Avaliação de sete famílias S2 prolíficas de minimilho para a produção de híbridos

Sete famílias S2 de minimilho foram cruzadas entre si em esquema dialélico completo. Os híbridos simples obtidos foram avaliados na Estação Experimental de São Manuel, da Faculdade de Ciências Agrárias da Universidade de São Paulo (UNESP-Botucatu). O experimento foi delineado em blocos casualizados com três repetições. As parcelas consistiram de fileiras de 5 m espaçadas entre si por 0,90 m, com 50 plantas cada uma. Avaliaram-se as seguintes características: número de espigas por parcela (NE), massa de espigas com palha (MECP) e sem palha (MESP), comprimento de espigas com palha (CECP) e sem palha (CESP), diâmetro de espigas com palha (DECP) e sem palha (DESP), altura da planta (AP) e da espiga (AE). Estimaram-se os efeitos da capacidade geral e específica de combinação das famílias pelo método 4, modelo estatístico 1, proposto por Griffing. Houve predominância dos efeitos gênicos aditivos para a massa de espigas com palha e sem palha. Entretanto, para o comprimento de espigas sem palha, diâmetro de espigas com palha e sem palha, altura de planta e altura de espigas, os efeitos gênicos aditivos e não aditivos foram equivalentes. Pelas estimativas das capacidades combinatórias para o número de espigas por parcela, massa de espigas com palha e sem palha, a família 27 é a indicada para obter genótipos superiores.

Relationship between oxidative stress, glutathione S-transferase polymorphisms and hydroxyurea treatment in sickle cell anemia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Serum melatonin level and oxidative stress in sickle cell anemia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Capacidade de combinação em sete populações de melancia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Capacidade combinatória e heterose de linhagens de pepino do grupo japonês para caracteres de produção

O objetivo do trabalho foi estimar o efeito da capacidade geral (CGC) e específica (CEC) de combinação e a heterose de linhagens e populações de pepino japonês, empregando-se um topcross. Foram obtidos 16 híbridos experimentais a partir de duas populações testadoras (geração F2 de Yoshinari, T Y, e de Natsusuzumi, T N) e oito linhagens S5 obtidas a partir do híbrido comercial Hokuho. Também foi avaliado o híbrido F1 Hokuho, totalizando 27 tratamentos. O delineamento experimental utilizado foi em blocos casualizados, com quatro repetições e cada parcela foi constituída de quatro plantas. Foram avaliadas as massas totais e comerciais, número de frutos total e comercial, porcentagem de frutos comerciais e massa média de frutos comerciais. A população de Yoshinari (T Y) apresentou, em média, melhor capacidade de se combinar com as linhagens de Hokuho. A linhagem L7 apresentou os maiores valores positivos da estimativa da CGC para a maioria das características avaliadas. Os híbridos H1Y e H1N, que apresentavam a linhagem L1 como parental, foram os que apresentaram maiores valores para a estimativa da CEC com as populações testadoras para a maioria das características avaliadas, enquanto os que tinham a linhagem L5 como parental (H5Y e H5N) apresentaram os menores valores. A população F2 proveniente do híbrido Yoshinari apresentou, em geral, maior potencial de originar linhagens superiores para cruzamentos com linhagens de Hokuho, a fim de se obter híbridos com maior potencial produtivo. A heterose foi positiva para a grande maioria das características avaliadas.

Diallel analysis of maize resistance to Phaeosphaeria maydis

Em programas de melhoramento visando resistência genética a doenças, a estimativa de parâmetros genéticos que governam a resistência permite direcionar a introdução de resistência em germoplasmas. O objetivo deste trabalho foi estimar os efeitos heteróticos, a capacidade geral (CGC) e específica (CEC) de combinação, utilizando-se de dois métodos de avaliação da resistência, à Phaeosphaeria maydis através da análise dialélica de 36 híbridos F1 e de suas nove linhagens genitoras, em experimentos conduzidos em três ambientes. Foi utilizado um delineamento experimental em blocos casualizados com três repetições e a parcela experimental foi representada por uma fileira de 5 m. As diferenças entre as estimativas da capacidade de combinação, em diferentes ambientes e para os dois métodos de avaliação, apresentaram efeitos significativos (P < 0.01) para ambientes (E), CGC e CGC x E. O efeito de CEC e a interação CEC x E não foi significativa para os dois métodos de avaliação. Os efeitos de CGC foram mais importantes que CEC nesse conjunto de linhagens, sugerindo que efeitos genéticos aditivos são mais importantes como fonte de variação para resistência a esta doença. Efeitos heteróticos para resistência foram estimados, sendo possível identificar combinações híbridas específicas entre linhagens com alto potencial para o controle genético deste patógeno. Resultados para os dois métodos de avaliação foram praticamente idênticos, embora o método PI seja de maior praticidade de uso.

