Distribuição da carga hidráulica em linhas de derivação otimizadas por programação linear

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Beta-carotene supplementation attenuates cardiac remodeling induced by one-month tobacco-smoke exposure in rats

Objective: the objectives were to analyze the cardiac effects of exposure to tobacco smoke (ETS), for a period of 30 days, alone and in combination with beta-carotene supplementation (BC). Research methods and procedures: Rats were allocated into: Air (control, n = 13); Air + BC (n = 11); ETS (n = 11); and BC + ETS (n = 9). In Air + BC and BC + ETS, 500 mg of BC were added to the diet. After three months of randomization, cardiac structure and function were assessed by echocardiogram. After that, animals were euthanized and morphological data were analyzed post-morten. One-way and two-way ANOVA were used to assess the effects of ETS, BC and the interaction between ETS and BC on the variables. Results: ETS presented smaller cardiac output (0.087 +/- 0.001 vs. 0.105 +/- 0.004 l/min; p = 0.007), higher left ventricular diastolic diameter (19.6 +/- 0.5 vs. 18.0 +/- 0.5 mm/kg; p = 0.024), higher left ventricular (2.02 +/- 0.05 vs. 1.70 +/- 0.03 g/kg; p < 0.001) and atrium (0.24 +/- 0.01 vs. 0.19 +/- 0.01 g/kg; p = 0.003) weight, adjusted to body weight of animals, and higher values of hepatic lipid hydroperoxide (5.32 +/- 0.1 vs. 4.84 +/- 0.1 nmol/g tissue; p = 0.031) than Air. However, considering those variables, there were no differences between Air and BC + ETS (0.099 +/- 0.004 l/min; 19.0 +/- 0.5 mm/kg; 1.83 +/- 0.04 g/kg; 0.19 +/- 0.01 g/kg; 4.88 +/- 0.1 nmol/g tissue, respectively; p > 0.05). Ultrastructural alterations were found in ETS: disorganization or loss of myofilaments, plasmatic membrane infolding, sarcoplasm reticulum dilatation, polymorphic mitochondria with swelling and decreased cristae. In BC + ETS, most fibers showed normal morphological aspects. Conclusion: One-month tobacco-smoke exposure induces functional and morphological cardiac alterations and BC supplementation attenuates this ventricular remodeling process.

Validity of hand-to-foot measurement of bioimpedance: Standing compared with lying position

Objective: To assess the reliability of the standing measurement of hand-to-foot bioimpedance compared with measurements made in the lying position.Research Methods and Procedures: In 205 volunteers 6 to 89 years of age, 111 males and 94 females from six ethnic groups, effects of posture, time, and age on hand-to-foot resistance were studied over a range of body size. The effect of time in a position on resistance was also recorded in a small subset (n = 10), and repeat measurements over 3 days at the same time of the day were recorded in another subset (n = 12).Results: Lying impedance was consistently higher than standing, with the relationship (resistance lying/resistance standing) for the children (5 to 14 years) being 1.031, progressing to a ratio of 1.016 in those >60 years. The time spent static in either position did change resistance measurements - a decrease of up to 9 Omega (mean 5 Omega, 1.0%) over 10 minutes of standing and an increase of up to 7 Omega (mean 3 Omega, 0.7%) with lying.Discussion: In the field, measurements of hand-to-foot bioimpedance can be made in the standing position, and, with appropriate adjustment, previously validated recumbent equations can be used. Given that errors in the measurement of height and weight also affect the reliability of the derivation of body fat from bioelectrical conductance, the errors that may arise from a more practical standing measurement rather than lying are minimal.

EthoSeq: A tool for phylogenetic analysis and data mining in behavioral sequences

This article introduces the software program called EthoSeq, which is designed to extract probabilistic behavioral sequences (tree-generated sequences, or TGSs) from observational data and to prepare a TGS-species matrix for phylogenetic analysis. The program uses Graph Theory algorithms to automatically detect behavioral patterns within the observational sessions. It includes filtering tools to adjust the search procedure to user-specified statistical needs. Preliminary analyses of data sets, such as grooming sequences in birds and foraging tactics in spiders, uncover a large number of TGSs which together yield single phylogenetic trees. An example of the use of the program is our analysis of felid grooming sequences, in which we have obtained 1,386 felid grooming TGSs for seven species, resulting in a single phylogeny. These results show that behavior is definitely useful in phylogenetic analysis. EthoSeq simplifies and automates such analyses, uncovers much of the hidden patterns of long behavioral sequences, and prepares this data for further analysis with standard phylogenetic programs. We hope it will encourage many empirical studies on the evolution of behavior.

