Economic viability and selection of irrigation systems using simulation and stochastic dominance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Intercommissural width in 4 racial groups as a guide for the selection of maxillary anterior teeth in complete dentures

Purpose: To determine whether intercommissural width is a reliable guide for the selection of maxillary denture teeth width. Materials and Methods: Casts were made of 160 subjects from 4 different racial groups. Locations of intercommissural width landmarks (the corners of the mouth) were made on the subjects and transferred to the casts. The distances between the corners of the mouth and the distal of the canines were measured on the casts and compared. Results: A weak correlation was found between the distal of the canines and the distance between the corners of the mouth in the 4 racial groups. Conclusion: The use of the corners of the mouth for the selection of artificial teeth is generally inaccurate.

Nasal width as a guide for the selection of maxillary complete denture anterior teeth in four racial groups

Purpose: Selecting artificial teeth for edentulous patients is difficult when pre-extraction records are not available. Various guidelines have been suggested for determining the width of the maxillary anterior denture teeth. This study was undertaken to evaluate the use of the nasal width as a guide for the selection of proper width maxillary anterior denture teeth in four racial groups of the Brazilian population. Materials and Methods: One hundred and sixty subjects (40 Whites, 40 Mulattos, 40 Blacks, and 40 Asians) were selected. Using a sliding caliper, the nasal width and the intercanine distance were measured. The Pearson product-moment correlation coefficient was used to determine the relationship between the above measurements. A prediction was made of the percentage of subjects of the White, Mulatto, Black, and Asian populations in which the selection error due to the clinical application of the method of the nasal width would be within 0 to 2 mm, within 2 to 4 mm, and greater than 4 mm. Results: The four racial groups showed a weak correlation between the intercanine distance and the nasal width. In 39.7% of the White, 55.7% of the Mulatto, 81.9% of the Black, and 48.2% of the Asian populations, errors greater than 4 mm would be present with the use of the nasal width. Conclusions: The correlation found between the intercanine distance and the nasal width was not high enough to be used as a predictive factor. The relationship between natural tooth width and artificial tooth width as predicted by the nasal width showed that the nasal width method is not accurate for all the studied groups. Copyright © 2006 by The American College of Prosthodontists.

Preliminary selection of acerola genotypes in Brazil

Introduction. Breeding studies for acerola (Malpighia glabra) improvement aim at obtaining plants that produce fruits with uniform chemical and physical attributes, including high levels of vitamin C, which can provision the market with fresh fruit and frozen pulp. High variability in fruit quality is observed in Brazilian acerola crops, especially those propagated by seeds. In this context, the objective of our research was to evaluate the physical and chemical characteristics of Brazilian acerola genotype fruits. Materials and methods. Sixteen acerola genotypes were studied in Jaboticabal, São Paulo State, Brazil. A completely randomized design with sixteen treatments and six replications was adopted. Each treatment was represented by one genotype. Several parameters related to fruit quality, such as width, length, weight, pulp percentage, soluble solids (SS), titratable acidity (TA), [SS / TA] ratio and vitamin C content, were evaluated in fruits of the acerola genotypes. The results were submitted to variance analyses, the Tukey test and cluster analysis. Results and discussion. There was a statistical difference between the acerola genotypes studied. Three of them stood out as natural sources of vitamin C. In spite of fruit size, two acerola genotypes were found to have potential for fresh fruit production. In a general form, genotypes that presented a high [SS / TA] ratio had low vitamin C content. Conclusion. The acerola genotypes studied in Jaboticabal presented high variability, forming eleven groups in relation to fruit quality parameters. © 2007 Cirad/EDP Sciences All rights reserved.

Methodology for automatic selection of passes in surface grinding

The main purpose of this work is the development of computational tools in order to assist the on-line automatic detection of burn in the surface grinding process. Most of the parameters currently employed in the burning recognition (DPO, FKS, DPKS, DIFP, among others) do not incorporate routines for automatic selection of the grinding passes, therefore, requiring the user's interference for the choice of the active region. Several methods were employed in the passes extraction; however, those with the best results are presented in this article. Tests carried out in a surface-grinding machine have shown the success of the algorithms developed for pass extraction. Copyright © 2007 by ABCM.

Multivariate approach in the selection of superior soybean progeny which carry the RR gene

Efficiency in the use of genetic variability, whether existing or created, increases when properly explored and analysed. Incorporation of biotechnology into breeding programs has been the general practice. The challenge for the researcher is the constant development of new and improved cultivars. The aim of this experiment was to select progenies with superior characteristics, whether or not carriers of the RR gene, derived from bi-parental crosses in the soybean, with the help of multivariate techniques. The experiment was carried out in a family-type experimental design, including controls, during the agricultural year 2010/2011 and 2011/2012 in Jaboticabal in the Brazilian State of São Paulo. From the F3 generation, phenotypically superior plants were selected, which were evaluated for the following traits: number of days to flowering; number of days to maturity; height of first pod insertion; plant height at maturity; lodging; agronomic value; number of branches; number of pods per plant; 100-seed weight; number of seeds per plant; grain yield per plant. Given the results, it appears possible to select superior progeny by principal component analysis. Cluster analysis using the K-means method links progeny according to the most important characteristics in each group and identifies, by the Ward method and by means of a dendrogram, the structure of similarity and divergence between selected progeny. Both methods are effective in aiding progeny selection.

