Ion beam analysis of a-C:H films on alloy steel substrate

An a-C:H thin film deposited by plasma immersion ion implantation and deposition on alloy steel (16MnCr5) was analyzed using a self-consistent ion beam analysis technique.In the self-consistent analysis, the results of each individual technique are combined in a unique model, increasing confidence and reducing simulation errors.Self-consistent analysis, then, is able to improve the regular ion beam analysis since several analyses commonly used to process ion beam data still rely on handling each spectrum independently.The sample was analyzed by particle-induced x-ray emission (for trace elements), elastic backscattering spectrometry (for carbon), forward recoil spectrometry (for hydrogen) and Rutherford backscattering spectrometry (for film morphology).The self-consistent analysis provided reliable chemical information about the film, despite its heavy substrate.As a result, we could determine precisely the H/C ratio, contaminant concentration and some morphological characteristics of the film, such as roughness and discontinuities.© 2013 Elsevier B.V.All rights reserved.

Competences in the classroom in the perspectives of foreign language teachers

In this article we raise some considerations about teachers’ competences, from the perspective of teachers in the Brazilian public sector. The theoretical framework includes articles by Paulo Freire (2001), Philippe Perrenoud (2012), Edgar Morin (2003) and Maurice Tardif (2002) and, based on these authors, we reflect upon issues concerning teachers’ competences taking answers provided by the Brazilian language teachers as a departing point. In a teachers’ course, followed by the same teachers, we posed the main question in our study: Which competences are necessary for a teacher to be considered a good professional at present? From the answers given individually and group discussions we proceeded to a comparative analysis with the adopted framework, and other issues concerning teachers’ competences were considered as well. All the participants mentioned the same two competences, the use of technology and sound knowledge of the course content, and other competences were pointed out by the various teachers as well. Such procedure, besides providing data for our study, also helped as a self-reflexive activity for the teachers involved, about their own professional performance. Given the issues raised in the theoretical texts and the answers provided by the teachers, we expect to revisit the competences necessary for foreign language teacher efficient performance.

Avaliação em saúde: reflexões inscritas no paradigma sanitário contemporâneo

O presente estudo apresenta uma análise reflexiva dos métodos de avaliação em saúde em uma perspectiva do cuidado pensado e praticado segundo as necessidades dos usuários. Várias são as formas e abordagens dos processos avaliativos na busca de uma melhor apreensão do objeto de avaliação; neste contexto, a satisfação do usuário surge como um indicador de qualidade dos serviços de saúde, ligada à maior adequação e promoção de reais mudanças nas práticas de saúde. Diante da inovadora proposta do Programa Saúde da Família (PSF), baseado nos princípios de integralidade, cuidado à saúde e humanização, a participação e a satisfação do usuário surgem como elementos-chave na formulação de suas ações, possibilitando mudanças no modelo assistencial hegemônico, a saber, positivista, assistencialista e curativista. A presença do usuário no processo avaliativo irá permitir uma peculiar atuação, remodelando as práticas de saúde - quiçá tornando-as mais humanas, acolhedoras e, conseqüentemente, mais resolutivas..

A vocação auto-reflexiva da antropologia no Brasil: um retrato de sua historiografia a partir da década de oitenta

Pós-graduação em Ciências Sociais - FFC

Viés egotímico: percepções de discentes do curso de pedagogia de uma universidade pública estadual de Mato Grosso e professores egressos em exercício

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seminários de Voz da PUC-SP: análise da trajetória entre os anos de 1993 a 2009

This is a reflexive analysis of the Voice Seminaries at PUC SP, realized between 1993 and 2009. The analysis points out to the involvement of the organizers, talkers and participants with the theme “occupational voice”.Each year, the suggestion of subjects occured methodically, conducted by events and by the direction of the late year seminary, or stimulated by a new proposition. During these years, it was observed the effort made towards a social modification, in this case, a government recognition of the vocal disorder as a desease related to working conditions of determined professional categories which use voice intensily.

