Geosynthetic-Reinforced Soil Structure Built to Restore Original Geometry of a 12 m High Slope After Failure Using Local Soil

This paper presents a study case in which a geosynthetic-reinforced soil (GRS) structure was used to rebuild a 12 m high slope after its failure. The failed slope is located between the parking lot of a private company and a public school. Due to surrounding structures restrictions, this project required a solution with rapidity in execution. In addition, as a requirement established by its owner, this structure should recover the original geometry of the slope. Besides the importance regarding surrounding constructions, an interesting aspect of this study case relies on the versatility of geosynthetic materials. A woven geotextile was used as reinforcement. Five other geosynthetic materials were used in this study case. Facing comprised a geocell filled with local soil cover and grass mats, resulting in a green facing. A geonet was used to hold the grass mats in place before grass roots development. Regarding the drainage system, geocomposite drains and geopipes were installed to drain subsurface water. A nonwoven geotextile was used as filter in drainage trenches, which were placed near the structure toe. Additionally to the GRS structure, the lower portion of the slope was reinforced with soil nailing technique. The face of the nailed soil portion was covered with sandbags and shotcrete. It emphasizes the flexibility of GRS structures regarding their application with other technical options in Geotechnical Engineering. The economic aspect of this study case also deserves attention. It did not require soil transportation and other design and construction steps, e.g. concrete structures design and construction.

Compactação do solo e produção de cultivares de milho em latossolo vermelho: I - características de planta, solo e índice S

Este trabalho teve como objetivo avaliar, em condições de campo, a resposta de duas cultivares de milho com características genéticas distintas em Latossolo Vermelho em seis níveis de compactação. O experimento foi conduzido em faixas, no delineamento de blocos completos casualizados, com quatro repetições. Utilizaram-se os híbridos de milho DKB 390 e DAS 2B710. Após a semeadura do milho, coletaram-se amostras indeformadas de solo nas profundidades de 0-10, 10-20 e 20-30 cm, para determinação de propriedades físicas do solo e índice S. No estádio de maturidade fisiológica dos grãos do milho, foram determinados: a altura das plantas, a altura de inserção da primeira espiga, o diâmetro do segundo colmo acima do solo e a massa de matéria seca das plantas. As espigas foram colhidas e debulhadas para determinação da produtividade de grãos, corrigida para a umidade-padrão de 13 %, calculando-se também o número de espigas por planta e o índice de colheita. O índice S apresentou correlação positiva com a produtividade, porém, abaixo do limite de S < 0,035, estabelecido para uma condição de solo desestruturado, ocorreram perdas acentuadas na produtividade de milho. Os híbridos simples de milho DKB 390 e DAS 2B710 não apresentaram diferenças quando submetidos aos diferentes níveis de compactação. A produtividade dos híbridos de milho foi significativamente menor quando a resistência do solo à penetração atingiu 2,15 MPa.

Avaliação dos atributos físicos de um Nitossolo Vermelho distroférrico sob sistema plantio direto, preparo convencional e mata nativa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alterations following a fire in a forest community of Alto Rio Xingu

This study records the consequences of fire upon the soil and structure of the Amazonian Forest of Gaucha do Norte, Mato Grosso state, Brazil (13degrees12'S and 53degrees20'W). For this, the number of individuals sampled in 1 ha of the forest, during a phytosociological survey completed 2 days before the accidental fire, was compared with the survivors recorded afterwards in the reinventory of the area taken 2 days and 10 months after the fire. For the surveys, the area of 1 ha was subdivided into 50 plots of 10 m x 20 m, and all the individuals with circumference at breast height (CBH) greater than or equal to 15 cm were sampled. Chemical analysis of the 30 soil samples collected 2 days before the fire were compared with those obtained 15 days and 1 year after the fire. It was seen that, soon after the fire, there was a significant increase in the nutrient levels in the soil, an increase in the pH and a decrease in the aluminum toxicity. However, after 1 year, losses by lixiviation resulted in a nutrient reserve in the soil of less than that before the fire. The tree mortality was extremely high (23.98%), particularly amongst the younger individuals of the population (93.68% of the total of deaths in the period). There was no significant reduction in the forest richness analyzed: 60% of the species had reduced populations after the fire, but just four species were locally extinct. Results, however, demonstrated a role for fire in the selection of resistant species or those adapted to fires, since some species demonstrated a greater tolerance to the fire than others. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Avaliação da capacidade de infiltração de solos submetidos a diferentes tipos de manejo

