Growth of the mangrove crab Ucides cordatus (Brachyura, Ocypodidae)

During monthly samplings between September 1998 and August 2000. 3,660 specimens of Ucides cordatus (Linnaeus, 1763) (2054 males and 1606 females) were obtained and examined for size (CW carapace width) to determine growth-age equations for each sex. This species showed a slower growth, with a marked seasonal oscillation, in females as compared to males, suggesting application of the seasonal and nonseasonal von Bertalanffy growth model, respectively. CW∝ and k constant were closely similar for the two sexes (CW∝ (male) = 90.3 mm: CW∝ (female) = 88.6 mm; k(male) = 0.28; k(female) = 0.26). The age at sexual maturity was estimated to be around 3 years, while the age at legal size (CW = 60 mm) was 3.8 and 4.7 years for males and females, respectively. In the laboratory, juvenile stages did not show differences in growth rates under the same temperature and photoperiod conditions.

SEDIMENT BIOTURBATION POTENTIAL of UCA RAPAX and UCA URUGUAYENSIS AS A RESULT of THEIR FEEDING ACTIVITY

Bioturbation of mangrove sediments by Uca uruguayensis (Nobili, 1901) and U. rapax (Smith, 1870) was compared based on the grain-size composition and organic content in surface sediment around the burrow and feeding pellets in two mangrove zones of the Sao Vicente Estuary, state of São Paulo, Brazil. For each species, 25 burrows with active crabs were selected. All pellets within a 15-cm radius of each burrow were carefully collected; samples of substrate were taken; and the crab occupant was excavated, sexed, and measured for carapace width (CW). The number of spoon-tipped setae on the second maxilliped of each species was estimated; U. uruguayensis showed more of these setae than U. rapax. For both species, the sediment post-processed by feeding activity (feeding pellets) showed a similar increase of coarser fractions and a smaller organic content. However. U. uruguayensis was more efficient in removing organic matter (88.1%) from the sediment than U. rapax (37.5%). These results suggest that different numbers of spoon-tipped setae on the second maxillipeds of the fiddler crabs do not affect the potential for grain-size selection, but result in differing abilities to remove organic matter from the sediment.

Embryology of the mangrove crab Ucides cordatus (Brachyura : Ocypodidae)

Ovigerous females of Ucides cordatus were collected at different mangrove areas in Iguape, SP, Brazil, and reared in the laboratory in order to describe each embryonic stage. Accounts of the biometry, internal morphology, and coloration of the eggs were taken. The embryonic development took 19 +/- 1d (27degreesC, 12:12 h) with eight well-defined stages. A salinity test on embryonic development was conducted, and a better result was obtained in a rearing at 15parts per thousand. Eggs are slightly ellipsoid through development and undergo an increase of 13.9% in diameter to 91.7% in volume. Cluster analysis revealed three different groups for diameter (Stages I-II, III-VI, and VII-VIII) and volume (Stages I-III, IV-V, and VI-VIII), supporting the classification of embryos into initial, intermediate, and final stages, which are currently used in studies on the reproductive biology of decapod crustaceans. In this species, the identification of the different embryonic stages can be achieved only if biometric data are combined with information on the internal morphology of embryos and coloration of the eggs.

Digital monitoring of mycelium growth kinetics and vigor of shiitake (Lentinula edodes (Berk.) Pegler) on agar medium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biocompatibility of a resin-modified glass-ionomer cement applied as pulp capping in human teeth

