A new island species of Scinax (Anura; Hylidae) from southeastern Brazil

A new species of hylid frog, from the genus Scinax, is described from Ilha de Porcos Pequena at the southern coast of São Paulo State, southeastern Brazil. The new species belongs to the Scinax perpusillus species group and is diagnosed by the following set of characters: moderate-size (males 16.2-18.8 turn SVL, female 18.8-20.6 mm SVL); canthus rostralis distinct and well defined; V-shaped depression between nostrils; eyes protruding and prominent, glandular skin surface of legs. This new species is found only on Ilha de Porcos Pequena, an island of approximately 24 ha and, therefore, is threatened because of restricted range size and susceptibility to habitat modification.

Effects of different sampling intervals on apparent protein and energy digestibility of common feed ingredients by juvenile oscar fish (Astronotus ocellatus)

O presente estudo avaliou a digestibilidade aparente da proteína e da energia de ingredientes (farelo de soja, farinha de peixe, farelo de trigo e milho) por juvenis de apaiari (Astronotus ocellatus) usando dois diferentes intervalos de coleta (30 min. e 12h). Os 160 juvenis de apaiari utilizados (22,37 ± 3,06 g de peso corporal) foram divididos em quatro tanques rede plásticos e cilíndricos, cada um colocado em um tanque de alimentação de 1.000 L. O experimento foi inteiramente casualizado em esquema fatorial 2 x 4 (2 intervalos de coleta de fezes e 4 ingredientes foram) com quatro repetições. Os testes estatísticos não detectaram efeito da interação entre o intervalo de coleta e tipo de ingrediente nos coeficientes de digestibilidade. O intervalo de coleta não afetou a digestibilidade da proteína e da energia. As características físicas das fezes dos juvenis de apaiari aparentemente as tornam menos sensíveis à perda de nutrientes por lixiviação, permitindo intervalos de coleta maiores. A digestibilidade da proteína dos ingredientes avaliados foi semelhante, mostrando que a digestibilidade aparente de ingredientes animais e vegetais por juvenis de apaiari é eficiente. Os coeficientes de digestibilidade da energia foram maiores para a farinha de peixe e o farelo de soja comparado a farelo de trigo e milho. Ingredientes ricos em carboidratos (farelo de trigo e milho) apresentaram os piores coeficientes de digestibilidade da energia e, portanto, não são usados eficientemente pelos juvenis de apaiari.

Spray deposition on weeds of common bean crops

A.C.P. Rodrigues-Costa, D. Martins, N.V. Costa, and M.R.R. Pereira. 2011. Spray deposition on weeds of common bean crops. Cien. Inv. Agr. 38(3): 357-365. Weed control failure in common bean (Phaseolus vulgaris L.) production may be related to inappropriate herbicide application techniques. The purpose of this study, therefore, was to evaluate the amount of spray solution deposition that occurred on the weeds, Bidens pilosa L. and Brachiaria plantaginea (Link) Hitch., both within and between rows of common beans. The research was arranged in a randomized block design with four replications. The following 6 spray nozzles were used: flat fan nozzles XR 110015 VS (150 L ha(-1)) and XR 11002 VS (200 L ha(-1)); cone nozzles TX VK 6 (150 L ha(-1)) and TX VK 8 (200 L ha(-1)); and twin flat fan nozzles TJ60 11002 VS (150 L ha(-1)) and TJ60 11002 VS (200 L ha-1). The results showed that the loss of the spray solution on the soil occurred mainly within the bean rows and with a high intensity when using a nozzle spraying 200 L ha(-1). At 30 days after sowing, the TX (150 L ha(-1)) nozzle was the only nozzle that promoted deposits of less than 210.0 mu L g(-1) of dry mass. The spray nozzles showed a good performance in the deposition of the spray solution on the weeds that occurred both within and between the rows. However, for both species there was great variation in individual deposits depending on their location in relationship to the plants.

The nitrogen sufficiency index underlying estimates of nitrogen fertilization requirements of common bean

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Direct and simultaneous spectrophotometric determination of Ni (II) and Co (II) using diethanoldithiocarbamate as complexing agent

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental measurements of the NOx and CO concentrations operating in oscillatory and non-oscillatory burning conditions

The effects of combustion driven acoustic oscillations in carbon monoxide and nitrogen oxides emission rates of a combustor operated with liquefied petroleum gas (LPG) were investigated. Because the fuel does not contain nitrogen, tests were also conducted with ammonia injected in the fuel, in order to study the formation of fuel NOx. The main conclusions were: (a) the pulsating combustion process is more efficient than the non-pulsating one and (b) the pulsating combustion process generates higher rates of NOx, with and without ammonia injection, as shown by CO and NO concentrations as function of the O-2 concentration. An increase in the LPG flow rate, keeping constant the air to fuel ratio, increased the acoustic pressure amplitude and the frequency of oscillation. The injection of ammonia had no influence on either pressure amplitude or frequency. (c) 2005 Elsevier Ltd. All rights reserved.

