Reutilization of chemical waste in methodologies for analyses of neutral detergent fiber and acid detergent fiber

The disposal of chemical waste and the precision of analyses of the neutral (NDF) and acid (ADF) detergent fiber contents were evaluated utilizing conventional (Van Soest) and alternative methods of analyses. The recovery of acetone promoted both economic and environmental gains, with a recovery rate of 84.12%. The precision of the analyses was not observed in most of the determinations with reutilization of chemical waste in all the analytical methods tested, in spite of promoting decrease in cost, time invested in the preparation of solutions and the disposal of chemical waste.

Substrato e solução nutritiva desenvolvidos a partir de efluente de biodigestor para cultivo do meloeiro

Looking for the sustainability of a small farming enterprise, the present study focused the benefit of the biodigestor effluent resulting from the anaerobic fermentation of the bovine manure in a soilless melon plant experiment. The research was conducted in Jaboticabal, in the State of Sao Paulo, Brazil, at latitude of 21° 15' 22'' S and a longitude of 48° 18' 58'' W. The melon plant (Cucumis melo L. cv Bonus n° 2) was grown with substrate, seedling obtained in 10/2003. An experimental design was adapted in a randomized block with 16 treatments and 5 replications in a factorial 4 x 4 (4 substrates and 4 nutrient solutions). The 4 substrates were made up of different proportions in volume of the blend composition taking into consideration both the solid part of the biodigestor effluent and the washed raw sand. The 4 nutrient solutions were made up of the liquid part of the biodigestor effluent (biofertilizer) in substitution to the mineral water soluble fertilizers. The addition of the effluent in the sand led to a more rapid vegetative growth, a more precoceous crop with heavier fruits and a much better yield of melon crop. The mineral water soluble fertilizers used in the cultivation of plants in substrates can be partially replaced by the biofertilizer studied.

Optimization of acid hydrolysis from the hemicellulosic fraction of Eucalyptus grandis residue using response surface methodology

Biotechnological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically and with dilute or concentrate mineral acids. The present study used dilute sulfuric acid as a catalyst for hydrolysis of Eucalyptus grandis residue. The purpose of this paper was to optimize the hydrolysis process in a 1.41 pilot-scale reactor and investigate the effects of the acid concentration, temperature and residue/acid solution ratio on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). This study was based on a model composition corresponding to a 2 3 orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of residue. The considered optimum conditions were: H2SO4 concentration of 0.65%, temperature of 157 degrees C and residue/acid solution ratio of 1/8.6 with a reaction time of 20 min. Under these conditions, 79.6% of the total xylose was removed and the hydrolysate contained 1.65 g/l glucose, 13.65 g/l xylose, 1.55 g/l arabinose, 3.10 g/l acetic acid, 1.23 g/l furfural and 0.20 g/l 5-hydroxymethylfurfural. (c) 2006 Published by Elsevier Ltd.

Increase on incineration capacity and NOx control for air enrichment in the experimental simulation of aqueous residue incineration

An experimental investigation of air enrichment in a combustion chamber designed to incinerate aqueous residues is presented. Diesel fuel and liquefied petroleum gas (LPG) were used independently as fuels. An increase of 85% in the incineration capacity was obtained with nearly 50% O-2 in the oxidant gas, in comparison to incineration with air only. The incineration capacity continues increasing for enrichment levels above 50% O-2 , although at a lower pace. For complete oxy-flame combustion (100% O-2 ), the increase of the incineration capacity was about 110% relative to the starting conditions and about 13.5% relative to the condition with 50% O-2 . The CO concentration measured near the flame front decreases drastically with the increase of O-2 content in the oxidant gas. At the chamber exit, the CO concentration was always near zero, indicating that the chamber residence time was sufficient to complete fuel oxidation in any test setting. For diesel fuel, the NOx was entirely formed in the first region of the combustion chamber. For diesel fuel, there was some increase in the NOx concentration up to 35% of O-2 ; this increase became very sharp after that. From 60 ppm, at operation with air only, the NOx concentration raises to 200 ppm at 35% O-2 , and then to 2900 ppm at 74% O-2 . The latter corresponds to six times more NOx in terms of the ratio of mass of NO to mass of residue, compared to the situation of combustion with air only. For LPG, the NOx concentrations reached 4200 ppm at 80% O-2 , corresponding to nine times more, also in terms of the ratio of mass of NO to mass of residue, in comparison with combustion with air only. Results of different techniques used to control the NOx emission during air enrichment are discussed: (a) variation of the recirculated zone intensity, (b) increase of the spray Sauter mean diameter, (c) fuel staging, (d) oxidizer staging, and (e) ammonia injection. The present paper shows that NOx emission may be controlled without damage of the increase of incineration capacity by the enrichment and with low emission of partial oxidation pollutants such as CO.