Combining ability of Phaseolus vulgaris L. for resistance to common bacterial blight

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho de bezerros de corte alimentados com diferentes fontes protéicas associadas à silagem de sorgo colhida em duas alturas de corte

Foram avaliadas três fontes protéicas (uréia - U, farinha penas - Fp e farelo soja - Fs) associadas a duas silagens de sorgo (silagens de sorgo corte alto - SCA e corte baixo - SCB) por intermédio do desempenho de bezerros de corte, confinados por 84 dias. Foram utilizados 36 bezerros mestiços (Charolês/RedAngus/Nelore), castrados, com cinco meses de idade e pesando em média 146,44 kg. Avaliaram-se o ganho de peso médio diário (GMD); o consumo de matéria seca expressos em kg/dia (CMS), percentagem de peso vivo (CMSPV) e peso metabólico (CMSPM); e a conversão alimentar (CA). O delineamento foi inteiramente casualizado por intermédio de um fatorial 3x2. Houve efeito significativo na interação silagem versus fonte protéica para a variável GMD, com o maior GMD para SCAFp (1,61 kg/animal/dia) versus a SCBFs (1,32 kg/animal/dia). Os demais parâmetros não diferiram estatisticamente quando analisada a interação ou isoladamente a silagem ou fonte protéica. A silagem de sorgo corte alto promoveu numericamente um maior GMD e CMS.

Assessment of aquatic plants in the reservoirs of AES-Tiete and development of an integrated control model for the most important species

The general objective of this work was to develop a monitoring and management model for aquatic plants that could be used in reservoir cascades in Brazil, using the reservoirs of AES-Tiete as a study case. The investigations were carried out at the reservoirs of Barra-Bonita, Bariri, Ibitinga, Promissao, and Nova-Avanhandava, located in the Tiete River Basin; Agua Vermelha, located in the Grande River Basin; Caconde, Limoeiro, and Euclides da Cunha, which are part of the Pardo River Basin; and the Mogi-Guacu reservoir, which belongs to the Mogi-Guacu River basin. The main products of this work were: development of techniques using satellite-generated images for monitoring and planning aquatic plant control; planning and construction of a boat to move floating plant masses and an airboat equipped with a DGPS navigation and application flow control system. Results allowed to conclude that the occurrence of all types of aquatic plants is directly associated with sedimentation process and, consequently, with nutrient and light availability. Reservoirs placed at the beginning of cascades are more subject to sedimentation and occurrence of marginal, floating and emerged plants, and are the priority when it comes to controlling these plants, since they provide a supply of weeds for the other reservoirs. Reservoirs placed downstream show smaller amounts of water-suspended solids, with greater transmission of light and occurrence of submerged plants.

Thermotectonic and fault dynamic analysis of Precambrian basement and tectonic constraints with the Parana basin

The Precambrian crystalline basement of southeast Brazil is affected by many Phanerozoic reactivations of shear zones that developed during the end of the Neoproterozoic in the Brasiliano orogeny. These reactivations with specific tectonic events, a multidisciplinary study was done, involving geology, paleostress, and structural analysis of faults, associated with apatite fission track methods along the northeastern border of the Parana basin in southeast Brazil.The results show that the study area consists of three main tectonic domains, which record different episodes of uplift and reactivation of faults. These faults were brittle in character and resulted in multiple generations of fault products as pseudotachylytes and ultracataclasites, foliated cataclasites and fault gouges.Based on geological evidence and fission track data, an uplift of basement rocks and related tectonic subsidence with consequent deposition in the Parana basin were modeled.The reactivations of the basement record successive uplift events during the Phanerozoic dated via corrected fission track ages, at 387 +/- 50 Ma (Ordovician); 193 +/- 19 Ma (Triassic); 142 +/- 18 Ma (Jurassic), 126 +/- 11 Ma (Early Cretaceous); 89 +/- 10 Ma (Late Cretaceous) and 69 +/- 10 Ma (Late Cretaceous). These results indicate differential uplift of tectonic domains of basement units, probably related to Parana basin subsidence. Six major sedimentary units (supersequences) that have been deposited with their bounding unconformities, seem to have a close relationship with the orogenic events during the evolution of southwestern Gondwana. (c) 2005 Elsevier Ltd. All rights reserved.

Mutagenic and cytotoxic activity of an isocoumarin (Paepalantine) isolated from Paepalanthus vellozioides

A new isocoumarin with antimicrobial activity was isolated from Paepalanthus vellozioides (a native Brazilian plant) and called paepalantine. This study was carried out to assess the mutagenic activity of this new agent in assays with Salmonella typhimurium TA100, TA98, and TA102 and in Chinese hamster ovary (CHO) cell cultures, as well as cytotoxicity to McCoy cells. Paepalantine caused a significant dose-dependent increase in the frequency of revertants in the three strains used in the assay, both with and without S9 mix, in concentrations varying from 2 to 128 mu g/ plate. The mutagenicity was confirmed in assays with CHO cells treated in the G(1), S, and G(2) phases of the cell cycle. There was an increase in the chromosomal aberration frequency, mainly in the G(2) phase. Furthermore, the mitotic index of the treated cultures (40,80, and 160 mu g/ml) was significantly lower, indicating cytotoxicity. The midpoint cytotoxicity values to McCoy cells by the neutral red (NR) and microculture tetrazolium (MTT) techniques resulted in a NR50, and MTT50 of 30 and 38 mu g/ml, respectively. Alterations to the paepalantine structure are suggested to reduce its mutagenic and cytotoxic activity in investigations for its antineoplasic potential (C) 1997 Wiley-Liss, Inc.