Adsorption of Cu(II) and Co(II) complexes on a silica gel surface chemically modified with 2-mercaptoimidazole

The isotherms of adsorption of MeX2 (Me = Cu2+, Co2+; X = Cl-, Br-, ClO4-) by silica gel chemically modified with 2-mercaptoimidazole (SiMI) were studied in acetone and ethanol solutions, at 25 degrees C. Covalently attached 2-mercaptoimidazole molecule to silica gel surface adsorbs MeX2 from solvent by forming a surface complex. The metal is bonded to the surface through the nitrogen atom of attached 2-mercaptoimidazole. At low loading, the electronic and ESR spectral parameters indicated that the Cu2+ complexes are in a distorted-tetragonal symmetry field. The d-d electronic transition spectra showed that for Cu(ClO4)(2) complex, the peak of absorption did not change for any degree of metal loading and for Cl- and Br- complexes, the peak maxima shifted to higher energy with lower metal loading. The CoX2(X = Cl-, Br-, ClO4-) analogues possess a distorted-tetrahedral field.

Dosimetric properties of UV irradiated calcium co-doped borate glass-ceramic

The thermoluminescence (TL) response of Dy and Li doped 20CaB(4)O(7)-80CaB(2)O(4) (Wt%) glass-ceramic irradiated with ultraviolet (UV) radiation was studied. In order to act as TL activator ions, the Dy and Li ions were included in the matrix during the melting process to increase its TL efficiency. A single crystalline CaB2O4 phase was present in the glass-ceramic as determined by X-ray diffraction (XRD). The glass-ceramic 20CaB(4)O(7)-80CaB(2)O(4):Dy,Li wt% (named 20CBO7:Dy,Li) is a newly prepared TL material. Its thermoluminescent dosimetric characteristics have shown a linear response under UV radiation exposure and a good TL signal reproducibility, thus proving to be a promising material for using as an ultraviolet radiation dosimeter. (C) 2007 Elsevier B.V. All rights reserved.

Shear bond strength of a ceramic to Co-Cr alloys

Statement of problem. Different combinations of Co-Cr alloys bonded to ceramic have been used in dentistry; however, the bond strength of ceramic to metal can vary because of different compositions of these alloys.Purpose. The purpose of this study was to evaluate the shear bond strength of a dental ceramic to 5 commercially available Co-Cr alloys.Material and methods. Five Co-Cr alloys (IPS d.SIGN 20, IPS d.SIGN 30, Remanium 2000, Heranium P, and Wirobond C) were tested and compared to a control group of an Au-Pd alloy (Olympia). Specimen disks, 5 mm high and 4 mm in diameter, were fabricated with the lost-wax technique. Sixty specimens were prepared using opaque and dentin ceramics (VITA Omega 900), veneered, 4 mm high and 4 mm in diameter, over the metal specimens (n = 10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 0.5 mm/min. After shear bond testing, fracture surfaces were evaluated in a stereomicroscope under x25 magnification. Ultimate shear bond strength (MPa) data were analyzed with 1-way ANOVA and the Tukey HSD test (alpha = .05).Results. The mean (SID) bond strengths (MPa) were: 61.4 (7.8) for Olympia; 94.0 (18.9) for IPS 20; 96.8 (10.2) for I PS 30; 75.1 (12.4) for Remanium; 71.2 (14.3) for Heranium P; and 63.2 (10.9) for Wirobond C. Mean bond strengths for IPS 20 and IPS 30 were not significantly different, but were significantly (P<.001) higher than mean bond strengths for the other 4 alloys, which were not significantly different from each other.Conclusions. Bond strength of a dental ceramic to a Co-Cr alloy is dependent on the alloy composition.

