreas afins. A área de estudo está localizada no município de Pereira Barreto, São Paulo, Brasil. A área escolhida possui 530 hectares, onde foram localizadas e mapeadas três superfícies geomórficas (I, II e III). Na área, 134 amostras foram coletadas nas profundidades de 0,0-0,2 m e 0,8-1,0 m, foram determinados os conteúdos de areia, silte e argila, pH em CaCl2, conteúdo de MO, P, Ca, Mg, K, Al e H+Al. Com base nos resultados, foram realizadas a análise univariada e multivariada de variância, clusters e principal componente, a fim de comparar as três superfícies geomórficas. A análise estatística univariada dos atributos do solo não foi eficiente na identificação das três superfícies geomórficas. Utilizando-se os atributos físicos e químicos do solo, as técnicas estatísticas multivariada permitiram à separação dos três grupos de corpos naturais do solo que foram equivalentes as três superfícies geomórficas mapeadas. Estes resultados são interessantes, pois demonstram a viabilidade da utilização de classificação numérica das superfícies geomórficas para ajudar no mapeamento de solo.

Aerofotos convencionais e imagens orbitais TM/LANDSAT no mapeamento morfopedológico em Santa Bárbara D'Oeste (SP)

Foram estudados, com o auxílio de fotografias aéreas, aspectos qualitativos e quantitativos do relevo e da rede de drenagem de solos de uma área de Santa Bárbara D'Oeste, SP. Esta região compreende 14.625 ha, onde foram selecionadas bacias hidrográficas de 3ª ordem de ramificação e amostras circulares de 5km². As unidades de mapeamento simples ou associações de solos são: Latossolo Vermelho Escuro, Podzólico, Litossolo + Podzólico, Terra Roxa Estruturada + Latossolo Roxo distrófico. Após a caracterização das feições fisiográficas, da área de ocorrência desses solos, foram realizados dois mapas morfopedológicos. No primeiro utilizou-se fotografias aéreas verticais pancromáticas na escala 1: 35.000 (data de 25/6/78) e no segundo imagens orbitais do sensor Thematic Mapper do LANDSAT-5, nas bandas 3, 4 e 5 e composição colorida 3/4/5 na escala 1: 100.000 (data de 12/9/91). As análises qualitativas e quantitativas do relevo (índice de declividade média) e rede de drenagem (densidade de drenagem, freqüência de rios, razão de textura) mostraram-se eficientes na diferenciação das unidades de solo estudadas, tanto em bacias hidrográficas como em amostras circulares. A utilização de fotografias aéreas, permitiu maior riqueza de detalhes na precisão dos limites das unidades de mapeamento e no maior número de unidades de mapeamento discriminadas em relação as imagens orbitais. A composição colorida 3/4/5 permitiu diferenciar os Latossolos argilosos dos Latossolos de textura média, assim como o Latossolo Húmico.

Produtividade de madeira do eucalipto correlacionada com atributos do solo visando ao mapeamento de zonas específicas de manejo

The perfect spatial intervention to manage the cultivation of the land, deriving from specific regions of the soil mapping, increases the agricultural productivity, as well as its clear gain. The relationships, spatial and Pearson, between eucalyptus data plant with some physical and chemical attributes of soil, in the growing season of 2011, in Selviria County, Mato Grosso do Sul State, Brazil (20 degrees 20' S lat.; 51 degrees 24' W long.), were studied in order to obtain the one that could have the best relationship in order to improve the wood productivity. Thus, a geostatistical grid was installed for the soil and plant data collection, it contained 120 sample points, in plantation of Eucalyptus camaldulensis of 2 years old. The soil was a Dystrophic Red Latosol (Haplic Acrustox) whit slope of 0.025m m(-1). Due to their excellent relationship with wood productivity, the basis diameter of the crown and the bulk density showed management specific regions of soil whit high relation to eucalyptus wood productivity.

Mapeamento de solos atraves de imagens de radar e de satelite.