Analysis of inventory management in small business auto parts

The objective of this study was to analyze the production process and supply control in order to identify possible gaps and develop a method for managing supplies. The relevance of this research is on the benefits that can obtain by identifying the problems of supply control. The research method used was the case study, which was grounded on tripod semi-structured interviews, on-site observation, and document analysis. This methodology was very suitable because it can be analyzed and cross checked. The possibility of implementation of the proposal obtained from the theoretical framework, that together with the complementary actions suggested here, offers the opportunity to make the process more productive and profitable. This work allowed one to observe the weaknesses in managing the supply chain and at what points to work should be improved. It allowed to use some scientific models in the company object of study in order to improve supply management. © 2011 IEEE.

The infuence of production systems in postponement make-to-stock compagny in the graphic industry

The supply chain management, postponement and demand management operations are of strategic importance to the economic success of organizations because they directly influence the production process. The aim of this paper is to analyze the influence of the postponement in an enterprise production system with make-to-stock and with seasonal demand. The research method used was a case study, the instruments of data collection were semi-structured interviews, document analysis and site visits. The research is based on the following issues: Demand Management which can be understood as a practice that allows you to manage and coordinate the supply chain in reverse, in which consumers trigger actions for the delivery of products. The Supply Chain Management is able to allow the addition of value, exceeding the expectations of consumers, developing a relationship with suppliers and customer's win-win. The Postponement strategy must fit the characteristics of markets that require variety of customized products and services, lower cost and higher quality, aiming to support decision making. The production system make-to-stock shows enough interest to organizations that are operating in markets with high demand variability. © 2011 IEEE.

Risk management in software projects through Knowledge Management techniques: Cases in Brazilian Incubated Technology-Based Firms

In businesses such as the software industry, which uses knowledge as a resource, activities are knowledge intensive, requiring constant adoption of new technologies and practices. Another feature of this environment is that the industry is particularly susceptible to failure; with this in mind, the objective of this research is to analyze the integration of Knowledge Management techniques into the activity of risk management as it applies to software development projects of micro and small Brazilian incubated technology-based firms. Research methods chosen were the Multiple Case Study. The main risk factor for managers and developers is that scope or goals are often unclear or misinterpreted. For risk management, firms have found that Knowledge Management techniques of conversion combination would be the most applicable for use; however, those most commonly used refer to the conversion mode as internalization.. © 2013 Elsevier Ltd. APM and IPMA.

Green supply chain management: Mapping the territory

The objective of this paper is to identify the main definitions, related practices and to point out future directions in green supply chain management (GSCM). After a literature review and systematisation of the published articles in this field, it was possible to identify: a) the main research objectives of analysed papers; b) the research methods adopted; c) the predominantly analysed industrial sectors; d) the GSCM practices considered by the researchers. Results are presented in each of these analytical perspectives. The main findings are: 1) there are various classifications, nomenclatures and types of GSCM practices, but the most commonly used by studies in GSCM are cleaner production, product design, reverse logistic and green purchasing; 2) from the highlighted definitions, the tonic is to adapt operating activities and incorporate the supply chain management philosophy (integration/ collaboration) to environmental concerns (impact reduction) in relations between links in the chain. These results can be useful for those interested in environmental management as well as supply chain management, considering the growing interest in GSCM. We also propose a research agenda on this subject. This is one of the most recent literature review and systematisation on green supply chain management. © 2013 Inderscience Enterprises Ltd.

Knowledge-based risk management: Survey on Brazilian software development enterprises

A risks management, carried on in an effective way, leads the software development to success and may influence on the organization. The knowledge takes part of such a process as a way to help taking decisions. This research aimed to analyze the use of Knowledge Management techniques to the Risk Management in software projects development and the possible influence on the enterprise revenue. It had, as its main studying subject, Brazilian incubated and graduated software developing enterprises. The chosen research method was the Survey type. Multivariate statistical methods were used for the treatment and analysis of the obtained results, this way identifying the most significant factors, that is, enterprise's achievement constraining factors and those outcome achievement ones. Among the latter we highlight the knowledge methodology, the time of existence of the enterprise, the amount of employees and the knowledge externalization. The results encourage contributing actions to the increasing of financial revenue. © 2013 Springer-Verlag.

Movimento das pesquisas que relacionam as tecnologias de informação e de comunicação e a formação, a prática e os modos de pensar de professores que ensinam matemática

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

De homens e caranguejos ao caranguejos com cérebro: a região cultural do movimento Manguebit e o Recife contemporâneo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da relação entre disfunções temporomandibulares e prevalência de depressão psicológica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A fragilidade da postura democrática: atitudes e valores em estudo de caso em Americana - SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Memória organizacional e a constituição de bases de conhecimento

Pós-graduação em Ciência da Informação - FFC

Construindo indicadores para a paisagem do Parque Estadual da Serra do Mar - Núcleo Santa Virgínia

Pós-graduação em Geografia - IGCE