Inadequate vegetation and soil management leads to physical changes that affect aquifer recharge. The Araripe Plateau feeds an elevated number of springs on its northern slope; however, there are indications that their yield is decreasing. Through this research, it was studied the infiltration capacity of soils under different types of management. Soil samples from 21 sites were grouped into four groups. Group 1 represents areas of preserved vegetation, the others, anthropized ones. It was observed that soil moisture and infiltration capacity are linearly well correlated with organic matter; mean soil moisture during the dry season was significantly higher for Group 1 than for the other groups, even during the rainy season and anthropized areas show low organic matter contents, soil moisture, and infiltration capacity, indicating modifications in the soil's structure that reduce aquifer recharge.

Métodos de determinação da densidade do solo em diferentes sistemas de manejo

Soil bulk density is an attribute often used to characterize soil physical structure, being an indicator of soil compaction. The objective of this study was to compare the values ​​of bulk density measured by the paraffin sealed clod and volumetric ring methods in conventional, no-tillage and minimum tillage systems on a Dystroferric Red Nitosol, clayey, in Botucatu, SP. The experiment design was a 3x2 factorial arrangement in randomized block with four replications. The density values ​​obtained by the paraffin sealed clod method were statistically higher than those obtained by the volumetric ring method. There was no difference between the managements when comparing the values ​​of soil density obtained by the paraffin sealed clod method. The soil under conventional management showed lower density when comparing the values ​​of soil density obtained by the volumetric ring. The volumetric ring method was more sensitive to show differences between the management systems than the paraffin sealed clod method.

Estimation and evaluation of dynamic properties as indicators of changes on soil structure in sugarcane fields of São Paulo State - Brazil

The indiscriminate management and use of soils without moisture control has changed the structure of it due to the increment of the traffic by agricultural machines through the years, causing in consequence, a soil compaction and yield reduction in the areas of intensive traffic. The purpose of this work was to estimate and to evaluate the performance of preconsolidation pressure of the soil and shear stress as indicators of changes on soil structure in fields cropped with sugarcane, as well as the impact of management processes in an Eutrorthox soil structure located in São Paulo State. The experimental field was located in Piracicaba's rural area (São Paulo State, Brazil) and has been cropped with sugarcane, in the second harvest cycle. The soil was classified by Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) [Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA), 1999. Centro Nacional de Pesquisa de Solos. Sistema Brasileiro de Classificao de Solos, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA), Brasilia, 412 pp.] as an Eutrorthox. Undisturbed samples were collected and georeferenced in a grid of 60 m x 60 m from two depths: 0-0.10 m (superficial layer - SL) and in the layer of greatest mechanical resistance (LGMR), previously identified by cone index (CI). The investigated variables were pressure preconsolidation (sigma(p)), apparent cohesion (c) and internal friction angle (phi). The conclusions from the results were that the SLSC was predicted satisfactorily from up as a function of soil moisture; thus, decisions about machinery size and loading (contact pressures) can be taken. Apparent cohesion (c), internal friction angle (phi) and the Coulomb equation were significantly altered by traffic intensity. The sigma(p), c and phi maps were shown to be important tools to localize and visualize soil compaction and mechanical resistance zones. They constitute a valuable resource to evaluate the traffic impact in areas cropped with sugarcane in State of São Paulo, Brazil. (C) 2008 Elsevier B.V. All rights reserved.