The objective of the present work was the improvement of the methodology for soil mapping through the drainage network with the aid of Landsat data. The drainage network of the area studied was delineated and the soils identified. The main problem of the method has been the characterization of the contact between soil units when it is not abrupt, and in this case field trips and the analysis of the relief has been used to solve doubts.-from English summary

Variaveis da ocupacao do solo e analise multivariada

Photointerpretative and multivariate statistical techniques were applied to variants of soil use measured in 4 hydrological basins of third order ramification, belonging to Tiete basin municipal district of Botucatu, Sao Paulo State. The aim was the grouping of basins of second degree of similarity, as well as to infer spatial distribution representativeness. The hydrological basins were located in 3 physiographic regions, with peripheric depression, cuesta front and cuesta backslope, embracing the following soil units: Regosol intergrade to Red Yellow Podzolic and intergrade to Red Yellow Latosol, Red Yellow Latosol-sandy phase, Litosol basaltic substract phase and Purple Latosol. The results obtained allow the conclusion that soil use not always reflects its fertility. -after English summary

Suscetibilidade magnética do solo e estimação da capacidade de suporte à aplicação de vinhaça

The objective of this work was to evaluate the magnetic susceptibility efficiency for estimating the support capacity of areas for vinasse application. Two hundred forty-one soil samples were collected from a 380-ha area, on which soil chemical properties, clay content, and magnetic susceptibility were determined. Vinasse requirement was calculated for each sample. Data were subjected to descriptive statistical analysis, and regression models were developed between magnetic susceptibility and the other evaluated attributes. The analysis of data spatial dependence was performed using geostatistics. Kriging maps and cross variograms were built in order to investigate the spatial correlation between soil magnetic susceptibility and studied attributes. Based on the map of vinasse requirement, on the soil classes, and on the kriging map, calculations were done for average vinasse dose and average soil support capacity, weighted by the area. Magnetic susceptibility has significant linear spatial correlation with recommended vinasse doses and soil support capacity for the application of this effluent, and it can be used as a pedotransfer function for indirect quantification of soil support capacity.

Mapeamento de atributos do solo para o planejamento da irrigação sob pivô central

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização ambiental da bacia hidrográfica do Córrego Rico, Jaboticabal - SP

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Erodibilidade de latossolos predita pela suscetibilidade magnética e espectroscopia de reflectância difusa

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Clay mineralogy and magnetic susceptibility of Oxisols in geomorphic surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtividade da cana-de-açúcar e definição de zonas específicas de manejo do solo

The correct spatial intervention in the administration of the plantation, arising from specific areas of soil mapping, can increase your productivity as well as profitability and yields in agriculture. The spatial and Pearson's relationships between sugarcane attributes and chemical attributes of a Typic Tropustalf were studied in the growing season of 2010, in Suzanapolis, State of Sao Paulo, Brazil (20 degrees 27'33 '' S lat.; 51 degrees 08'05 '' W long.), in order to obtain the attributes that had the best sugarcane productivity relationship. To this end, a geostatistical grid containing 118 sample points was installed for soil and plant data collection in an area of 10.5 ha with the third crop cut. The productivity of sugarcane (PRO) represented the attribute of the plant, while the attributes of the soil were: K+, Ca+2, Mg+2 and organic matter at depths of 0-0.20 m and 0.20-0.40 m. Relationships were calculated between the PRO and the attributes of the soil. Semivariograms were adjusted for all attributes, obtaining the respective krigings and the cross-validations. It was also made the cokrigings between the PRO and the soil attributes. The levels of the soil organic matter, for their evident substantial correlations, Sperman's Rho and spatial, with the productivity of sugarcane, are indicators of two specific areas of soil management strongly associated with the productivity of sugarcane. In such zones this productivity varies between 75.8-94.7 t ha(-1) and 101.0-119.9 t ha(-1), when the levels of organic matter respectively are 12.7-14.5 g dm(-3) (0-0.20 m) and 11.8-12.8 g dm(-3) (0.20-0.40 m).

Suscetibilidade magnética e análise de incertezas em mapeamento de solos

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Desenvolvimento de um aplicativo para processamento de imagens obtidas por fotografias aéreas

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Mapping of adhesion forces on soil minerals in air and water by atomic force spectroscopy (AFS)

The adhesion force between an atomic force microscope (AFM) tip and sample surfaces, mica and quartz substrates, was measured in air and water. The force curves show that the adhesion has a strong dependence on both the surface roughness and the environmental conditions surrounding the sample. The variability of the adhesion force was examined in a series of measurements taken at the same point, as well as at different places on the sample surface. The adhesion maps obtained from the distribution of the measured forces indicated regions contaminated by either organic compounds or adsorbed water. Using simple mathematical expressions we could quantitatively predict the adhesion force behavior in both air and water. The experimental results are in good agreement with theoretical calculations, where the adhesion forces in air and water were mostly associated with capillary and van der Waals forces, respectively. A small long-range repulsive force is also observed in water due to the overlapping electrical double-layers formed on both the tip and sample surfaces.