Induced polarization, resistivity, and self-potential: a case history of contamination evaluation due to landfill leakage

This article compares the efficiency of induced polarization (IP) and resistivity in characterizing a contamination plume due to landfill leakage in a typical tropical environment. The resistivity survey revealed denser electrical current flow that induced lower resistivity values due to the high ionic content. The increased ionic concentration diminished the distance of the ionic charges close to the membrane, causing a decrease in the IP phenomena. In addition, the self-potential (SP) method was used to characterize the preferential flow direction of the area. The SP method proved to be effective at determining the flow direction; it is also fast and economical. In this study, the resistivity results were better correlated with the presence of contamination (lower resistivity) than the IP (lower chargeability) data.

Relationship between age of waste and natural electric potential generation in Sanitary Landfill

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação integrada de métodos geofísicos em uma área de disposição de resíduos sólidos urbanos em Bauru-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Métodos e técnicas geoelétricas rasas na delimitação de área afetada por ruptura em teto de túnel urbano

Este trabalho apresenta um uso da geofísica aplicada em uma situação de ambiente urbano. O objetivo dos levantamentos foi o de delimitar a extensão da zona afetada por um colapso e desmoronamento do teto de um túnel em construção sob o Parque do Ibirapuera na capital paulista. São descritos e apresentados os resultados obtidos através do emprego dos métodos geofísicos geoelétricos e suas técnicas, em uma situação emergencial e de risco em uma área urbana na cidade de São Paulo. Também são comparadas as técnicas/arranjos de campo e a forma de apresentação e interpretação dos mesmos. Os métodos empregados foram a Eletrorresistividade, Polarização Induzida (IP) e Potencial Espontâneo (SP). Os trabalhos de campo e interpretação preliminar foram efetuados em apwenas um fim de semana (sábado e domingo). Os resultados mostraram-se plenamente satisfatórios e possibilitaram significativa redução nos custos nas obras de remediação da área do incidente, cuja área decresceu da inicialmente estimada pela engenharia (20x20 m) para 3x5 m definida pelos estudos geofísicos.

Estudo geofísico em aterro controlado disposto sobre rochas fraturadas

Geophysical survey is an important method for investigation of contaminated areas used in the characterization of contrasting physical properties in the presence of pollutants. This work applied the geophysical methods of Electrical Resistivity and Self Potential in waste landfill, located in Caçapava do Sul city, RS. The landfill is located over fractured metamorphic rocks. Eight lines of electrical profiling with 288 measures of self potential were done. In addition, 83 measurements of direction and dip of fractures were taken. The application of spontaneous potential method permitted to detect the direction of groundwater flow. The electrical resistivity measurements allowed the identification of low-intensity anomalies associated with the presence of leachate. There is a relationship between anomalous zones and the directions of fractures.

Self-trapping of a Fermi superfluid in a double-well potential in the Bose-Einstein-condensate-unitarity crossover

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rheological, Mechanical and Adhesive Properties of Surfactant-Containing Systems Designed as a Potential Platform for Topical Drug Delivery

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effective action for QED with fermion self-interaction in D=2 and D=3 dimensions

In this work we discuss the effect of the quartic fermion self-interaction of Thirring type in QED in D=2 and D=3 dimensions. This is done through the computation of the effective action up to quadratic terms in the photon field. We analyze the corresponding nonlocal photon propagators nonperturbatively in k/m, where k is the photon momentum and m the fermion mass. The poles of the propagators were determined numerically by using the MATHEMATICA software. In D=2 there is always a massless pole whereas for strong enough Thirring coupling a massive pole may appear. For D=3 there are three regions in parameter space. We may have one or two massive poles or even no pole at all. The interquark static potential is computed analytically in D=2. We notice that the Thirring interaction contributes with a screening term to the confining linear potential of massive two-dimensional QED (QED(2)). In D=3 the static potential must be calculated numerically. The screening nature of the massive QED(3) prevails at any distance, indicating that this is a universal feature of D=3 electromagnetic interaction. Our results become exact for an infinite number of fermion flavors.