Purpose: to evaluate the human pulp response following pulp capping with calcium hydroxide (CI-I, Group 1), and the resin-modified glass-ionomer Vitrebond (VIT, Group 2). Materials and Methods: Intact teeth with no cavity preparation were used as control Group (ICG, Group 3). Buccal Class V cavities were prepared in 34 sound human premolars. After exposing the pulps, the pulp capping materials were applied and the cavities were Filled using Clearfil Liner Bond 2 bonding agent and Z100 resin-based composite. The teeth were extracted after 5, 30, and from 120 to 300 days, fixed in 10% buffered formalin solution, and prepared according to routine histological techniques. 6-mu m sections were stained with hematoxylin and eosin, Masson's trichrome, or Brown gr Brenn technique for bacterial observation. Results: At 5 days, CH caused a large zone of coagulation necrosis, the mononuclear inflammatory reaction underneath the necrotic zone was slight to moderate. VIT caused a moderate to intense inflammatory pulp response with a large necrotic zone. A number of congested venules associated with plasma extravasation and neutrophilic infiltration was observed. Over time, only CH allowed pulp repair and complete dentin bridging around the pulp exposure site. VIT components displaced into the pulp tissue triggered a persistent inflammatory reaction which appeared to be associated with a lack of dentin bridge formation. After 30 days a few histological sections showed a number of bacteria on the lateral dentin walls. In these samples the pulp response was similar to those samples with no microleakage. VIT was more irritating to pulp tissue than CH, which allowed pulp repair associated with dentin bridge formation. These results suggested that VIT is not an appropriate dental material to be used in direct pulp capping for mechanically exposed human pulps.

Human pulpal response to direct pulp capping with an adhesive system

Purpose: To evaluate clinically and microscopically the human pulp response when directly capped with an adhesive system or calcium hydroxide over short (9-12 days) and long (53-204 days) experimental periods. Materials and Methods: Fifty-one sound human premolars scheduled for orthodontic extraction, had their pulp horns gently exposed with a diamond point. Debris in the pulp wound was washed out with a sterile saline solution. The pulps were then capped with either an adhesive system (Scotchbond Multi-Purpose Plus) or calcium hydroxide. All teeth were subsequently restored with resin-based composite (Z-100) according to the manufacturer's instructions. After the experimental periods, the teeth were extracted and processed for light microscopic examination. Results: Short-term: the pulp tissue capped with SBMP-P exhibited dilated and congested blood vessels associated with a mo;derate inflammatory response and blanching of pulp cell nuclei. Long-term: no evidence of healing and bridge formation was observed. A persistent mild inflammatory pulp response was present. Micro-abscesses were detected in three cases associated with bacterial infiltration. Calcium hydroxide stimulated early pulp repair and dentin bridging which extended into the longest period.

Composite surfaces after finishing and polishing techniques

Purpose: To evaluate the effect of finishing and polishing techniques on surface roughness of resin-based composites (RBCs). Materials and Methods: Forty specimens of each material were cured under Mylar strips and immersed in artificial saliva for 1 wk. Samples were tested with a profilometer to obtain baseline average surface roughness (Ra). Specimens of both RBCs were then finished and polished according to four techniques: (1) Sof-Lex disks; (2) Sof-Lex disks followed by Prisma Gloss; (3) Enhance points; (4) Enhance points followed by Prisma Gloss application. New readings of the roughness pattern were carried out and the difference of post-polishing and baseline values were analyzed. Results: ANOVA test (alpha= 0.05) did not show differences between materials (P= 0.9393) nor interaction effects (P= 0.3094), but significant difference among the finishing/polishing techniques were detected (P= 0.0157). Tukey's test showed that the smoothest surface was obtained when the specimens were treated by Sof-Lex followed by Prosma Gloss polishing paste; and the worst results were obtained after using Enhance points alone.

Ability of Gutta-Percha and Resilon to Fill Simulated Lateral Canals by Using the Obtura II System