Comportamento do meloeiro em cultivo sem solo com a utilização de biofertilizante

O reaproveitamento de nutrientes após a fermentação de resíduos orgânicos em biodigestor, associado à técnica do cultivo hidropônico, é uma alternativa para reduzir custos na agricultura, além de contribuir no menor consumo das reservas naturais de nutrientes do planeta. Com esse enfoque, estudou-se o comportamento da cultura do meloeiro usando a técnica hidropônica e efluente de biodigestor proveniente da fermentação anaeróbica de estrume bovino. Cultivou-se o meloeiro (Cucumis melo L. 'Bônus 2') em condições de ambiente protegido. O delineamento estatístico utilizado foi de blocos casualizados, com 4 tratamentos (cultivo hidropônico em sistema fechado tipo NFT com uso de solução nutritiva organo-mineral; cultivo hidropônico em sistema fechado tipo NFT com uso de solução nutritiva 100% mineral; cultivo em sistema aberto, com substrato e solução nutritiva organo-mineral e cultivo em sistema aberto, com substrato e solução nutritiva 100% mineral) e 6 repetições. Foram realizadas avaliações quanto a altura de plantas aos 50; 56; 63; 70 e 77 dias após a semeadura; tempo de colheita; peso de frutos e produtividade. As melhores respostas foram observadas no cultivo hidropônico em sistema fechado tipo NFT com uso de solução nutritiva 100% mineral. A substituição parcial de adubos minerais por biofertilizante, se mostrou viável para os tratamentos em sistema aberto (com substrato), constituindo-se em masi uma alternativa aos horticultores.

Nutrient recycling and physical indicators of an alley cropping system in a sandy loam soil in the pre-Amazon region of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultrasonic density measurement cell design and simulation of non-ideal effects

This paper presents a theoretical analysis of a density measurement cell using an unidimensional model composed by acoustic and electroacoustic transmission lines in order to simulate non-ideal effects. The model is implemented using matrix operations, and is used to design the cell considering its geometry, materials used in sensor assembly, range of liquid sample properties and signal analysis techniques. The sensor performance in non-ideal conditions is studied, considering the thicknesses of adhesive and metallization layers, and the effect of residue of liquid sample which can impregnate on the sample chamber surfaces. These layers are taken into account in the model, and their effects are compensated to reduce the error on density measurement. The results show the contribution of residue layer thickness to density error and its behavior when two signal analysis methods are used. (c) 2006 Elsevier B.V. All rights reserved.

Determination of the optimal quantity of crop residues for energy in sugarcane crop management using linear programming in variety selection and planting strategy

The aim of this work was to present organizational models for optimizing the reduction of crop residue generated by the sugarcane culture. The first model consisted of the selection of varieties of sugarcane to be planted meeting the mill requirements and, at the same time, to minimize the quantity of residue produced. The second model discussed the use of residue to produce energy. This is related to the selection of variety and quantity to be planted, in order to meet the requirements of the mill, to reduce the quantity of residue, and to maximize as much as possible the energy production. The use of linear programming was proposed. The two models presented similar results in this study, and both may be used to define the varieties and areas to be cultivated. (C) 2001 Published by Elsevier B.V. Ltd.

Validation of a mutant of the pore-forming toxin sticholysin-I for the construction of proteinase-activated immunotoxins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal behavior of residues (sludge) originated from Araraquara water and sewage treatment station

The number of the cities with canalized water and sewage treatment stations has increased lately and consequently having in mind the great concern on environment preservation and the quality of the water used by society. However, these stations are nowadays causing another kind of problem: a huge quantity of sludge as residue. Due to the implication of the residue on the environment and, consequently, to human life quality, performing of an accurate investigation about the components of such sludge, as well as the thermal stability of this residue in the environment become necessary. This paper presents a study on sludge from water and sewage treatment station, as well as the thermal characterization of residue. Such study was performed through FTIR, atomic absorption, thermoanalytical (TG/DTG, DTA) techniques, that made it possible to observe that the main components of the sludge are clay, carbonates and organic substance, presenting a low rate of metals and a unique thermal behavior since the sludge from the treatment station has a higher thermal stability.

