Estudo comparativo das caracteristicas sensoriais do rum e da cachaça

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Teaching the Rational Use of Medicines to medical students: a qualitative research

Background: Prescribing is a complex and challenging task that must be part of a logical deductive process based on accurate and objective information and not an automated action, without critical thinking or a response to commercial pressure. The objectives of this study were 1) develop and implement a discipline based on the WHO's Guide to Good Prescribing; 2) evaluate the course acceptance by students; 3) assess the impact that the Rational Use of Medicines (RUM) knowledge had on the students habits of prescribing medication in the University Hospital.Methods: In 2003, the RUM principal, based in the WHO's Guide to Good Prescribing, was included in the official curriculum of the Botucatu School of Medicine, Brazil, to be taught over a total of 24 hours to students in the 4th year. We analyzed the students' feedback forms about content and teaching methodology filled out immediately after the end of the discipline from 2003 to 2010. In 2010, the use of RUM by past students in their medical practice was assessed through a qualitative approach by a questionnaire with closed-ended rank scaling questions distributed at random and a single semistructured interview for content analysis.Results: The discipline teaches future prescribers to use a logical deductive process, based on accurate and objective information, to adopt strict criteria (efficacy, safety, convenience and cost) on selecting drugs and to write a complete prescription. At the end of it, most students considered the discipline very good due to the opportunity to reflect on different actions involved in the prescribing process and liked the teaching methodology. However, former students report that although they are aware of the RUM concepts they cannot regularly use this knowledge in their daily practice because they are not stimulated or even allowed to do so by neither older residents nor senior medical staff.Conclusions: This discipline is useful to teach RUM to medical students who become aware of the importance of this subject, but the assimilation of the RUM principles in the institution seems to be a long-term process which requires the involvement of a greater number of the academic members.

Marginal leakage in Class V cavities pretreated with different laser energy densities

The purpose of the present study was to evaluate in vitro the degree of marginal leakage in Class V cavities involving the cementoenamel junction. Cavities were 4 rum wide and 2 mm deep. The specimens received dentin pretreatment (37% phosphoric acid) followed by the Single Bond (3M) adhesive system application. The 40 specimens were then divided into four groups: Group I (control); Group 2 (Nd:YAG laser at 120 mJ/pulse, frequency of 10 Hz, power of 1.2 W); Group 3 (Nd:YAG laser at 140 mJ/pulse, frequency of 10 Hz, power of 1.4 W); Group 4 (Nd:YAG laser at 160 mJ/pulse, frequency of 10 Hz, power of 1.6 W). The cavities were restored with Z100 composite resin (3M) and light cured at 300-600 mW/cm(2) light intensity. Specimens were thermocycled to 500 cycles from 2-50 degrees C. After that, they were dried and sealed with nail varnish, respecting 1 mm around the restorations, and immersed in 0.5% methylene blue solution for 4 h. After this period, the teeth were rinsed, dried, sectioned, and analyzed in a stereoscopic loupe. The highest leakage scores were considered for each specimen. The results were statistically analyzed by the analysis of variance (ANOVA) Kruskal-Wallis test to the 5% level. For both the enamel and cementum, there was a decrease in marginal leakage with the application of laser energy; no significant differences were observed for Groups 2, 3, and 4. The results also showed a smaller tendency to marginal leakage on the cementum than on the enamel.

Comparison of simulated periodontal bone defect depth measured in digital radiographs in dedicated and non-dedicated software systems

