Influência da Qualidade das Lâminas no Desempenho Mecânico à Flexão de Painéis Compensados de Hevea brasiliensis

After concluding the main phase of commercial exploration of latex (about 30 years ago), rubber wood plantations can be utilized as an alternative source of wood for sawmills and other wood based products with more aggregate value; tendency already confirmed in countries of southeastern Asia. The main purpose of this research was to evaluate the influence of dynamic modulus of elasticity veneers on the mechanical performance in the bending of plywood made from Hevea brasiliensis. For this study, rubber tree veneers were sorted in three classes of dynamic modulus of elasticity: low (from 4887-7323 MPa), medium (from 8200-8948 MPa) and high (from 10979-13010 MPa). Panels were produced according to five treatments with different veneer classes and arrangements. Results showed significant effect of the treatments in the mechanical performance in the bending of panels. Panels with better mechanical performance were produced exclusively with medium and high dynamic modulus of elasticity. Panels made with low modulus of elasticity veneers presented lower mechanical performance even when combined with high modulus of elasticity veneers.

Caracterização química e energética de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucaliptus grandis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de uma base de dados de imagens digitais de madeira serrada de coníferas

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Diagnóstico da cadeia produtiva de rochas ornamentais e de revestimento do Estado do Ceará: mineração, serrarias, marmorarias e desafios do setor

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Rendimento operacional de uma serraria com a espécie Cambará (Qualea albiflora Warm.) na região Amazônica

Pós-graduação em Ciência Florestal - FCA

Avaliação energética e ambiental de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucalyptus grandis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistema fuzzy de suporte a decisão para aplicação de programa de eficiência energética em serrarias

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Proposta de otimização para reflorestamento de eucalipto utilizando multiprodutos

Pós-graduação em Ciência Florestal - FCA

Particleboard produced with sawmill waste of different wood species

This study aimed to investigate physical performance of particleboards produced with waste from sawmills, containing different wood species, and two adhesives: urea-formaldehyde (UF) based resin and castor-oil (PU) based bi-component polyurethane resin. Panels were produced with nominal density 0.8gcm(-3); pressing temperature 110 degrees C; pressing time 10 min; specific pressure 5 MPa. Water absorption (2 and 24h); thickness swelling (2 and 24h); density; and moisture content were investigated. Results confirmed that the produced panels presented compatible physical properties in comparison with other researches referred in literature, proving the feasibility of inputs employed. Panels produced PU showed better performance than those produced with UF.

Influência de software de otimização de corte no rendimento de serraria da região sudoeste paulista

This study aimed to analyze the increase of yield provided by a software optimization cutting in a pine sawmill, located at southwest region of São Paulo, city of Itapeva. First were measured 10 logs that were processed by conventional sawing system by measuring the volume of products in the process output. Then using a cutting optimization software, that generated cuts diagrams, 10 logs, from 25 to 26 cm diametrical class, were processed by sawing system optimized. For the conventional sawing, the value found to yield was 41.80%, whereas for the unfolding optimized showed the value of 61.79%, resulting in a difference of 19.99%. This study shows that there is room for significant improvement of performance in sawmills sawing with the use of optimization software as the employee at work

Análise do consumo de energia elétrica e da eficiência energética em uma indústria de processamento de madeira

In the industries of wood processing (sawmills), where timber is sawn in equipment such as band saws, circular saws, trowel, thicknessers, among others, that mechanically transform this resource and use of electric motors, which are not unusually poorly scaled working or overloaded, often a factor that is not found in these industries and has fundamental importance in the production process is energy efficiency that is achieved by both technological innovation and through all the practices and policies that aim to lower energy consumption, lowering energy costs and increasing the amount of energy offered no change in generation. For both during the design of an electrical installation, both overall and in various sectors of the installation, investigations are necessary, considerations and uses of variables and factors that put into practice the theme of energy efficiency. Therefore, in this paper, these factors were calculated and analyzed for a wood processing industry (sawmill) in the municipality of Taquarivaí - SP, namely: active power, power factor, demand factor and load factor. Where they were small in relation to the literature, these events that occur when devices are connected at the same time and due to the conditions of processing the wood, where the engines have large variations in electricity consumption during the unfolding of the same, due to efforts with the load and idle moments between each machining operation in the equipment

Análise da eficiência energética em indústrias madeireiras através da lógica fuzzy

This paper presents the application of fuzzy theory to support the decision of implementing energy efficiency program in sawmills operating in the processing of Pinustaeda and Pinuselliotii. The justification of using a system based on fuzzy theory for analysis of consumption and the specific factors involved, such is the diversity of rates / factors. With the fuzzy theory, we can build a reliable system for verifying actual energy efficiency. The indices and factors characteristic of industrial activity were measured and used as the basis for the fuzzy system. We developed a management system and technology. The system involves the management practices in energy efficiency, maintenance of plant and equipment and the presence of qualified staff. The technological system involves the power factor, load factor, the factor of demand and the specific consumption. The first response provides the possibility of increased energy efficiency and the second level of energy efficiency in the industry studied. With this tool, programs can be developed for energy conservation and energy efficiency in the industrial timber with wide application in this area that is as diverse as production processes. The same systems developed can be used in other industrial activities, provided they are used indices and characteristic features of the sectors involved.

Comportamento do fator de potência de uma serra de fita vertical e de um picador em uma serraria

This work aims to present the electrical behavior of two mechanical processing equipment of wood, the saw vertical tape and the wood chipper. Their characteristics in real operating conditions and the electrical behavior of devices in terms of energy efficiency is shown through the study of individual power factor are presented in this study. It was observed that both devices operate unloaded for some intervals of time and this contributes to a low power factor. It is concluded that improved production planning and better preparation of the operators in the operations of sawing wood, in order to improve the power factor in sawmills is necessary.