Three-dimensional reconstruction of fracture surfaces: Area matching algorithms for automatic parallax measurements

This paper describes two solutions for systematic measurement of surface elevation that can be used for both profile and surface reconstructions for quantitative fractography case studies. The first one is developed under Khoros graphical interface environment. It consists of an adaption of the almost classical area matching algorithm, that is based on cross-correlation operations, to the well-known method of parallax measurements from stereo pairs. A normalization function was created to avoid false cross-correlation peaks, driving to the true window best matching solution at each region analyzed on both stereo projections. Some limitations to the use of scanning electron microscopy and the types of surface patterns are also discussed. The second algorithm is based on a spatial correlation function. This solution is implemented under the NIH Image macro programming, combining a good representation for low contrast regions and many improvements on overall user interface and performance. Its advantages and limitations are also presented.

Use of one-bottle adhesive as an intermediate bonding layer to reduce sealant microleakage on saliva-contaminated enamel

Purpose: To evaluate the influence of three different adhesives, each used as an intermediary layer, on microleakage of sealants applied under condition of salivary contamination. Materials and Methods: Six different experimental conditions were compared, 3 with adhesives and 3 without. After prophylaxis and acid etching of enamel, salivary contamination was placed for 10 s. In Group SC the sealant was applied after saliva without bonding agent and then light-cured. In Group SCA, after saliva, the surface was air dried, and then the sealant was applied and cured. In Groups ScB, SB and PB, a bonding agent (Scotchbond Dual Cure/3M, Single Bond/3M and Prime & Bond 2.1/Dentsply, respectively) was applied after the saliva and prior to the sealant application and curing. After storage in distilled water at 37°C for 24 hrs, the teeth were submitted to 500 thermal cycles (5°C and 55°C), and silver nitrate was used as a leakage tracer. Leakage data were collected on cross sections as percentage of total enamel-sealant interface length. Representative samples were evaluated under SEM. Results: Sealants placed on contaminated enamel with no bonding agent showed extensive microleakage (94.27% in SC; 42.65% in SCA). The SEM revealed gaps as wide as 20 μm in areas where silver nitrate leakage could be visualized. In contrast, all bonding agent groups showed leakage less than 6.9%. Placement of sealant with a dentin-bonding agent on contaminated enamel significantly reduced microleakage (P< 0.0001). The use of a bonding agent as an intermediary layer between enamel and sealant significantly reduced saliva's effect on sealant microleakage.

Analysis of combining ability in soybean cultivars

Eight soybean cultivars (Doko, Bossier, Ocepar-4, BR-15, FT-Cometa, Savana, Paraná and Cristalina) were crossed in a diallel design. Plants of the F1 generation and their parents were evaluated under short-day conditions for the determination of the general (GCA) and specific (SCA) combining ability. The estimated GCA and SCA values were significant for the evaluated traits except for the total cycle. Highest GCA effects for the traits days to flowering, plant height, insertion height, number of branches and total cycle were estimated for the cultivars Doko, Cristalina and Savana. The variability observed in the trait days to flowering can, for the most part, be explained by additive effects.

Persistence of epoxy-based sealer residues in dentin treated with different chemical removal protocols

The presence of residual endodontic sealer in the pulp chamber may cause discoloration of the dental crown and interfere with the adhesion of restorative materials. The aim of this study was to compare the efficacy of different solvents in removing residues of an epoxy resin-based sealer (AH Plus) from the dentin walls of the pulp chamber, by scanning electron microscopy (SEM). Forty-four bovine incisor dental crown fragments were treated with 17% EDTA and 2.5% NaOCl. Specimens received a coating of AH Plus and were left undisturbed for 5 min. Then, specimens were divided in four groups (n = 10) and cleaned with one of the following solutions: isopropyl alcohol, 95% ethanol, acetone solution, or amyl acetate solution. Negative controls (n = 2) did not receive AH Plus, while in positive controls (n = 2) the sealer was not removed. AH Plus removal was evaluated by SEM, and a score system was applied. Data were analyzed by Kruskal-Wallis and Dunn tests. None of the solutions tested was able to completely remove AH Plus from the dentin of the pulp chamber. Amyl acetate performed better than 95% ethanol and isopropyl alcohol (p < 0.05), but not better than acetone (p > 0.05) in removing the sealer from dentin. No significant differences were observed between acetone, 95% ethanol, and isopropyl alcohol (p > 0.05). It was concluded that amyl acetate and acetone may be good options for cleaning the pulp chamber after obturation with AH Plus. SCANNING 35:17-21, 2013. © 2012 Wiley Periodicals, Inc. © Wiley Periodicals, Inc.