Characterization and selection of Bacillus thuringiensis isolates effective against Sitophilus oryzae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chromic oxide as a digestibility marker for dogs - A comparison of methods of analysis

The study reported compared coefficients of apparent digestibility (CAD) obtained by total collection (TC) and by chromic oxide (Cr2O3) determined by visible absorption spectrometry (VIS) and flame atomic absorption spectrophotometry (FAAS). These quantification methods were also investigated to assess their precision. Nineteen adult dogs housed in individual digestibility cages were fed three commercial diets, each test including five or seven animals. The experiment was carried out in a completely randomized design with three among-subjects factors (foods) and three within-subject factors (methods), and the dogs were the experimental unit. Estimated CAD for all dietary components in the three diets by either chromium quantification methods did not differ and showed fair agreement with TC results (P > 0.05). Coefficients of chromic oxide recoveries in feces were 1.06 +/- 0.044 and 1.01 +/- 0.045 for VIS and FAAS, respectively, values significantly different (P < 0.05), indicating better recovery for FAAS. Significant differences (P<0.05) were found in the mean concentration of Cr2O3 for diets and feces (17 +/- 0.6 and 19 +/- 0.8g/kg for VIS and FAAS, respectively). Coefficient of variation for FAAS was 1.69% and 1.77% for VIS, which did not differ significantly (P > 0.05). Pearson's correlation coefficient (r=0.99; P < 0.01) indicated positive and significant association among the results for VIS and FASS, indicating reasonable precision and agreement of chromic oxide contents determined by these methods. Therefore, FAAS and VIS can be used successfully to determine Cr2O3 in dog foods and feces. (c) 2006 Elsevier B.V. All rights reserved.

Validation of microsatellite markers for assisted selection of soybean genotypes resistant to powdery mildew

Powdery mildew is one of the most serious diseases of soybean and is found in all producing countries. The purpose of this study was to validate microsatellite markers previously identified as associated with resistance to powdery mildew in soybean. The study was conducted in two F, parent populations with contrasting resistance to powdery mildew, In the analysis 10 SSR primers were used for the populations. and tour polymorphic markers were identified for cross I (MGBR95-20937 x IAC-Foscarin 31) and three for cross 2 (MGBR-46 x Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48). The Chi-square analysis of the phenotypic evaluation confirmed the expected segregation (3: 1) of a dominant gene related to resistance. The polymorphic markers also segregated as expected (1:2:1). The markers Sat 366 and Sat 393 in the crosses 1 and 2. respectively, located at 9.41 and 12.45 cM from the gene. were considered promising for marker-assisted selection for resistance to powdery mildew in soybean. at a selection efficiency of 92.7% and 60.3% respectively.

Selection of surfactant compounds to enhance the dispersion of Beauveria bassiana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Physical resistance as a criterion in the selection of foraging material by Acromyrmex subterraneus brunneus Forel, 1911 (Hym., Formicidae)

Leaf-cutting ants forage on a wide variety of plant species using the physical and chemical characteristics of the plants as a selection criterion. In order to determine the influence of the physical factor on the selection of foraging material, inert materials such as floral sponge, polystyrene, plastic and clay, which possess different degrees of physical resistance to cutting, were offered simultaneously to five Acromyrmex subterraneus brunneus colonies, and assessed 12 and 24 h after foraging. No substrate selectivity was observed during foraging. Physical resistance was used as a decision criterion for the incorporation or return of the foraged material. This fact suggests the existence of a second time of selection of the foraged material inside the colony during cultivation of the symbiontic fungus.

Selection of fungi for accelerated decay in stumps of Eucalyptus spp.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Selection of X chromosome of buffaloes sperm with Percoll gradients

The aim of the present study was to evaluate the selection of X chromosome of buffaloes sperm with Percoll gradients. The stock solution of Percoll was prepared in the proportion of 1:11 (1 part of Percoll:11 parts of a solution containing KCl 1M, NaH(2)PO(4) 0.1M, NaCl 1.5M and sodium HEPES 23.8 g/ml). In order to prepare 9 different gradients were added to the stocked Percoll the A solution (glicine-yolk extender) in the following proportions: 90, 80, 72, 65, 57, 49, 34 and 25%. A sample of 0.7 ml of the fresh semen was deposited at 2 ml of Percoll 80% for the sperm wash. The precipitate was put in tube with 0.7 ml of each gradient. Then, the precipitated was washed in TES solution by centrifugation (500xg for 10 minutes), and collected again and diluted in TES solution to be freeze. The presence of the F body in the spermatozoa was observed in 58.7 +/- 5.4% of the control group and in 41.2 +/- 5.4% of the treated group (p<0.01). This result showed an increment of 17.55 of male sperm in the Percoll's group. The reduction of the centrifugation force did not improve the percentage of X sperm.

Comparison of Methods for Evaluating Mineral Loss: Hardness versus Synchrotron Microcomputed Tomography

This study analyzed degrees of demineralization in bovine enamel using synchrotron microcomputed tomography (SMCT) and hardness measurements (Knoop hardness number, KHN). For 5 days, 40 bovine enamel blocks were individually subjected to a pH cycling model and treatment with fluoride dentifrices (placebo, 275, 550 and 1,100 mu g F/g) diluted in deionized water twice a day. Surface hardness number and cross-sectional profiles of hardness and mineral concentration (by SMCT) were determined. Integrated hardness (KHN x mu m) for sound and demineralized specimens was calculated and subtracted to give the integrated loss of hardness (Delta KHN) for the lesions. Increasing fluoride concentration in the dentifrices led to higher values for surface hardness after pH cycling and mineral concentration (g(HAp) cm(-3)), and lower values for Delta KHN (p < 0.05). From the present results, it may be concluded that hardness measurements revealed demineralization in all groups, which was lower in groups treated with dentifrice with a higher F concentration. SMCT and hardness measurements gave similar results in areas with higher demineralization, but diverged in areas with lower demineralization. Copyright (C) 2009 S. Karger AG, Basel