Introduction: The aim of this study was to evaluate the ability of Resilon (Resilon Research, LLC, North Branford, CT) and 2 types of gutta-percha to fill simulated lateral canals when using the Obtura II system (Model 823-700; Obtura Spartan, Fenton, MO). Methods: Forty-five human single-rooted teeth were selected and subjected to root canal preparation. After that, simulated lateral canals were made at 2, 5, and 8 mm from the working length (WL). The specimens were divided into 3 groups (n = 15) according to the filling material used: Obtura Flow 150 gutta-percha (Obtura flow), Odous Endo Flow gutta-percha (Odous; Odous de Deus Ind e Corn. Ltda Belo Horizonte, MG, Brazil), and Resilon pellets (Resilon). Root canals were filled using the Obtura II system with the tip inserted to 3 mm from the WL. No sealer was used for root canal obturation. Specimens were subjected to a tooth decalcification and clearing method, and filling of the lateral canals was analyzed by digital radiography and photographs. The measurement of lateral canal filling was done using Image Tool software (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX). Data were statistically analyzed with the Kruskal-Wallis test at 5% significance. Results: All materials showed an ability to penetrate into the simulated lateral canals, with a minimum percentage of 73% in all thirds of the root canal. Conclusions: It was concluded that gutta-percha and Resilon are solid core materials with a lateral canal filling ability when used with the Obtura II system. (J Endod 2012;38:676-679)

MORPHOLOGICAL EVIDENCE FOR PROTANDRIC SIMULTANEOUS HERMAPHRODITISM IN THE CARIDEAN EXHIPPOLYSMATA OPLOPHOROIDES

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Population biology of the freshwater anomuran Aegla longirostri (Aeglidae) from South Brazilian streams

This paper describes a population of Aegla longirostri from Ibicui-Mirim River, Itaara, Rio Grande do Sul State, Brazil, evaluating the size at onset of sexual maturity, relative growth, mean size, size-frequency distribution, sex ratio, ovigerous-rate, and recruitment. Samples were collected monthly from September 1996 to August 1997. Sex, carapace length (CL), cheliped length (ChL), abdomen width (AW), and front width (FW) were recorded for each crab. A total of 586 specimens were collected (277 males, 244 females, and 65 unsexed juveniles). The smallest specimen was 1.5 mm CL and the largest male was 23.8 mm CL. The relative growth analysis and the Mature software showed that the size at onset of sexual maturity was 13.7 mm CL in males and 10.7 mm CL in females. Females were smaller than males and were more abundant in adult classes, whereas males were more representative in juvenile classes. The sex ratio did not differ from 1:1 throughout the collecting period. Recruitment was observed throughout the entire sampling period, but it was higher in the winter months (from June to August). However, ovigerous females were present in spring and summer (from January to April). This population seemed to be at equilibrium during the study period. Recently, this area has been changed because of the construction of a reservoir, and a new study is required to evaluate the present condition of this population of A. longirostri.

Postlarval stages and growth patterns of the spider crab Pyromaia tuberculata (Brachyura, Majidae) from laboratory-reared material

The spider crab Pyromaia tuberculata was introduced into southeastern Brazil; ovigerous material was collected and reared in the laboratory. Morphologic changes and growth patterns of post-larval development are reported. Results show that within-stage size variation is lowest in mature stages, especially in the case of females in which there is an apparent size threshold for the last juvenile stages to undergo the puberty molt. A prepuberty molt taking place at the fourth crab stage is indicated by analyzing the allometric growth of the abdomen in females. In contrast, the same procedure using the allometric growth of chelae failed in detecting both the prepuberty and puberty molts in males. Conversely to females, which develop a complex brood chamber at the puberty molt, the enlargement of chelae was not consistent in all postpuberty males. The short instar sequence of this species, in no case exceeding nine stages, is marked by conspicuous morphologic alterations achieved at each molt. Almost all stages can be identified by examining diagnostic features of rostrum, abdomen, sternum, and pleopods.

Population structure and reproductive period of the tropical hermit crab Calcinus tibicen (Decapoda : Diogenidae) in the region of Ubatuba, São Paulo, Brazil

The population of the hermit crab Calcinus tibicen in the Ubatuba region was studied with emphasis on seasonal abundance, seasonal size-frequency distribution, sex-ratio, and reproductive period based on the percentage of ovigerous females. The animals were collected at 2-month intervals for 2 consecutive years (from January 1993 to November 1994). Total mean animal size in shield length was 5.14 +/- 1.23 mm for males, 4.23 +/- 0.79 mm for females, and 4.53 +/- 0.60 for ovigerous females. A discontinuity in reproduction was observed, with an absence of ovigerous females in July (winter) and a high incidence from September to May (spring to autumn). Calcinus tibicen is sexually dimorphic in relation to size, with a higher growth rare in males. The sex-ratio pattern changes with season, indicating that it is more a function of season or habitat than of size.