Objectives: To compare simulated periodontal bone defect depth measured in digital radiographs with dedicated and non-dedicated software systems and to compare the depth measurements from each program with the measurements in dry mandibles.Methods: Forty periodontal bone defects were created at the proximal area of the first premolar in dry pig mandibles. Measurements of the defects were performed with a periodontal probe in the dry mandible. Periapical digital radiographs of the defects were recorded using the Schick sensor in a standardized exposure setting. All images were read using a Schick dedicated software system (CDR DICOM for Windows v.3.5), and three commonly available non-dedicated software systems (Vix Win 2000 v.1.2; Adobe Photoshop 7.0 and Image Tool 3.0). The defects were measured three times in each image and a consensus was reached among three examiners using the four software systems. The difference between the radiographic measurements was analysed using analysis of variance (ANOVA) and by comparing the measurements from each software system with the dry mandibles measurements using Student's t-test.Results: the mean values of the bone defects measured in the radiographs were 5.07 rum, 5.06 rum, 5.01 mm and 5.11 mm for CDR Digital Image and Communication in Medicine (DICOM) for Windows, Vix Win, Adobe Photoshop, and Image Tool, respectively, and 6.67 mm for the dry mandible. The means of the measurements performed in the four software systems were not significantly different, ANOVA (P = 0.958). A significant underestimation of defect depth was obtained when we compared the mean depths from each software system with the dry mandible measurements (t-test; P congruent to 0.000).Conclusions: the periodontal bone defect measurements in dedicated and in three non-dedicated software systems were not significantly different, but they all underestimated the measurements when compared with the measurements obtained in the dry mandibles.

Morphological characterization of follicle deviation in Nelore (Bos indicus) heifers and cows

Follicle diameter deviation is defined as the beginning of the differential change in growth rates between the largest and next largest follicles subsequent to wave emergence and is considered a key component of follicle selection. Follicle selection has been extensively studied in European breeds of cattle (Bos taurus) but has not been critically studied in Zebu breeds (Bos indicus). The objectives of the present study were to determine and compare the morphological characteristics of deviation associated with the first post-ovulatory wave (Wave 1) of the estrous cycle in Nelore heifers (n = 8) and nonlactating cows (n = 11). Beginning on the day of ovulation (day 0), the three largest follicles (F1-F3, respectively) were individually tracked every 12 h for 6 d using transrectal ultrasonography. In individual animals, deviation was determined graphically using visual inspection of the diameter profiles of F1, F2 and sometimes F3 (observed deviation) and mathematically using segmented regression analysis of the diameter differences between F1 and F2 or sometimes F3 (calculated deviation). Mean day of emergence of Wave 1 when F1 reached >3 rum (approximately 1 d after ovulation) and growth rate of F1 during deviation (approximately 1.4 mm/d) were not significantly different between heifers and cows. The results of determining the beginning of deviation within heifers and cows using the observed and calculated methods were not significantly different. Averaged over both methods, diameter deviation occurred 2.8 d after ovulation when F1 reached 5.7 mm in heifers, and 2.4 d after ovulation when F1 reached 6.1 mm in cows. In conclusion, the emergence of Wave 1 and growth rates and diameters of the future dominant follicles at the beginning of deviation were similar in Nelore heifers and nonlactating cows, regardless of the methods used to determine deviation. Relative to Holstein cattle, emergence of Wave 1 appeared to occur about 1 d later and diameter of the future dominant follicle at the beginning of deviation was about 2 turn smaller in Nelore. (C) 2004 Elsevier B.V. All rights reserved.

Luminescence effect in amorphous PLT

Amorphous and crystalline powder of PLT phase was synthesized by using the Pechini method. Infrared (FTIR) analysis of the polymeric resin shows intense bands of organic materials from 250 to 1620 cm(-1). X-ray diffraction (XRD) and Raman spectra of calcined powder at different temperatures show amorphous phase at 450 degrees C/3 h, semi-crystalline phase at 550 degrees C/3 h and a crystalline phase at 800 degrees C/3 h. Luminescence effect was observed in amorphous powder calcined from 300 to 350 degrees/3 h with broad absorption peaks in 579 nm at 300 degrees C/3 h and 603 rum at 350 degrees C/3 h, respectively. The photoluminescence effect is attributed to emissions of Ti -> 0 directly from the oxygen 2p orbital (valence band) to the titanate 3d orbital (conduction bands). (c) 2004 Elsevier Ltd. All rights reserved.