Physicochemical characterization of collagen fibers and collagen powder for self-composite film production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Floral biology and late-acting self-incompatibility in Jacaranda racemosa (Bignoniaceae)

Breeding-system studies have been conducted with 38 of the approximately 800 species of Bignoniaceae, and self-incompatibility was found in 31 of these. In species for which the site of self-incompatibility barrier was studied, self-pollinated flowers consistently failed to develop into fruits, even though pollen tubes grew down to the ovary and penetrated most of the ovules. In this study, we have investigated the. oral biology and the breeding system in Jacaranda racemosa Chamisso, with hand-pollination experiments and the histology of post-pollination events. Flower anthesis lasted 1-3 days, and although the frequency of flower visitation was extremely low, natural pollination seemed to be effected mainly by medium-sized bees. Because the conspicuous staminodium favours eventual pollination by small bees, a possible role of the staminodium in the increase of potential pollinators is suggested. Hand-pollinations indicated that J. racemosa is a self-sterile species. Histological analysis of post-pollination events indicated the occurrence of a kind of late-acting self-incompatibility in which the processes of ovule penetration, fertilisation and endosperm initiation were slower in selfed than in crossed pistils. Until the time of self-pollinated pistil abscission, no signs of endosperm malfunction or proembryo development were observed in selfed pistils. Therefore, inbreeding depression is an unlikely explanation for self-sterility in J. racemosa.

INFLUENCE of DIFFERENT SURFACE CONDITIONING PROTOCOLS on MICROTENSILE BOND STRENGTH of SELF-ADHESIVE RESIN CEMENTS TO DENTIN

Statement of problem. According to manufacturers, bonding with self-adhesive resin cements can be achieved without any pretreatment steps such as etching, priming, or bonding. However, the benefit of saving time with these simplified luting systems may be realized at the expense of compromising the bonding capacity.Purpose. The purpose of this study was to assess whether different dentin conditioning protocols influence the bond performance of self-adhesive resin cements to dentin.Material and methods. Flat dentin surfaces from 48 human molars were divided into 4 groups (n=12): 1) control, no conditioning; 2) H(3)PO(4), etching with 37% H(3)PO(4) for 15 seconds; 3) SEBond, bonding with self-etching primer adhesive (Clearfil SE Bond); and 4) EDTA, etching with 0.1M EDTA for 60 seconds. The specimens from each dentin pre-treatment were bonded using the self-adhesive cements RelyX Unicem, Maxcem or Multilink Sprint (n=4). The resin-cement-dentin specimens were stored in water at 37 degrees C for 7 days, and serially sectioned to produce beam specimens of 1.0 mm(2) cross-sectional area. Microtensile bond strength (mu TBS) testing was performed at 1.0 mm/min. Data (MPa) were analyzed by 2-way ANOVA and Tukey multiple comparisons test (alpha=.05). Fractured specimens were examined with a stereomicroscope (x40) and classified as adhesive, mixed, or cohesive. Additional bonded interfaces were evaluated under a scanning electron microscope (SEM).Results. Cement-dentin mu TBS was affected by the dentin conditioning approach (P <.001). RelyX Unicem attained statistically similar bond strengths to all pre-treated dentin surfaces. H(3)PO(4)-etching prior to the application of Maxcem resulted in bond strength values that were significantly higher than the other groups. The lowest mu TBS were attained when luting Multilink Sprint per manufacturers' recommendations, while H(3)PO(4)-etching produced the highest values followed by Clearfil SE bonding and EDTA. SEM observations disclosed an enhanced potential of the self-adhesive cements to form a hybrid layer when applied following manufacturer's instructions.Conclusions. When evaluated self-adhesive resin cements are used, selectively etching dentin with H(3)PO(4) prior to luting results in the most effective bonding. (J Prosthet Dent 2011;105:227-235)

The Fermi pseudo-potential in one dimension

Wu and Yu recently examined point interactions in one dimension in the form of the Fermi pseudo-potential. on the other hand there are point interactions in the form of self-adjoint extensions (SAEs) of the kinetic energy operator. We examine the relationship between the point interactions in these two forms in the one-channel and two-channel cases. In the one-channel case the pseudo-potential leads to the standard three-parameter family of SAEs. In the two-channel case the pseudo-potential furnishes a ten-parameter family of SAEs.

Effective potential in curved space and cut-off regularizations

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bisphenol A removal from wastewater using self-organized TIO2 nanotubular array electrodes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Removal of sunscreen compounds from swimming pool water using self-organized TiO2 nanotubular array electrodes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)