Thermal decomposition and stability in a series of heterobimetallic carbonyl compounds of the type [Fe(CO)4(HgX)2] (X=Cl, Br, I)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

ISOENZYMATIC POLYMORPHISM and ACTIVITY of PEROXIDASES of COMMON BEAN(Phaseolus vulgaris L.) UNDER SALINE STRESS

Uma das utilizações da técnica de cultura de tecidos para o melhoramento vegetal é a identificação de linhas de células que apresentem tolerância ao estresse salino. Para se estudar os mecanismos bioquímicos envolvidos na expressão genética da tolerância a salinidade, calos oriundos de eixos embrionários de quatro cultivares de feijão (Phaseolus vulgaris L.; cultivares IAC - carioca, IAPAR 14, JALO-EEP 558, BAT - 93), foram cultivados em meio sólido Murashige & Skoog (1962), suplementado com NaCl nas concentrações de 0, 20, 40, 60 e 80 mM. Após 14 dias de incubação, os calos foram coletados e analisados quanto aos padrões isoenzimáticos e de atividade das peroxidases. Os cultivares BAT e IAPAR apresentaram duas zonas de atividade em comum na região anódica e apenas uma zona enzimática específica a cada um deles (migração mais rápida).Possivelmente as duas zonas anódicas intermediárias sejam produtos do mesmo loco enzimático, porém com alelos diferentes, consequentemente diferentes mobilidades eletroforéticas. O cv. JALO apresentou duas zonas anódicas de atividade em comum com os cultivares IAC e IAPAR com uma zona anódica exclusiva de migração mais lenta, a qual apresentou atividade mais intensa de todos os cultivares analisados. Este cultivar revelou ainda uma zona catódica provavelmente dimérica e heterozigota nos indivíduos de todos os tratamentos aplicados. Provavelmente, esta é a mesma zona que ocorre em homozigose com fixação do alelo lento para os indivíduos de todos os tratamentos efetuados nos cultivares BAT e IAPAR. O cv. IAC apresentou duas bandas anódicas em comum com os cv. IAPAR e JALO. Apresentou também a banda anódica mais rápida em comum com o cv. IAPAR e uma banda anódica exclusiva de migração mais lenta. Curiosamente, os indivíduos deste cv. mantidos em meio suplementado com 20 mM de NaCl não apresentaram atividade nas três zonas anódicas mais lentas. Ocorreu no cv. IAC uma única zona de atividade catódica, dimérica e heterozigota para os indivíduos provenientes de todos os tratamentos, composta provavelmente de dois alelos diferentes da zona correspondente ao cv. JALO. Amostras provenientes dos tratamentos 40 e 60 mM de NaCl, desta zona catódica, apresentaram maior atividade enzimática. A análise da atividade da peroxidase no extrato bruto, revelou que os cultivares responderam diferentemente ao aumento da concentração salina no meio de cultura, com aumento pronunciado dessa atividade nos cultivares IAC e JALO.

REACTIONS OF MERCURIC ACETATE WITH PENTACARBONYLIRON IN ALCOHOLS - CRYSTAL AND MOLECULAR-STRUCTURES OF HG[FE(COOR)(CO)(4)](2) (R=CH3, C2H5)

Reactions of Hg(CH3COO)(2) with [Fe(CO)(5)] in MeOH and EtOH lead to the compounds Hg[Fe(COOR)(CO)(4)](2) (I for R = CH3 and II for R = C2H5). Crystals of I are triclinic, P (1) over bar, with a = 6.272(2), b = 6.441(3), c = 11.703(4) Angstrom, a = 92.94(3)degrees, beta = 103.77(3)degrees, gamma = 96.10(2)degrees, and Z = 1. Crystals of II are tetragonal, I4(1)/a, with a = 17.906(3) Angstrom, c = 12.756(2) Angstrom, and Z = 8. The geometry around Hg is linear for compound I and approximately linear for compound II. The Hg-Fe distances are 2.5716(8) and 2.575(4) Angstrom for compounds I and II, respectively. The geometry around the Fe in both compounds is approximately octahedral. The carboalkoxy group is cis to Hg in both compounds with Fe-C distances equal to 2.034(6) and 2.05(4) Angstrom for compounds I and II, respectively.

Embryos of common thresher shark Alopias vulpinus in southern Brazil, south Atlantic Ocean

Eight embryonic thresher sharks Alopias vulpinus (53.9-124 cm total length) were collected from two females caught by commercial longline off southern Brazil in September and November 2004. Morphometric measurements are provided. (c) 2006 the Authors.

IDENTIFICATION OF COMMON FRAGILE SITES IN CHROMOSOMES OF 2 SPECIES OF BAT (CHIROPTERA, MAMMALIA)

In the karyotypes of the bat species Molossus ater and M molossus, spontaneous and bromodeoxyuridine (BrdU)- or aphidicolin (APC)-sensitive fragile sites were located. Four chromosome regions harbored APC-sensitive fragile sites: 1q9 and 8q4 in both M ater and M molossus, 3q3 in M ater, and 1p7 in M molossus. The fragile sites in 1q9 and 8q4 were also observed without induction in M molossus. BrdU-sensitive fragile sites were not detected. Despite observations in several other species, the fragile sites detected in Molossus are not coincident with the breakpoints involved in the chromosome rearrangements occurring in the evolution of 7 species of the Molossidae family.