Soil profile, relief features and their relation to structure and distribution of Brazilian Atlantic rain forest trees

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial variability structure of soil CO2 emission and soil attributes in a sugarcane area

Soil CO2 emission (F-CO2) is influenced by chemical, physical and biological factors that affect the production of CO2 in the soil and its transport to the atmosphere. F-CO2 varies in time and space depending on environmental conditions, including the management of the agricultural area. The aim of this study was to investigate the spatial variability structure of F-CO2 and soil attributes in a mechanically harvested sugarcane area (green harvest) using fractal dimension (D-F) derived from isotropic variograms at different scales (fractograms). F-CO2 showed an overall average of 1.51 mu mol CO2 m(-2) s(-1) and correlated significantly (P < 0.05) with soil physical attributes, such as soil bulk density, air-filled pore space, macroporosity and microporosity. Topologically significant DF values were obtained from the characterization of F-CO2 at medium and large scales (above 20 m), with values of 2.92 and 2.90, respectively. The variations in D-F with scales indicate that the spatial variability structure of F-CO2 was similar to that observed for soil temperature and total pore volume and was the inverse of that observed for other soil attributes, such as soil moisture, soil bulk density, microporosity, air-filled pore space, silt and clay content, pH, available phosphorus and the sum of bases. Thus, the spatial variability structure of F-CO2 presented a significant relationship with the spatial variability structure for most soil attributes, indicating the possibility of using fractograms as a tool to better describe the spatial dependence of variables along the scale. (C) 2014 Elsevier B.V. All rights reserved.

Effects in mechanical properties and structure of the soil tillage with rotary paraplow

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects in mechanical properties and structure of the soil after tillage with rotary paraplow

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fractal dimension and anisotropy of soil CO2 emission in a mechanically harvested sugarcane production area

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

GPS receivers for georeferencing of spatial variability of soil attributes

A caracterização da variabilidade espacial dos atributos do solo é indispensável para subsidiar práticas agrícolas de maneira sustentável. A utilização da geoestatística para caracterizar a variabilidade espacial desses atributos, como a resistência mecânica do solo à penetração (RP) e a umidade gravimétrica do solo (UG), é, hoje, prática usual na agricultura de precisão. O resultado da análise geoestatística é dependente da densidade amostral e de outros fatores, como o método de georreferencimento utilizado. Desta forma, o presente trabalho teve como objetivo comparar dois métodos de georreferenciamento para a caracterização da variabilidade espacial da RP e da UG, bem como a correlação espacial dessas variáveis. Foi implantada uma malha amostral de 60 pontos, espaçados em 20 m. Para as medições da RP, utilizou-se de penetrógrafo eletrônico e, para a determinação da UG, utilizou-se de trado holandês (profundidade de 0,0-0,1 m). As amostras foram georreferenciadas, utilizando-se do método de Posicionamento por Ponto Simples (PPS), com de (retirar) receptor GPS de navegação, e Posicionamento Relativo Semicinemático, com receptor GPS geodésico L1. Os resultados indicaram que o georreferenciamento realizado pelo PPS não interferiu na caracterização da variabilidade espacial da RP e da UG, assim como na estrutura espacial da relação dos atributos.

Crop type influences soil aggregation and organic matter under no-tillage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Compositional analysis for an unbiased measure of soil aggregation

Soil aggregation is an index of soil structure measured by mean weight diameter (MWD) or scaling factors often interpreted as fragmentation fractal dimensions (D-f). However, the MWD provides a biased estimate of soil aggregation due to spurious correlations among aggregate-size fractions and scale-dependency. The scale-invariant D-f is based on weak assumptions to allow particle counts and sensitive to the selection of the fractal domain, and may frequently exceed a value of 3, implying that D-f is a biased estimate of aggregation. Aggregation indices based on mass may be computed without bias using compositional analysis techniques. Our objective was to elaborate compositional indices of soil aggregation and to compare them to MWD and D-f using a published dataset describing the effect of 7 cropping systems on aggregation. Six aggregate-size fractions were arranged into a sequence of D-1 balances of building blocks that portray the process of soil aggregation. Isometric log-ratios (ilrs) are scale-invariant and orthogonal log contrasts or balances that possess the Euclidean geometry necessary to compute a distance between any two aggregation states, known as the Aitchison distance (A(x,y)). Close correlations (r>0.98) were observed between MWD, D-f, and the ilr when contrasting large and small aggregate sizes. Several unbiased embedded ilrs can characterize the heterogeneous nature of soil aggregates and be related to soil properties or functions. Soil bulk density and penetrater resistance were closely related to A(x,y) with reference to bare fallow. The A(x,y) is easy to implement as unbiased index of soil aggregation using standard sieving methods and may allow comparisons between studies. (C) 2012 Elsevier B.V. All rights reserved.