Reuse of sand, crushed sugarcane and peanut hull-based substrates for cherry tomato cultivation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Use of chemically modified silica with beta-diketoamine groups for separation of alpha-lactoalbumin from bovine milk whey by affinity chromatography

Silica gel surface was chemically modified with beta-diketoamine groups by reacting the silanol from the silica surface with 3-aminopropyl-triethoxysilane and 3-bromopentanedione, With this material, copper ions were adsorbed from aqueous solutions, the chemical analysis of the silica-gel-immobilized acetylacetone provided a quantity of 0.67 mmol g(-1) of organic groups attached to the support and 0.63 mmol g(-1) of copper, This material was used as a stationary phase in IMAC (immobilized metal affinity chromatography), to separate alpha-lactoalbumin from bovine milk whey, the results showed an efficient separation in the chromatographic column, the possibility of reutilization of the stationary phase was also investigated. (C) 1997 Academic Press

Fate of Some New Fungicides (Cyprodinil, Fludioxonil, Pyrimethanil, and Tebuconazole) from Vine to Wine

The fate of four new fungicides (cyprodinil, fludioxonil, pyrimethanil, and tebuconazole) from the treatment on vine to the production of wine was studied. The influence of clarifying agents (bentonite, charcoal, potassium caseinate, gelatin, and polyvinylpolypyrrolidone) on residue concentrations in wine was also studied. The fungicide residues on grapes showed different decay rates after treatment, with first-order kinetics and half-lives ranging from 8 to 57 days. Grape processing into wine caused considerable residue reduction with cyprodinil (ca. 80%), fludioxonil (ca. 70%), and tebuconazole (ca. 50%) and no reduction with pyrimethanil. The two wine-making techniques employed (with and without maceration) had the same influence on the residue concentrations in wine, except for fludioxonil which showed maximum residue reduction with vinification with maceration. Among the clarifying agents tested, only charcoal showed effective action on the elimination of residue content in wine, proving complete elimination, or almost, of fungicide residues.

Inhibitory effects of jackbean (Canavalia ensiformis L.) leaf residues on germination and vigour of crops and weeds

The effects of jackbean leaf residues incorporated in the soil on germination and seedlings growth of cucumber, radish and some weeds was examined. Trials were carried out under greenhouse conditions to (a) determine the amount of incorporated residue that is inhibitory to two test plants, (b) to determine if decomposition time changes the inhibitory levels of jackbean residues on test plants and (c) to determine the amount of residue that is inhibitory to the weed species. Jackbean leaf residues incorporated in soil at concentration of 2% or higher and allowed to decompose for a period of 0 to 2 weeks before sowing, reduced the initial growth of cucumber and radish and at different concentrations, reduced germination and growth of three weed species. These results suggest the presence of allelopathic components in Jackbean leaves that could affect seed germination and seedling development.

Effect of intercropping on yields of corn with different relative maturities and Palisadegrass

Intercropping corn (Zea mays L.) with palisadegrass [Brachiaria brizantha (Hochst. ex A. Rich) Stapf] can result in high amounts of residue and improve nutrient cycling. Long-season corn hybrids will live longer, competing with palisadegrass, which may reduce both corn and forage biomass yields. This study, conducted in the state of São Paulo, Brazil, had the objective of evaluating nutrient concentration and yield of corn hybrids with different maturity ratings as affected by intercropped palisadegrass as well as forage dry matter production. Te experimental design was randomized blocks with a factorial arrangement of eight treatments consisting of two cropping systems (corn alone and intercropped with palisadegrass) and four corn hybrids (105-, 121-, 132, and 144-d relative maturity). Compared with corn grown alone, intercropping treatments resulted in corn grain yields of 107% (105-d hybrid) to 71.7% (144-d hybrid). In the corn-alone system, the 132- and 144-d corn hybrids provided the highest corn yields (9581 and 9606 kg ha-1, respectively). Corn yield was similar between the single-crop and intercrop systems when using 105-, 121-, and 132-d hybrids. Intercropping with the 144-d hybrid reduced forage production (6619 kg ha-1) and quality of palisadegrass (86 g kg-1 of crude protein) compared with the other hybrids. Te intercropping system with the 132-d hybrid allowed both the highest corn grain (8860 kg ha-1) and palisadegrass (8256 kg ha-1) yields. Therefore, intercropping palisadegrass with the earlier (105-, 121-, and 132-d) corn hybrids is a viable option for crop-livestock integration because it did not affect either corn or palisadegrass yield. © 2013 by the American Society of Agronomy, 5585 Guilford Road, Madison, WI 53711. All rights reserved.