Characterization and environmental interpretation of a floodplain Holocene paleosoil: Implications for paleohydrological reconstructions in the Upper Paraná River, Brazil

Alluvial paleosoil horizons from the 3 to 4 m high banks of the Paraná River were used to reconstruct the palaeoenvironmental history and palaeohydrological regime of the river. The bank consists of a Middle to Late Holocene sequence of sandy to silty clay layers of overbank deposits. The paleosoil horizon is located to a depth of 1.95 m from the top of the bank and is recognized as a guide horizon throughout the floodplain of the Upper Paraná River floodplain. Analyses of organic matter (δ13C and humic/fulvic acids), palynology (pollen and charcoal fragments), magnetic susceptibility, micromorphology, x-ray diffraction and 14C dating were conducted for samples from two representative profiles of the study area. Two phases were characterized in the history of the river: 1) An older phase, of stability in fluvial hydrology (stasis) with low frequency of floods, which produced conditions for soil development (14C 1700 ± 70 yr. BP). At this period, the predominance of herbaceous vegetation (determinated by pollen and δ13C analyses) suggests a climate less humid than the present one, and 2) A second phase, when climate changed to the present conditions of humidity (annual rain fall of 1600 rum) and characterized by the predominance of C3 plants. Under this new hydrological regime, the river developed an agradational floodplain, with a depositional sedimentary rate of 1.2 mm.y-1. © 2006 Gebrüder Borntraeger.

Bidestilação em alambiques contendo dispositivos de prata e cobre e sua influência na qualidade da cachaça

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Suplementação de anticorpos policlonais ou monensina sódica sobre comportamento ingestivo e desempenho de bovinos Brangus e Nelore confinados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Transferência de tecnologia e atividades de extensão universitária: análise do projeto de capacitação de pequenos produtores de cachaça do estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Processo de destilação para redução de contaminação por carbamato de etila em bebidas alcoólicas

Contamination of Brazilian sugar-cane rum by ethyl carbamate, a potentially carcinogenic substance, is considered an obstacle to export of the beverage. Copper is involved in ethyl-carbamate-formation reactions, and the replacement thereof by stainless steel in distillation equipment, with the aim of preventing the formation of said compound, results in a beverage of poor sensory quality owing to the presence of dimethyl sulphide. A reduction in the concentration of sulphurated compounds in the final product may be achieved by the placing of a copper device (Patent No. 8206688) inside the dome of a stainless-steel alembic. It is therefore appropriate to verify the efficiency of using other forms of catalysts that, in addition to reducing ethyl-carbamate levels, are able, likewise, to trigger other catalytic actions that allow the production of a distillate of good sensory quality. Silver is the noble metal most used in industry and, on account of the catalytic properties thereof, it is ideal for use as a catalyst in oxidation reactions. The subject matter of the present invention comprises a method involving the use of silver in the distillation of alcoholic beverages, such as sugar-cane rum, which reduces ethyl-carbamate contamination of the end-product.

Influência de diferentes misturas em tanque contendo o herbicida 2,4-D no espectro de gotas da aplicação

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Comportamento ingestivo de novilhas Nelore em pastejo recebendo suplemento a base de própolis ou monensina sódica

We evaluated the effect of additives the basis of propolis and monensin on ingestive behavior (grazing -GRA, rumination lying -RLY, rumination in foot -RFO, rumination -RUM; idleness lying -ILY, idleness in standing -IDS, idleness -IDL, walking -WAL, posture standing -POS, posture lying -PLY, intake of supplement and water -ISW) of heifers in Tifton 85 grazing. The treatments were: no additive (NAD); propolis - PRO (33.24 mg animal-1 of total flavonoid in apigenin), and monensin -MON (100 mg animal(-1)). Were used five heifers treatment(-1) for evaluation of ingestive behavior during 12 hours of total valuation, which was divided into three periods. Used a factorial design into 3 x 3 for evaluation of ingestive behavior as a function of the evaluation periods. Were utilized three paddocks of 2.9 acres of grass Tifton 85. The additives and mineral supplement (50 g animal(-1)) were provided with 200 g of corn meal to 17 hours. For all activities of the ingestive behaviors observed the effect of period on the time spent on of different activities. The activities of GRA and ISW were higher in the third period (15hours to 19hours) compared to the first period (7hours at 11hours). For IDL and PLY, there was a higher time in minutes for heifers treatment with PRO in the period of 7hours at 11hours, compared to other treatments (NAD and MON). Thus, it is concluded that the use of the additive based on propolis enables sodium monensin replacement, to heifers maintained on pasture without changing eating behavior as well as providing greater idleness during the day the without affecting animal performance.

Resistência de união e microinfiltração em restaurações de resina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioprospecção de leveduras fermentadoras de xilose visando a produção de etanol a partir de bagaço de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)