Lirismo, tradição e autorreflexividade crítica na poesia de Paulo Henriques Britto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Etch and rinse versus self-etching adhesives systems: Tridimensional micromechanical analysis of dentin/adhesive interface

The purpose of this study was to evaluate stress distribution in the hybrid layer produced by two adhesive systems using three-dimensional finite element analysis (FEA). Four FEA models (M) were developed: Mc, a representation of a dentin specimen (41 x 41 x 82 mu m) restored with composite resin, exhibiting the adhesive layer, hybrid layer (HL), resin tags, peritubular dentin, and intertubular dentin to simulate the etch-and-rinse adhesive system; Mr, similar to Mc, with lateral branches of the adhesive; Ma, similar to Mc, however without resin tags and obliterated tubule orifice, to simulate the environment for the self-etching adhesive system; Mat, similar to Ma, with tags. A numerical simulation was performed to obtain the maximum principal stress (sigma(max)). The highest sigma(max) in the HL was observed for the etch-and-rinse adhesive system. The lateral branches increased the sigma(max) in the HL. The resin tags had a little influence on stress distribution with the self-etching system. (C) 2012 Elsevier Ltd. All rights reserved.

Fabrication and analysis of self-assembled photonic crystals structures

This paper presents the fabrication and analysis of a three-dimensional FCC photonic crystal (PhC) based on a self-assembly synthesis of monodispersive latex spheres. Experimental optical characterization, achieved by measurements of the specular reflectance under variable angles, indicated the clear presence of a Bragg diffraction pattern. Results are further explored by theoretical calculations based on the Finite Difference Time Domain (FDTD) method to determine the full PhC band structure.

Influence of voids in the hybrid layer based on self-etching adhesive systems: a 3-D FE analysis

The presence of porosities at the dentin/adhesive interface has been observed with the use of new generation dentin bonding systems. These porosities tend to contradict the concept that etching and hybridization processes occur equally and simultaneously. Therefore, the aim of this study was to evaluate the micromechanical behavior of the hybrid layer (HL) with voids based on a self-etching adhesive system using 3-D finite element (FE) analysis. Three FE models (Mr) were built: Mr, dentin specimen (41x41x82 μm) with a regular and perfect (i.e. pore-free) HL based on a self-etching adhesive system, restored with composite resin; Mp, similar to M, but containing 25% (v/v) voids in the HL; Mpp, similar to Mr, but containing 50% (v/v) voids in the HL. A tensile load (0.03N) was applied on top of the composite resin. The stress field was obtained by using Ansys Workbench 10.0. The nodes of the base of the specimen were constrained in the x, y and z axes. The maximum principal stress (σmax) was obtained for all structures at the dentin/adhesive interface. The Mpp showed the highest peak of σmax in the HL (32.2 MPa), followed by Mp (30 MPa) and Mr (28.4 MPa). The stress concentration in the peritubular dentin was high in all models (120 MPa). All other structures positioned far from voids showed similar increase of stress. Voids incorporated into the HL raised the σmax in this region by 13.5%. This behavior might be responsible for lower bond strengths of self-etching and single-bottle adhesives, as reported in the literature.

Comparative analysis between experimental characterization results and numerical fdtd modeling of self-assembled photonic crystals

This paper presents a comparative analysis between the experimental characterization and the numerical simulation results for a three-dimensional FCC photonic crystal (PhC) based on a self-assembly synthesis of monodispersive latex spheres. Specifically, experimental optical characterization, by means of reflectance measurements under variable angles over the lattice plane family [1,1, 1], are compared to theoretical calculations based on the Finite Di®erence Time Domain (FDTD) method, in order to investigate the correlation between theoretical predictions and experimental data. The goal is to highlight the influence of crystal defects on the achieved performance.

Analysis of the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel

Objective: To analyze the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel. Material and Method: Twenty-four healthy human molars extracted for orthodontic reasons, were sectioned in the mesio-distal direction and divided into two groups (n=24) according to the sealant to be applied: GI - conventional sealant Climpro (3M/ESPE) and GII - self-etching sealant Enamel Loc (Premier Dental). The sealants were applied on flattened enamel in matrixes 1 mm in diameter, in accordance with the manufacturers' recommendations. The specimens were stored in distilled water at 37°C for 24 hours. After this, half the samples of both groups were submitted to 500 thermal cycles in 30s baths at temperatures between 5 and 55°C. Forty-eight hours after the samples were made, the microtensile shear test was performed in an Instron 4411 test machine, with a stainless steel wire with a cylindrical cross section of 0.2mm in diameter at a constant speed of 0.5mm/s. The bond strength values were submitted to ANOVA for 2 factors and the fracture patterns were examined under an optical microscope at 65X magnification. Results: Thermal cycling did not influence the bond strength of the two sealants. The conventional sealant Climpro presented a statistically higher microtensile shear bond strength (11.72MPa, 11.34MPa with and without cycling, respectively) than the self-etching sealant Enamel Loc (5.92MPa, 5.02MPa with and without cycling, respectively). Fracture pattern analysis showed the occurrence of 100% of adhesive failures for Enamel Loc, while the conventional sealant Climpro presented 95% of adhesive failures and 5% of mixed failures. Conclusion: The conventional sealant presented higher microtensile shear bond strength to dental enamel in comparison with the self-etching sealant. Thermal cycling did not affect the bond strength of the sealants used in this study. © 2011 Nova Science Publishers, Inc.