Latitudinal variation in population structure and reproductive pattern of the endemic south american shrimp Artemesia longinaris (Decapoda : Penaeoidea)

Population Structure and reproductive Maturity of females were investigated in the shrimp Artemesia longinaris Bate, 1888 from coastal waters of northern São Paulo State (Brazil. 23 degrees S) and Mar del Plata (Argentina, 38 degrees S) from June 2001 to May 2002. Monthly collections were taken by, commercial shrimp fishing boats equipped with bottom trawl nets. Population parameters from size frequency distributions and size (carapace length = CL) of female reproductive maturity were analyzed and compared front the two sampling areas. Latitudinal trends in reproductive parameters of A. longinaris were shown in overall body size and size of reproductive maturity, both of which were smaller in females from the tropical location than those front the cold-temperate sampling area. Largest females (> 30 turn CL) were collected in Argentina, while Brazilian specimens reached maximum size at 27 nun CL. The smallest Size of female sexual maturity was estimated at 13.6 nun CL in Brazilian samples compared to 22.1 mm CL calculated for those from Argentina. Populations from both regions exhibited a bimodal size distribution in the spring, with the peak at small body size probably corresponding to recent recruits and the peak at larger body, size to reproductive females or shrimps migrating in from deeper waters or other latitudinal regions. In late spring and summer. an intrusion of the cold South Atlantic Coastal Water mass was observed which lowered water temperature and stimulated plankton production. The primary food source for the larvae of a typically cold-temperate species such as A. longinaris. The trend of increasing body size and delay of sexual maturity with increasing latitude appears to be correlated with the decreasing water temperature and increasing plankton productivity at higher latitudes.

Reproductive cycle and recruitment period of Ocypode quadrata (Decapoda, Ocypodidae) at a sandy beach in southeastern Brazil

The reproductive cycle and recruitment period of a ghost crab population from Ubatuba, São Paulo, Brazil were investigated by means of examining the developmental stages of gonads of breeding crabs and the ingress of young recruits to the studied population. Monthly collections over a one-year period were carried out during nocturnal low-tide periods at Vermelha beach. The morphology of the abdomen and pleopods was used for sex determination. All captured crabs were measured for carapace width and dissected for the determination of the development stage of the gonads. A total of 582 specimens was captured: 271 males, 241 females, and 70 juveniles. Size ranged from 8.5 to 37.5 mm for males, from 9.5 to 39.2 mm for females, and from 5.8 to 12 mm for early juveniles. Median size of males and females did not differ statistically. The frequency of ovigerous females was markedly low. The onset of sexual maturity in females is achieved at around 23 mm of carapace width. Mature females with advanced gonad stages were not recorded from May to September. Recruitment of young was highest during summer, but the presence of early and late juvenile specimens throughout the year indicates that continuous recruitment is taking place in the studied population.

Spatial and seasonal distributions of Callinectes danae (Decapoda, Portunidae) in Ubatuba Bay, São Paulo, Brazil

The spatial and seasonal distributions of Callinectes danae Smith, 1869, in Ubatuba Bay, São Paulo, Brazil, were investigated as a part of a broad study on the general biology of portunids along the northern coast of São Paulo State, Brazil. Swimming crabs were collected during one year, from September 1995 to August 1996, along eight transects determined according to local physiographic features. Three replicate trawls were performed monthly at each transect. Depth. salinity, dissolved oxygen, temperature, organic matter content, and texture of the sediment were measured. Callinectes danae individuals were concentrated in shallow water close to the discharge of estuaries where the bottom is composed of fine and very fine sand. The species was more abundant in the warmer months. During the study period, C. danae exhibited continuous reproduction with a peak of reproductive intensity in June. Within this area, some sites are particularly favorable for C. danae establishment due to a combination of factors and prevailing local conditions.