64 resultados para STABLE ISOMORPHISM
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
We review the scaling properties of few-body observables near the critical conditions for binding, with particular attention to light exotic nuclei, molecules and ultracold atoms.
Resumo:
This study examined variations in the Fulton condition factor, chemical composition, and stable isotopes of carbon and nitrogen in the Brazilian freshwater fish cachara (Pseudoplatystoma fasciatum), comparing farmed and wild fish in different seasons. Values for energy, protein, moisture, and Fulton's condition factor were higher for farmed than for wild fish in the rainy season, indicating better nutritional quality; however, these differences were not observed in the dry season. Likewise, we found significant enhancement of delta(15)N in farmed fish in the rainy season but not in the dry season, whereas enhancement of delta(13)C was observed in both seasons. The combined measurement of delta(13)C and delta(15)N provided traceability under all conditions. Our findings show that stable isotope analysis of C and N can be used to trace cachara origin, and that seasonal variations need to be considered when applying chemical and isotopic authentication of fish and fish products. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Bovine meat and bone meal (MBM) was widely used in animal diets until outbreaks of Bovine Spongiform Encefalopathy (BSE) occurred in some countries. It has not been confirmed yet whether or not BSE may be transmitted to man through chicken meat originated from poultry that had been fed diets containing MBM. Therefore, consumers nowadays express preference for meat originated from birds fed exclusively vegetable diets. This study analyzed samples of major breast muscle (Pectoralis major) using mass spectrometry of stable isotopes (carbon and nitrogen) as a means to assess the presence of MBM in broiler diets, a technique that might be used in the certification of poultry quality. A total of 150 day-old chicks were reared in five randomized treatments with increasing MBM dietary inclusion levels (0, 1, 2, 4 and 8%). on day 42, breast muscle samples were collected from three birds per treatment and used in the determination of 13C/12C and 15N/14N isotope ratios. The breast muscle isotope values were expressed as delta in parts per thousand (delta ). The following carbon isotope values (13C) were found: 18.74 ±0.11, 18.51 ±0.19, 18.24 ±0.10, -17.79 ±0.12, and -17.15 ±0.15 for 0, 1, 2, 4 and 8% MBM dietary levels, respectively. Nitrogen isotope values (15N) were 1.65 ±0.14, 1.65 ±0.28, 1.72 ±0.08, 1.95 ±0.16, and 2.52 ± 0.09 for 0, 1, 2, 4 and 8% MBM dietary levels, respectively. This study showed important differences in delta13C and delta15N values in breast meat, evidencing a simultaneous enrichment of this isotopic pair, which allowed tracing MBM in bird diets. Analysis of carbon and nitrogen stable isotopes may be used to ensure feeding with exclusively vegetable diets, and might also be used as a reliable evaluation tool in broiler meat certification. The diet with 1% inclusion level of MBM and the exclusively vegetable diet showed similar results.
Resumo:
Consistent information on meat products consumed by the public is essential. The technique of stable isotopes is a powerful tool to recover consumers' confidence, as it allows the detection of animal byproduct residues in poultry meat, particularly in quail meat. This study aimed at checking the presence of poultry byproduct mixtures in quail diets by applying the technique of carbon (13C/12C) and nitrogen (15N/14N) stable isotopes in quail breast muscle, keel, and tibia. Sixty four one-day-old male quails were obtained from a commercial farm. Birds were housed in an experimental house from one to 42 days of age, and were randomly distributed into 8 experimental treatments, and fed diets containing poultry offal meal (POM), bovine meat and bone meal (MBM) or poultry feather meal (PFM), or their mixtures. Four birds per treatment were slaughtered at 42 days of age, and breast (Pectoralis major), keel, and tibia were collected for analyses. The inclusion of animal byproducts in quail diets was detected by 13C e 15N analyses in the tissues of the birds; however, it was not possible to specify which byproducts were used. It was concluded that quail meat can be certified by the technique of stable isotopes.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This study proposed the use of the stable isotope technique to track the type of food utilized by pacu Piaractus mesopotamicus larvae during their development, and to identify the moment when the larvae start using nutrients from the dry diet by retaining its carbon and nitrogen atoms in their body tissues. Five-day-old pacu larvae at the onset of exogenous feeding were fed Artemia nauplii or formulated diet exclusively; nauplii+formulated diet during the entire period; or were weaned from nauplii to a dry diet after 3, 6 or 12 days after the first feeding. delta(13)C and delta(15)N values for Artemia nauplii were -15.1 parts per thousand and 4.7 parts per thousand, respectively, and -25.0 parts per thousand and 7.4 parts per thousand for the dry diet. The initial isotopic composition of the larval tissue was -20.2 parts per thousand and 9.5 parts per thousand for delta(13)C and delta(15)N respectively. Later, at the end of a 42-day feeding period, larvae fed Artemia nauplii alone reached values of -12.7 parts per thousand and 7.0 parts per thousand for delta(13)C and delta(15)N respectively. Larvae that received the formulated diet alone showed values of -22.7 parts per thousand for delta(13)C and 9.6 parts per thousand for delta(15)N. The stable isotope technique was precise, and the time at which the larvae utilized Artemia nauplii, and later dry diet as a food source could be clearly defined.
Resumo:
The objective of the present study was to trace the inclusion of poultry offal meal (POM) in the diet of meat-type quails reared for a long period using the technique of stable isotopes. A number of 320 quails were randomly distributed into eight treatments: vegetable diet (T1), and a diet containing 8% POM were fed until the end of the experimental period (T2) or replaced by the vegetable diet on day 42 (T3), 56 (T4), 70 (T5), 84 (T6), 98 (T7), and 112 (T8). Breast muscle samples were collected from four birds randomly selected per treatment every 14 days. The obtained isotope results were submitted to multivariate analysis of variance (MANOVA) with the aid of the GLM procedure of statistical SAS program. Treatments were different from T1 when birds were sacrificed at least two weeks after the diet was changed. T2 results were different from T1 in all evaluated periods. It was concluded that it is possible to trace poultry offal meal inclusion in a strictly vegetable diet after the diet was changed for at least 14 days.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Among the osteotomies performed in orthognathic surgery, the sagittal osteotomy of the mandibular ramus (SOMR) is the most common, allowing a great range of movements and stable internal fixation (SIF), therefore eliminating the need of maxillomandibular block in the postoperative period. Objectives: The purpose of this study was to evaluate the biomechanical resistance of three national systems used for SIF in SOMR in sheep mandibles. Material and methods: The study was performed in 30 sheep hemi-mandibles randomly divided into 3 experimental groups, each containing 10 hemi-mandibles. The samples were measured to avoid discrepancies and then subjected to SOMR with 5-mm advancement. In group I, 2.0x12 mm screws were used for fixation, inserted in an inverted "L" pattern (inverted "L" group). In group II, fixation was performed with two 2.0x12 mm screws, positioned in a linear pattern and a 4-hole straight miniplate and four 2.0x6.0 mm monocortical screws (hybrid group). In group III, fixation was performed with two-hole straight miniplates and eight 2.0x6.0 mm monocortical screws (mini plate group). All materials used for SIF were supplied by Osteosin - SIN. The hemimandibles were subjected to vertical linear load test by Kratos K2000MP mechanical testing unit for loading registration and displacement. Results: All groups showed similar resistance during mechanical test for loading and displacement, with no statistically significant differences between groups according to analysis of variance. Conclusion: These results indicate that the three techniques of fixation are equally effective for clinical fixation of SOMR.