Cladistic analysis of self-grooming indicates a single origin of eusociality in corbiculate bees (Hymenoptera: Apidae)

Behavioural traits have been used extensively in recent years as an important character source for making phylogenetic inferences. The phylogenetic positions of the members of the Apini subtribe are increasingly being debated, and new characters must be examined. We analysed the presence and absence of certain behavioural patterns, as well as the sequences of some of these patterns, to generate 79 characters. Eleven species comprised the ingroup, and Xylocopini comprised the outgroup. Parsimony analysis showed that the most parsimonious tree was (Euglossina(Bombina(Apina+Meliponina))). This topology is consistent with most studies that use morphological data and the few that use behavioural data, which suggests that advanced eusociality arose only once in a common ancestor of the clade Apina plus Meliponina; however, this hypothesis is inconsistent with our molecular data. Thus we considered behavioural, molecular, and morphological data and recovered the same topology, in which eusociality has a single origin in corbiculate bees.

Effect of Er:YAG laser and diamond drill on hybrid layer morphology obtained with self-etch adhesive: analysis by SEM and confocal laser scanning microscopy (CLSM)

This study aimed to evaluate the effect of Er:YAG (L) and diamond drills (DD) on: 1) the microshear bond strength (MPa); 2) the adhesive interface of two-step (TS) – Adper Scotchbond Multipurpose and one-step (OS) adhesives – Adper EasyOne, both from 3M ESPE. Material and methods: According to the preparation condition and adhesives, the samples were divided into four groups: DD_TS (control); DD_OS; L_TS and L_OS. 60 bovine incisors were randomly divided into experimental and groups: 40 for microshear bond strength (n = 10) and 20 for the adhesive interface morphology [6 to measure the thickness of the hybrid layer (HL) and length of tags (t) by CLSM (n = 3); 12 to the adhesive interface morphology by SEM (n = 3) and 2 to illustrate the effect of the instruments on dentine by SEM (n = 1)]. To conduct the microshear bond strength test, four cylinders (0.7 mm in diameter and 1 mm in height with area of adhesion of 0.38 mm) were constructed with resin composite (Filtek Z350 XT – 3M ESPE) on each dentin surface treated by either L or DD and after adhesives application. Microshear bond strength was performed in universal testing machine (EMIC 2000) with load cell of 500 kgf and a crosshead speed of 0.5 mm / min. Adhesive interface was characterized by thickness of hybrid layer (HL) and length of tags (t) in nm, with the aid of UTHSCSA ImageTool software. Results: Microshear bond strength values were: L_TS 34.10 ± 19.07, DD_TS 24.26 ± 9.35, L_OS 33.18 ± 12.46, DD_OS 21.24 ± 13.96. Two-way ANOVA resulted in statistically significant differences only for instruments (p = 0.047). Mann-Whitney identified the instruments which determined significant differences for HL thickness and tag length (t). Concerning to the adhesive types, these differences were only observed for (t). Conclusion: It can be concluded that 1) laser Er:YAG results in higher microshear bond strength values regardless of the adhesive system (TS and OS); 2) the tags did not significant affect the microshear bond strength; 3) the adhesive interface was affected by both the instruments for cavity preparation and the type of adhesive system used.

Depression by inbreeding after four sucessive self-pollination squash generations

The strategy for breeding F-1 hybrid squash is to develop parental lines through self-pollination. However, it increases plant mean homozygosis, which is not the natural genetic state of a cross-pollinated species, and can cause inbreeding depression. The objective of this work was to evaluate this depression with sucessive generations of self-pollination (without selection) in Cucurbita moschata, cv. Piramoita. Populations were obtained from lines with one to four generations of self-pollination (obtained by the SSD method), from the original cv. Piramoita (population SO). Randomized blocks were used with five treatments (different generations of self-pollination -S-0 to S-4), six replicates and five plants per plot. Regression analysis was made by the Wright inbreeding coefficient (F) to measure the homozygosis level effect on vigor loss. There was a linear reduction of mean weight and fruit length, seed production (number and weight) per fruit with the increase of the homozygosis level; however inbreeding did not affect seed quality (weight of 100 seeds and germination).