Morfologia de frutos e sementes de espécies arbóreas do gênero Solanum L.

O objetivo do trabalho foi caracterizar a morfologia do fruto e da semente de três espécies florestais nativas do Brasil, Solanum granuloso-leprosum Dunal, S. lycocarpum A.St.-Hil. e S. pseudoquina A.St.-Hil., recomendadas para plantações destinadas à recuperação de áreas degradadas. Os frutos são indeiscentes, carnosos, do tipo baga, globosos, polispérmicos e constituídos por dois ou mais lóculos. As sementes são estenospérmicas, campilótropas, elipsóides, comprimidas, apresentando seção longitudinal largo-ovalada ou achatado-ovalada e seção transversal elíptica. Hilo mediano-marginal localizado em uma depressão e micrópila arredondada. Sementes albuminosas, com endosperma abundante, periférico, carnoso-firme, semitransparente e de coloração esbranquiçada. Embrião axial, linear, contínuo e curvado. em Solanum lycocarpum e S. pseudoquina o embrião é circinado e em S. granuloso-leprosum é espiralado.

Morphologic and morphometric analysis of testis of Pseudis limellum (Cope, 1862) (Anura, Hylidae) during the reproductive cycle in the Pantanal, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphological description of Amblyomma brasiliense Aragão, 1908 (Acari: Ixodidae) larvae and nymphs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological Aspects and Storage of Dypsis leptocheilos (Hodel) Beentje & J. Dransf. (Arecaceae) Seeds

Dypsis leptocheilos (Hodel) Beentje & J. Dransf. palms are widely used in landscaping, however there is a lack of studies about its biology, especially on the morphology of its seedling disseminules and the ideal seed storage time without loss of viability. The objectives of this work were to describe the morphological aspects and to study the storage effect on the germination of D. leptocheilos seeds. The experiments were performed at FCAV/UNESP, Jaboticabal Campus, São Paulo State, Brazil. In order to obtain a morphology description 100 disseminules were sowed in vermiculite. The external and internal sides of the disseminules as well as the representative phases of the germination process were sketched with the help of a light chamber attached to a stereomicroscope. Five treatments were arranged in order to study the storage effects on the seeds (four months of storage and straight after harvest), with four replicates with 25 disseminules each (seeds with attached endocarp) in a completely randomized design. The germination test was conducted over a 140 days period and noted every two days. In order to calculate the germination percentage (% G) and the Germination Speed Index (GSI), the seeds were considered germinated when the germinative button appeared. The data were submitted to a polynomial regression analysis to verify the behavior of the variables over the storage period. The D. leptocheilos seeds have rounded shape, ruminate endosperm and hard consistency. The embryo is lateral, peripheral and relatively undifferentiated, with approximately 3 mm long and conical shape. The germination percentage increased from 17% for seeds sowed straight after harvest to 73% for those stored over a three-month period. For the GSI the increase was about 0.85%. It was concluded that the germination of D. leptocheilos is of an adjacent ligulate type. Furthermore, the seeds stored for 3 months at 14 degrees C showed both higher percentage and germination speed.

Morphology of the eggs of the genus Belminus (Hemiptera: Reduviidae: Triatominae) by optical and scanning electron microscopy

The external morphology of eggs of the species Belminus corredori Galvao & Angulo, 2006, Belminus herreri Lent & Wygodzinsky, 1979 and Belminus ferroae Sandoval, Pabon, Jurberg & Galvao, 2007 is described for the first time using scanning electron microscopy (SEM). Females lay one egg at a time; the shape of the egg is oval with lateral flattening, a rounded caudal area and a true and simple convex operculum. The average size of the egg among these species is 0.51-0.58 mm in length and 0.36-0.4 mm in width. As a generic character we highlight the discovery of a chorion rim with one to four grooves always joined to the micropyles. All species present a clear polygonal pattern only in the operculum and in the egg's cephalic region, while the median and caudal regions show a smooth appearance, features that are shared only with the eggs of the genus Alberprosenia. A discriminant analysis of the polygonal design of the operculum proved to be useful for the identification of the species.

