12 resultados para SAP POS DM
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
Productivity and nutritional quality of Tobiata grass as a function of NPK fertilization. The present study had as objective to study five N rates (0, 50, 100, 150 and 200 kg ha(-1)), two P(2)O(5) rates (96 and 30 kg ha(-1)) as superphosphate triple, and two doses of K(2)O (170 and 143 kg ha(-1)) as potassium chloride, in the forage Panicum maximum cv. Tobiata, with irrigation. The experiment was conducted using a randomized blocks design with four replicates. In the implantation of the experiment, P and K were applied based on theoretical doses required to reach values of 40 mg dm(-3) of P and K 5% of CTC. After three cuts, dry mass produced by the forage was estimated in order to obtain the values of the nutrients exported by the plant. Only after this procedure did the application of the doses of N take place. The production of dry mass - DM, crude protein - CP, neutral-detergent fiber - NDF, and acid-detergent fiber - ADF, were influenced by cuts; increasing N fertilization increased the production of DM, CP and decreased ADF and NDF, providing better forage quality. The fertilization with phosphorus and potassium can be done based on DM production or P and K content in soil.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The Serido Group is a deformed and metamorphosed metasedimentary sequence that overlies early Paleoproterozoic to Archean basement of the Rio Grande do Norte domain in the Borborema Province of NE Brazil. The age of the Serido Group has been disputed over the past two decades, with preferred sedimentation ages being either Paleoproterozoic or Neoproterozoic. Most samples of the Serido Formation, the upper part of the Serido Group, have Sm-Nd T-DM ages between 1200 and 1600 Ma. Most samples of the Jucurutu Formation, the lower part of the Serido Group, have T-DM ages ranging from 1500 to 1600 Ma; some basal units have T-DM ages as old as 2600 Ma, reflecting proximal basement. Thus, based on Sm-Nd data, most, if not all, of the Serido Group was deposited after 1600 Ma and upper parts must be younger than 1200 Ma.Cathodoluminescence photos of detrital zircons show very small to no overgrowths produced during ca. 600 Ma Brasiliano deformation and metamorphism, so that SHRIMP and isotope dilution U-Pb ages must represent crystallization ages of the detrital zircons. Zircons from meta-arkose near the base of the Jucurutu Formation yield two groups of ages: ca. 2200 Ma and ca. 1800 Ma. In contrast, zircons from a metasedimentary gneiss higher in the Jucurutu Formation yield much younger ages, with clusters at ca. 1000 Ma and ca. 650 Ma. Zircons from metasedimentary and metatuffaceous units in the Serido Formation also yield ages primarily between 1000 and 650 Ma, with clusters at 950-1000, 800, 750, and 650 Ma. Thus, most, if not all, of the Serido Group must be younger than 650 Ma. Because these units were deformed and metamorphosed in the ca. 600 Ma Brasiliano fold belt during assembly of West Gondwana, deposition probably occurred ca. 610-650 Ma, soon after crystallization of the youngest population of zircons and before or during the onset of Brasiliano deformation.The Serido Group was deposited upon Paleoproterozoic basement in a basin receiving detritus from a variety of sources. The Jucurutu Formation includes some basal volcanic rocks and initially received detritus from proximal 2.2-2.0 Ga (Transamazonian) to late Paleoproterozoic (1.8-1.7 Ga) basement. Provenance for the upper Jucurutu Formation and all of the Serido Formation was dominated by more distal and younger sources ranging in age from 1000 to 650 Ma. We suggest that the Serido basin may have developed as the result of late Neoproterozoic extension of a pre-existing continental basement, with formation of small marine basins that were largely floored by cratonic basement (subjacent oceanic crust has not yet been found). Immature sediment was initially derived from surrounding land; as the basin evolved much of the detritus probably came from highlands to the south (present coordinates). Alternatively, if the Patos shear zone is a major terrane boundary, the basin may have formed as an early collisional foredeep associated with south-dipping subduction. In any case, within 30 million years the region was compressed, deformed, and metamorphosed during final assembly of West Gondwana and formation of the Brasiliano-Pan African fold belts. (C) 2003 Elsevier B.V. All rights reserved.
