Interpretation of Resistivity Piezocone Tests in a Contaminated Municipal Solid Waste Disposal Site

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistivity piezocone for geo-environmental site characterization: Two case histories from Brazil

This paper presents two case histories from Brazil where geophysical and resistivity piezocone tests were carried out to detect contamination. At the first one, the site investigation program was carried out to detect salt-water intrusions in a superficial sedimentary aquifer, at the Paranaguá harbor, in Paraná State. The second case history is a sanitary landfill from Bauru City, São Paulo State. In both sites, superficial geophysical tests were interpreted to detect and delineate the shape of contamination plume, helping to locate the resistivity piezocone tests. It was found that the interpretation of resistivity piezocone tests is straightforward to assess salt-water intrusion in sedimentary sands. For tropical soils, this technique presented some limitations since the groundwater table sometimes is deeper than the layer penetratable to the cone. Moreover, the genesis of those soils affects soil behavior and soil and water sampling is required to support interpretation.

Antimicrobial resistance of heterotrophic marine bacteria isolated from seawater and sands of recreational beaches with different organic pollution levels in southeastern Brazil: evidences of resistance dissemination

Antimicrobial resistance of marine heterotrophic bacteria to different antimicrobials agents were evaluated in seawater, dry and wet sands from three marine recreational beaches with different pollution levels. In all studied beaches, the greatest frequencies of resistance were found in relation to penicillin. on Gonzaguinha, the most polluted beach, 72.3% of all isolated strains showed simple resistance, whilst 8.33% had multiple resistance. The values found on Ilha Porchat beach, were 70.8% and 6.9% for simple and multiple resistances, respectively. on GuaraA(0), the less polluted beach, only 35.3% of isolated strains had simple resistance. Multiple resistance was not observed. While samples from Gonzaguinha and Ilha Porchat beach showed isolated strains resistant to seven and six different antimicrobial agents, respectively, samples from GuaraA(0) beach were resistant only to penicillin and erytromicin. The positive correlations obtained between the degree of seawater contamination and frequency and variability of bacterial resistance indicate that polluted marine recreational waters and sands are sources of resistant bacteria contributing thus, to the dissemination of bacterial resistance.

Antimicrobial resistance and species composition of Enterococcus spp. isolated from waters and sands of marine recreational beaches in Southeastern Brazil

Density, species composition and antimicrobial resistance in bacteria of the Enterococcus genus were evaluated in seawater and sands from 2 marine recreational beaches with different levels of pollution. The 2 beaches showed predominance of Enterococcus faecalis and Enterococcus faecium, in the water and the sand. Dry sand presented higher densities of Enterococcus sp. and higher frequency of resistant strains than wet sand and seawater. The beach with a higher degree of pollution presented higher percentages of resistant strains (66.7% and 61.5%, in sand and in water, respectively) and resistance to a larger number of antimicrobials compared with the less polluted beach, Ilha Porchat (35.7% and 31.25% of resistant strains in sand and water, respectively). in water samples, the highest frequencies of resistance were obtained against streptomycin (38.5%) and erythromycin (25%), whilst in sand, the highest frequencies were observed in relation to erythromycin and tetracycline (38.1% and 14.3%, respectively). These results show that water and sands from beaches with high indexes of faecal contamination of human origin may be potential sources of contamination by pathogens and contribute to the dissemination of bacterial resistance. (C) 2007 Elsevier Ltd. All rights reserved.

Natural radionuclides in major aquifer systems of the Parana sedimentary basin, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A comparative study of aquifer systems occurring at the Parana sedimentary basin, Brazil: major hydrochemical trends

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of tectonic-controlled fluvial morphology and sedimentary processes of the western Amazon Basin: an approach using satellite images and digital elevation model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Addition of sedimentary rock to kaolinitic clays: influence on sintering process