Permian stromatolites associated with bivalve coquina beds-Angatuba, SP, Brazil (Teresina Formation, Parana Basin)

Silicified stromatolites have been described in the Permian Teresina Formation, Passa Dois Group, of the Parana Basin. These stromatolites occur as blocks in the Fazenda Monte Alegre area at the headwaters of the creek known as Corrego Catanduva in the municipality of Angatuba. These blocks originate from the Serra de Angatuba region and were recognized in a road that was cut in the midst of sandstones and siltites. The stromatolites are isolated bioherms that are domed to subspherical with a flat base in profile and a rounded to lenticular shape in plan view. The stromatolites exhibit a reddish coloration and are composed of microcrystalline quartz. Lamination is continuous, non-columnar, and anastomosed, showing parallel to divergent growth; however, divergent columns also occur, especially at the tops of the bioherms. The lamination is fine and well preserved, with alternating light and dark laminas. Microfossils of filamentous cyanobacteria are preserved and were related to the genera Microcoleus and Rivularia. Silicified bivalves occur in association with the stromatolites and are preserved in the form of coquina beds and rare isolated specimens within the bioherms. The described specimens belong to the Pinzonella illusa biozone, with representatives of the species Pinzonella illusa, Angatubia cowperesioides, and Houldausiella elongata. The formation environment of these stromatolites is associated with tidal plains of shallow, brackish, relatively calm, warm waters of good luminosity with the presence of weak currents. There was likely a low level of predation, and the environment may have been hypersaline. The coquina beds associated with the stromatolites indicate a probable proximal tempestite, i.e., they were formed near the coastline. The stromatolites were originally composed of carbonates, although these were replaced by silica during early diagenesis.

Light microscopy and ultrastructure of the liver of Astyanax altiparanae Garutti and Britski, 2000 (Teleostei, Characidae).

Livers of thirty specimens of Astyanax altiparanae obtained from a commercial fish farm were subjected to light and transmission electron microscopy, in order to describe the hepatic parenchyma and the intrahepatic exocrine pancreatic tissue. Anatomically, the liver showed only three hepatic lobes. Histological analysis demonstrated that the hepatocytes were spread out as anastomotic cords, arranged in two cellular layers and surrounded by sinusoids. The intrahepatic exocrine pancreatic tissue exhibited an acinar arrangement and was diffused in the hepatic parenchyma. Ultrastructural analysis showed that the hepatocytes had a rounded nucleus and a rough endoplasmatic reticulum, with a parallel disposition to the nuclear membrane. The exocrine pancreatic cells showed secretion granules at the apical portion, and the rough endosplasmatic reticulum was concentrically distributed.

Um método eficiente para resolução do problema de Despacho Ótimo de Reativos com controle discreto do TAP dos transformadores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

Leakage current behavior of Bi3.25La0.75Ti3O12 ferroelectric thin films deposited on different bottom electrodes

Bi3.25La0.75Ti3O12 (BLT) thin films were grown on LaNiO3 (LNO), RuO2 (RuO2) and La0.5Sr0.5CoO3 (LSCO) bottom electrodes by using the polymeric precursor method and microwave furnace. The bottom electrode is found to be an important parameter which affects the crystallization, morphology and leakage current behaviors. The XRD results clearly show that film deposited on LSCO electrode favours the growth of (117) oriented grains whereas in films deposited on LNO and RuO2 the growth of (001) oriented grains dominated. The film deposited on LSCO has a plate-like grain structure, and its leakage current behavior is in agreement with the prediction of the space-charge-limited conduction model. on the other hand, the films deposited on RuO2 and LNO electrodes present a rounded grain shape with some porosity, and its high field conduction is well explained by the Schottky and Poole-Frenkel emission models. The remanent polarization (P-r) and the drive voltage (V-c) were in the range of 11-23 mu C cm(-2) and 0.86-1.56 V, respectively, and are better than the values found in the literature. (c) 2007 Published by Elsevier B.V.

Management of tracheobronchial foreign body in children

To study cases of foreign bodies (FB) in the tracheobronchial tree investigating the clinical and radiological FB characteristics, complications and endoscopic and surgical intervention. Medical and radiological records review of all FB aspiration cases treated at S (a) over tilde uo Paulo State University Hospital over the last 30 years. One hundred and sixty-four FB cases were analyzed; 57% were male, 84% of these were under 16 years old. The most common clinical manifestations were coughing (68.3%) and choking (54.9%). The most common FBs were seeds (peanut, bean, maize) and also small metal or plastic objects. Radiography was normal in 21.3%, atelectasis was present in 40.9%, hyperinsufflation in 17.1% and the FB was radio-opaque in 20.7%. FB time in the bronchial tree varied from hours to years. The most serious complications, as fibroatelectasis and difficult resolution pneumonia, were caused by the long time that the FB remained in the bronchial tree. FB extraction was by endoscopy in 89% of cases, while 6% required surgical extraction or resection of destroyed part of lung, and 5% spontaneously eliminated the FB. There was no mortality in this series. Coughing and choking were the commonest clinical findings. Most FBs were dried seeds. Complications were due to delays in diagnosis, and most would not have existed if the doctor had given credence to the history. Radiography can be normal as most FBs are radiotransparent. FB extraction was by endoscopy, but a few cases required surgery and others were spontaneously eliminated.

