Sistemas certificáveis de gestão ambiental e da qualidade: práticas para integração em empresas do setor moveleiro

O principal objetivo deste artigo é propor, a partir do referencial teórico e de um estudo de caso em uma empresa moveleira, práticas para integração de sistemas certificáveis de gestão ambiental e da qualidade. A coleta de dados do estudo de caso se deu por meio de entrevistas semiestruturadas com o responsável direto pelos dois sistemas e com alguns colaboradores-chave do nível operacional, além de análise documental e de visitas in loco. Ao final deste artigo, são propostas práticas para integração desses sistemas, relacionadas aos seguintes elementos: alta administração; apoio administrativo, financeiro e pessoal; serviço de consultoria; coordenação do programa de integração; interface entre os sistemas; capacitação técnico-gerencial; sistema de liderança, prospecção, avaliação e desenvolvimento de fornecedores; sistema de informação; indicadores; comunicação com o cliente, e integração contínua.

Implantação de sistemas de gestão ambiental ISO 14001: uma contribuição da área de gestão de pessoas

Os sistemas certificáveis de gestão ambiental, como a norma ISO 14001, têm sido uma opção cada vez mais utilizada pelas organizações para equacionarem suas demandas ambientais, padronizarem seu processo produtivo, reduzirem custos de produção e melhorarem sua imagem. Entretanto, seu processo de implantação em indústrias gera mudanças significativas na cultura e estrutura destas empresas e devem ser devidamente consideradas por gestores e consultores. Pelo exposto, o principal objetivo deste artigo é apresentar práticas, sistematizadas à luz da teoria com especial contribuição da área de gestão de pessoas e com base em dois estudos de caso, para implantação de sistemas de gestão ambiental ISO 14001 em empresas industriais. Para tanto, foram realizados dois estudos de caso: um em uma empresa de baterias automotivas e outro em uma empresa moveleira. Os dados foram coletados a partir de entrevistas semiestruturadas com os gestores diretamente responsáveis por estes sistemas e com colaboradores-chave, observação in loco e análise de documentos. Ao final do artigo são apresentadas sugestões de práticas relacionadas aos seguintes elementos: alta direção, gestão de pessoas, comitê de gestão ambiental, missão e políticas, treinamento e comunicação.

Modelagem do problema integrado de dimensionamento de lotes e corte de estoque em indústria moveleira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Panels Produced from Thermoplastic Composites Reinforced with Peach Palm Fibers for Use in the Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aim at the production of panels made from industrial waste -thermoplastic (polypropylene; polyethylene and acrylonitrile butadiene styrene) reinforced with agro-industrial waste - peach palm waste (shells and sheaths). The properties of the panels like density, thickness swelling, water absorption and moisture content were evaluated using the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. Good results were obtained with formulations of 100% plastic waste; 70% waste plastics and 30% peach palm waste; and 60% waste plastics and 40% peach palm waste.

HACCP plan proposal for a typical Brazilian peanut processing company

Peanuts are likely to be infested by fungi with consequent contamination by aflatoxin in post-harvest industries. A hazard analysis critical control point (HACCP) plan is proposed for a typical Brazilian post-harvest industry from raw in-shell reception to the unpeeled peanuts transportation. Codex Alimentarius Commission guidelines were followed, with four critical control points (CCP) for aflatoxin being identified. The process steps with highest probability of aflatoxin occurrence (risk) are the in-shell reception, the dried in-shell storage, and the unpeeled kernel storage. During the storage steps there is a lack of control of air moisture and temperature. Therefore, there is no option but to keep rigid monitoring and control over each CCP, and detour lots with high aflatoxin levels to either oil or seed production. Attempts to correlate the aflatoxin levels with the rainfall showed an irregular trend of the toxin level. (c) 2008 Elsevier Ltd. All rights reserved.

Work and injuries in dancers: Survey of a professional dance company in Brazil

This study examined the daily life and most important physical injuries suffered and reported by the dancers of a professional (contemporary) dance company in S (a) over tilde $o Paulo, Brazil. Through an observational, cross,sectional, retrospective procedure using a questionnaire that collected qualitative and quantitative data, we were able to gather information on 30 dancers who collaborated with the survey. We determined that the injuries considered as most important by dancers were those that prevented dance activity during some months. These injuries occurred mainly during rehearsals (which is the activity occuppying, the most time on the schedule). Articular injuries were the most frequent and mainly involved the knee and ankle. They were related to classical technique, in which most of the company's artists started their dance careers. Medical care usually was sought within 1 day, and the prescribed treatment resolved the problem, but the injury cause was not identified in all cases.