Foram avaliadas, durante o processo de sinterização, as propriedades mecânicas de peças cerâmicas a base de argila com adição de rocha sedimentar. Foram preparados corpos de prova com 0, 20, 40, 60 e 80% em peso de rocha adicionada ao material argiloso. As peças foram sinterizadas nas temperaturas de 500, 800, 900, 1000, 1100 e 1200 °C e, posteriormente, submetidas à análise de difração de raios X e a ensaios tecnológicos Os resultados de difração de raios X mostram que a rocha sedimentar apresenta argilominerais micáceos enquanto o material argiloso possui a caulinita como fase principal. Técnicas de análises térmicas e difração de raios X das diferentes misturas mostram reações que indicam transformação (inversão do quartzo), decomposição (perda de hidróxidos) e formação de fase (mulita) durante o aquecimento das amostras. Os ensaios tecnológicos mostram que a adição da rocha sedimentar melhora algumas propriedades do material sinterizado, auxiliada pela presença de fundentes. Entretanto, a presença de quartzo na rocha dificulta a formação da fase mulita. A formação de novas fases e as transformações ocorridas no aquecimento e resfriamento das amostras ajuda explicar as propriedades tecnológicas dos materiais cerâmicos.

Weathering rates and anthropogenic influences in a sedimentary basin, São Paulo State, Brazil

The weathering rate of rocks and chemical dynamics of the Corumbatai River basin, São Paulo State, Brazil, were evaluated using major elements as natural tracers. This basin has serious environmental problems in terms of quality of surface and rainwater, which affect the determination of weathering rate. The Corumbatai River, downstream from Rio Claro City, receives several elements/compounds through anthropogenic activities, with only K, SO42- and alkalinity yielding positive flux values. The negative flux of some anions/cations can be attributed to atmospheric loading mainly related to anthropogenic inputs, providing K a value of 16.7 ton/km(-2)a(-1) for the material removed by weathering in the Corumbatai River basin. This is equivalent to 26 x 10(6) kg of rock being removed each year by the Corumbatai River. The instantaneous flux was found to be a function of discharge, with the majority of dry residue (dissolved load) being transported during the summer (wet) months. The removed material in Corumbatai River basin derives mainly from two sub-basins (Cabegas River and Passa Cinco River), where the sandstones weather more easily than siltstones and claystones in the basin. (C) 2003 Elsevier Ltd. All rights reserved.

The use of apatite fission track thermochronology to constrain fault movements and sedimentary basin evolution in northeastern Brazil

An apatite fission track study of crystalline rocks underlying sedimentary basins in northeastern Brazil indicate that crustal blocks that occur on opposite sides of a geological fault experienced different thermal histories. Samples collected on the West block yielded corrected fission-track ages from 140 to 375 Ma, whereas samples collected on the East block yielded ages between 90 and 125 Ma. The thermal models suggest that each block experienced two cooling events separated by a heating event at different times. We concluded that the West block moved downward relative to the East block ca. 140 Ma ago, when sediments eroded from the East side were deposited on the West side. This process represents the early stage of sedimentary basin formation and the opening of the South Atlantic Ocean in the region. Downward and upward movements related to heating and cooling events of these crustal blocks at different periods until recent times are proposed. (c) 2005 Elsevier Ltd. All rights reserved.

Paraná Basin: Mineral resource potentials in Brazil, Uruguay, and Paraguay

The Paraná Basin is a Western Gondwanan cratonic basin that is better defined as the Paraná depositional site, since it has a diverse history as a basin. Sedimentation started in the Ordovician-Silurian, followed by extensive marine Devonian deposition. A Late Paleozoic/ Triassic facies cycle wedge was clearly built during Pangean time. The Early Cretaceous was characterized by extensive basaltic lava flows immediately before the break-up of Pangea. Following these rifting and drifting processes, the basin's structural framework was totally rebuilt, generating new depositional sites in the Late Cretaceous to Tertiary. Based on more recent data, at least two different basins may be defined during the evolution of what was once considered a unique basin. Nevertheless, even if considered as a single basin, the sedimentary pile of the Paraná Basin has considerable economic potential, until now exploited only rudimentarily, except for its groundwater resources. Aggregates, limestones, clays, industrial sands, gems, dimension stones, hydrocarbons, coal, peat, and uranium are some of the potential mineral resources of this basin. Copyright © 1997 by V. H. Winston & Son, Inc. All rights reserved.