Massa paranasal: dacrioestenose congênita? Relato de caso

O objetivo deste é descrever uma criança portadora de massa paranasal, atentando para a importância dos diagnósticos diferenciais. RELATO do CASO: ACS, 6 meses, sexo feminino, desde o nascimento apresentando abaulamento não inflamatório, no canto medial do olho esquerdo, lacrimejamento e hiperemia no olho direito. Ao exame apresentava fenômeno de Bell negativo bilateral, lagoftalmo à direita, ulceração e opacidade corneana à direita; presença de lesão arredondada, de superfície lisa no canto medial do olho esquerdo, sem sinais inflamatórios, medindo aproximadamente 2 cm de diâmetro, não pulsátil. À palpação, a lesão era elevada, de consistência fibroelástica, imóvel, indolor, irredutível. À propedêutica das vias lacrimais, não havia refluxo à compressão, o teste de Milder foi negativo em ambos olhos e as vias apresentavam-se pérvias à dacriocistografia. O exame tomográfico revelou tratar-se de meningocele fronto-etmoidal. COMENTÁRIOS: Os autores chamam a atenção para a adequada semiologia para a investigação das massas paranasais, a fim de se instituir o adequado tratamento.

Survey radiography and computerized tomography imaging of the thorax in female dogs with mammary tumors

Background: Accurate early diagnosis of lung metastases is important for establishing therapeutic measures. Therefore, the present study aimed to compare survey thoracic radiographs and computerized tomography (CT) scans to specifically identify lung metastases in female dogs with mammary tumors.Methods: Twenty-one female dogs, weighing 3 to 34 kg and aged from 5 years to 14 years and 10 months, with mammary tumors were studied. In all dogs before the imaging examinations, fine-needle aspiration cytology of the mammary tumors was performed to confirm the diagnosis. Three-view thoracic radiographs were accomplished: right lateral, left lateral and ventrodorsal views. Sequential transverse images of the thorax were acquired on a spiral Scanner, before and after intravenous bolus injection of nonionic iodine contrast. Soft-tissue and lung windows were applied. All the mammary tumors were surgically removed and examined histologically.Results: The correlation between the cytological and histological results regarding presence of malignancy was observed in only 17 cases. In radiographic examinations, no dog displayed signs of lung metastases or thorax chest lesions. CT detected lung metastasis in two cases, while small areas of lung atelectasis located peripherally were found in 28.57% of the dogs.Conclusion: In this study population, spiral CT showed higher sensitivity than chest radiographies to detect lung metastasis; this indicates that CT should be performed on all female dogs with malignant mammary tumors.

Histochemical and morphological characteristics of the levator ani muscle in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of thermal and mechanical stresses on the strength of intact and relined denture bases

Statement of problem. Denture bases may become increasingly weaker as a result of thermal stress and flexural cyclic loading. Information regarding this potential problem and its relationship to the denture base reline is limited.Purpose. This study evaluated the influence of thermal and mechanical stresses on the strength of intact and relined denture bases.Material and methods. Twenty-eight microwave-polymerized (Acron MC) intact denture bases were prepared in the shape of a 3-mm-thick maxillary denture. Additionally, fifty-six 2-mm-thick denture bases were relined with 1 mm of autopolymerizing resin (Tokuyama Rebase Fast II or New Truliner) (n = 28). Intact and relined specimens were divided into 4 groups (n = 7) as follows: without stress (control); a mechanical stress at 0.8 Hz for 10,000 cycles; 5000 thermal cycles between 5 degrees C and 55 degrees C; or a combination thermo-mechanical stress. The specimens were vertically loaded in compression with a rounded rod at 5 mm/min until failure, using a universal testing machine. Data on maximum fracture load (N), deflection at fracture (%), and fracture energy (N-mm) were analyzed by 2-way analysis of variance and Student-Newman-Keuls tests (alpha = .05).Results. The strength of the denture bases relined with New Truliner was not significantly affected by any of the experimental conditions, but comparing the control groups, New Truliner exhibited the lowest maximum fracture load values. The maximum fracture load of intact denture bases (P = .002) and those relined with Tokuyama Rebase Fast II (P = .01) showed a significant decrease after thermal stress. Additionally, cyclic loading significantly decreased the maximum fracture load (P < .001), deflection at fracture (P = .025), and fracture energy (P < .001) of intact denture bases and those relined with Tokuyama Rebase (P values of .002, .039, and .001, respectively).Conclusion. Thermal and mechanical stresses exert deleterious effects on the strength of intact and/or relined denture bases, which vary according to the relining material used.