Resumo:
Faciologic analysis method was applied to after-basaltic sedimentary deposits in Triangulo Mineiro (MG) area. Faciologic association 1 (Adamantina formation) and unities 1 to 5 (Uberaba formation) are related to the fluvial and lake deposits: faciologic association 3 (Ponte Alta Member) and 2 (Sierra da Galga Member) represent the sedimentary deposits associated to the alluvial fans conditions. With faciologic association and unities it could be to recognize the paleogeografic and tectonic conditions in sedimentation time of that depositional tract. -English summary
Resumo:
Background and Objectives - Postoperative pain is one of the major discomforts but often under treated, especially in the pediatric patient. The aim of this study was to evaluate nasal morphine postoperative analgesia as an alternative drug administration route and show its applicability, effectiveness, tolerability and side effects. Methods - Participated in this study 20 patients aged 3 to 13 years, physical status ASA I and II sequentially submitted the different small and medium-size surgeries. Analgesia was obtained with nasal morphine hydrochloride in aqueous solution in variable concentrations of 2%, 1%, 0.5%, 0.25% and 0.125%. The dose for each instillation has been 0.1 mg.kg -1 at three-hour intervals for 36 postoperative hours. Quality of analgesia in pre-verbal age patients was evaluated by a pain intensity scale based on facial expression and crying, sleep, motor activity, sociability and food ingestion was used. Standardized evaluations were performed at 3-hour intervals. A four-grade scale was used to evaluate tolerability, where: 1) Good; 2) Regular; 3) Bad; 4) Very bad. Result - Postoperative analgesia results have proven to be good and safe, especially from the third evaluation on (6 hours). Drug tolerability has been good, although side effects were observed, especially nausea and vomiting. Conclusions - Patients and relatives accepted the method very well. The nasal route was considered an adequate way for opioid administration although more studies are needed to accept it as a routine for postoperative morphine analgesia.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
In recent years a great worldwide interest has arisen for the development of new technologies that enable the use of products with less environmental impact. The replacement of synthetic fiber plants is a possibility very important because this fiber is renewable, biodegradable and few cost and cause less environmental impact. Given the above, this work proposes to develop polymeric composites of epoxy resin and study the behavior of these materials. Both, the epoxy resin used as matrix in the manufacture of sapegrass fiber composite, as tree composites formed by: epoxy/unidirectional sapegrass long fiber, 75% epoxy/25% short fiber, by volume, and 80% epoxy/20% short fiber, by volume, were characterized by bending, and the composites produced with short fibers random were inspected by Optical Microscopy and Acoustics Inspection (C-Scan). For the analysis of the sapegrass fiber morphology, composites 75% epoxy/25% short fiber (sheet chopped) and 80% epoxy/20% short fiber images were obtained by optical microscope and the adhesion between polymer/fiber was visualized. As results, the flexural strength of composites epoxy/unidirectional long fibers, 75% epoxy/25% short fiber and 80% epoxy/20% short fiber were 70.36 MPa, 21.26 MPa, 25.07 MPa, respectively. Being that composite showed that the best results was made up of long fibers, because it had a value of higher flexural strength than other composites analyzed
Resumo:
Due to growing concerns for reducing environmental damage caused by the use of non-renewable raw materials, there is a growing demand for research related to aggregate technology with environmental preservation. Thus, the use of non-renewable materials and less aggressive materials has been gaining attention. About composite materials, the exchange of synthetic fibers by natural fibers, especially vegetable fiber as reinforcement, has been increasing, due to its physical-chemical properties such as mechanical strength, nontoxic, low cost, low density, processing flexibility, non-abrasive to the process equipment, requiring simple surface treatments, etc. This objective was to process composites reinforced with long fibers of sapegrass in epoxy matrix and characterize the composites through mechanical tests. Three groups of composites were prepared according to the treatment received by the reinforcement: without treatment, alkali treatment at concentration of 5% w/v and alkali treatment at 10% w/v concentration. The materials were analyzed by tensile and flexural, and tests also optical microscopy and scanning electron microscopy (SEM). The results were statistically analyzed. As the main result, the alkali treatment of 5% in the sapegrass fibers increases the tensile and flexural strength, as a consequence of the improve adhesion between matrix and reinforcement
Resumo:
Pós-graduação em Ciência Florestal - FCA