Alternatives Panels from Waste Plastics Reinforced With Fibers of Pupunha Palm for Use in Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aims at the production of panels made from industrial waste -thermoplastic (Polypropylene - PP; Polyethylene - PE and Acrylonitrile Butadiene Styrene - ABS) reinforced with agro-industrial waste - pupunha palm waste (shells and sheaths). The properties of the panels were evaluated: density, thickness swelling, water absorption and moisture content. It was used the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. The best results in physical tests were treatments 1 (100% waste plastic), 6 (60% plastic waste and 40% waste of pupunha) and 7 (70% waste plastic and 30% waste of pupunha). The best results in the mechanical tests were treatments 3 (30% de residuos plasticos e 70% de residuos da pupunha), 4 (40% de residuos plasticos c 60% de residuos da pupunha) and 5 (50% de residuos plasticos e 50% de residuos da pupunha). For mechanical tests it was concluded that the results of modulus of rupture and of modulus of elasticity the best treatments were those with more fibers. In the tensile tests perpendicular to the surface, it is clear that using more waste plastics leads to the best results. It was concluded that the waste can be used as raw material for the production of alternative materials mainly in civil construction and furniture industries, and it can be employed in urban or rural environment, given the concept of eco-efficient products.

Ergonomic research applied in the design of pre-school furniture: The Mobipresc 3.6

This research describes the application of a scientific and technological model of Ergonomics in the design of pre-school furniture. The constant presence of the desk in early education and its influence in the relationship between the user and his educational environment determined the necessity of this project. The pre-school desk was considered as a work station, where the joint aspects of education and child anthropometry substantiate the problem. The review of the Historical application of Ergonomics in the Design of children's products consolidated the importance of this report. The development of ergonomic research, characterised by investigations of the Brazilian child's Anthropometry Data and Biomechanical Features, resulted in dimensional parameters of the user and physical characteristics of the present furniture. These elements, together with a comprehension of activities and needs in the pre-school, were connected with aspects of bibliographical revision to result in a series of recomendations for design. Through the methods of Ergonomic Design, a new proposal for the pre-school desk was developed, denominated Mobipresc 3.6.

Integration in new product development: Case study in a large Brazilian high-technology company

Proficiency in management activities undertaken in product development processes is regarded as a key competitive advantage for companies, particularly for high-tech industrial firms, which benefit from the important competitiveness factor of launching products with a differentiated technological content. This paper's objective was to identify, through case study, practices for integration between the roles of R & D with others involved in product development in a large Brazilian company of industrial automation. The results suggest some management practices to improve the integration in new products development, such as the use of employees from marketing with knowledge and experience previously gained from R & D activities and uses the heavyweight product manager to solve synchronization problems between product and technology development. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Multi-choice mixed integer goal programming optimization for real problems in a sugar and ethanol milling company

Goal Programming (GP) is an important analytical approach devised to solve many realworld problems. The first GP model is known as Weighted Goal Programming (WGP). However, Multi-Choice Aspirations Level (MCAL) problems cannot be solved by current GP techniques. In this paper, we propose a Multi-Choice Mixed Integer Goal Programming model (MCMI-GP) for the aggregate production planning of a Brazilian sugar and ethanol milling company. The MC-MIGP model was based on traditional selection and process methods for the design of lots, representing the production system of sugar, alcohol, molasses and derivatives. The research covers decisions on the agricultural and cutting stages, sugarcane loading and transportation by suppliers and, especially, energy cogeneration decisions; that is, the choice of production process, including storage stages and distribution. The MCMIGP allows decision-makers to set multiple aspiration levels for their problems in which the more/higher, the better and the less/lower, the better in the aspiration levels are addressed. An application of the proposed model for real problems in a Brazilian sugar and ethanol mill was conducted; producing interesting results that are herein reported and commented upon. Also, it was made a comparison between MCMI GP and WGP models using these real cases. © 2013 Elsevier Inc.

The integrated lot sizing and cutting stock problem in a furniture factory

This work studies the integrated lot sizing and cutting stock problem, where the goal is to capture the dependency that exists between two important decisions in the production process, in order to economize raw materials and also reduce production and inventory costs. The integrated lot sizing and cutting stock problem is studied in a small furniture factory that produces wardrobes, dressing tables and cupboards and the lot sizing and cutting stock decisions are taken by the production manager. A column-generation technique is used to solve a linear relaxation of the proposed model. The computational results, using real data from the factory, show that it is possible to reduce total inventory and raw material costs when integrated planning is used. © 2013 IFAC.

Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use. © 2013 Elsevier B.V. All rights reserved.

Estudo de caso do setor de tecelagem de uma indústria de fiação de seda, abordando pontos da ergonometria

Pós-graduação em Design - FAAC

Práticas para implantação de sistemas de gestão ambiental certificáveis: um enfoque na gestão de pessoas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)