Aspects of the activity rhythm and population size of troglophilic mygalomorph spiders (Trechona sp., Dipluridae) in a quartzite cave in Minas Gerais, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Middle Proterozoic vein-hosted gold deposits in the Pontes e Lacerda region, southwestern Amazonian craton, Brazil

Structural, geochemical, and isotope studies were carried out on the gold deposits of the Pontes e Lacerda region (Mato Grosso state, Brazil), where rocks of the Aguapei and Rondoniano mobile belts (southwestern Amazonian craton) occur. The orebodies are hosted in metavolcanic, gneiss-granite, quartzite, tonalite, and granite units. Tectonics involve oblique overthrusting (from northeast to southwest), which led to the formation of recumbent folds and thrusts (pathways for the mineralizing fluids), upright folds, and faults with dominant strike-slip component. These unconformities represent potential sites for mineralization. During geological mapping, it was observed that the orebodies consist of quartz, pyrite, and gold, and that the hydrothermal alteration zone contains quartz, sericite, pyrite (altered to limonite), and magnetite (altered to hematite). Chalcopyrite, galena, and sphalerite occur only in the Onça deposit. Chemical analysis of sulfides indicates high contents of Bi, Se, and Te in sulfides and gold, suggesting plutonic involvement in the origin of hydrothermal solutions. K-Ar dating of hydrothermal sericites from gold veins yielded ages in the range from 960 to 840 Ma, which may indicate the age of original crystallization of sericite. Pb-Pb dating in galenas yielded model ages in the range from 1000 to 800 Ma for the Onça deposit, which is in agreement with K-Ar ages. Pb-isotopic ratios indicate high U/Pb and low Th/Pb for the upper-crustal Pb source before incorporation in galena crystals. The Pontes e Lacerda gold deposits yielded ages correlated to the Aguapei event and probably were formed during a Proterozoic contractional tectonic period in the southwestern part of the Amazon craton, which may characterize an important metallogenic epoch in the Pontes e Lacerda region.

Sm-Nd system in total rock open versus closed isotopic composition in zones of high deformation

High strain shear zones of Brasiliano age, developed in Paleoproterozoic basement gneiss of the Caicó region, Borborema Province, NE Brazil, were associated with medium- to low-grade metamorphism and deformational processes that transformed porphyritic augen gneiss into muscovite quartzite, modifying their original mineralogy and chemical properties. During the last hydrothermal event mobility of major, minor and trace elements was great, whereas the pattern of Rare Earth Elements was not changed. We carried out a Sm-Nd isotopic study in these rocks in order to understand the behavior of Nd isotopes during mylonite generation. TDM model ages at around 2.6 Ga and εNd (t) values for both protolith and transformed rock suggest that the Nd isotopic system remained closed, recording the original source rock signature, despite undergoing two superposed metamorphic events. These new Sm-Nd results provide important information on the geologic evolution of basement rocks in the central Rio Grande do Norte Terrane of the Borborema Province, NE Brazil.

Nova contribuiçao ao conhecimento da formação Rio Claro (T) na Folha Rio Claro (SP)

The Rio Claro Formation mainly occurs in the county of Rio Claro (SP) lying unconformably on Paleozoic and Mesozoic rocks. Its thickness is 30-40 m. It shows fine to coarse, regular to poor sorted, Triable sandstones and conglomerates with quartzite and quartz clasts in the base. Thin layers of mudstone occur interbeded. Stratigraphic maps had been elaborated in recent analyses allowing to improve the knowledge about the formation. The biggest thicknesses occur on the east part of the studied area. The coarse/fine clastic ratio map demonstrates that fine sediments are concentrated in the east side, and suggests the existence of barriers which conditioned perennial water body (or bodies) where decantation took place (east, south and southeast sides). The structural contour map of the Rio Claro Formation base indicates a NW/SE trough which was the main depositional axis. The integrated analysis demonstrates that the formation is formed by lacustrine, fluvial and debris flows deposits whose source area was located on NW side, with coalescent alluvial fans from where braided to psamitic meandering fluvial channels came. The location of the source area suggests no link with the Corumbataf River paleo-terraces.

Geologia e Caracterização Tecnológica do Minério de Manganês da Mina Córrego do Cocho, Itapira (SP)

The objects of this study are three manganese ore deposits and one mine derived from lateritic weathering of gondites (spessartine quartzites). These deposits are associated with Mn-rich garnet metasediments of the Itapira Group (Paleoproterozoic) and the reserves were estimated at approximately 2.0 × 10 6 tons with an average grade of 23% MnO 2. The ore minerals are cryptomelane, pyrolusite, lithiophorite, spessartine and psilomelane. Several crystal shapes and textural characteristics were identifi ed in this study, which are related to the degree of liberation, as confi rmed by heavy media separation method. In this study, we determined the main characteristics of the liberation of manganese, which is concentrated in the fi ne grain-size fraction and is lost during ore dressing. Therefore, the low average content of MnO 2 (28%) is due to this loss, whereas at grain size of minus 0.074 mm, contents near 40% MnO 2 were observed. This suggests that the ore can be used for manufacturing manganese sulphate fertilizers. A comparative study with the ore deposits located at Ouro Fino (MG), mainly with the Caneleiras mine, showed that higher degree of liberation occurs in the coarse grain-size fractions (0.84 to 0.074 mm with MnO 2 content of 38%). As a consequence, the ore can be used for manufacturing Fe-Si-Mn alloys.

Bambuina bambui: A new genus and species of cave cricket from brazil (orthoptera: Grylloidea: Phalangopsidae: Luzarinae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização geoambiental como subsídio ao planejamento urbano e turístico em Amparo (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

As formações ferríferas bandadas de Piumhi: geologia, petrografia e caracterização tecnológica

Pós-graduação em Geologia Regional - IGCE

Emanação de radônio em rochas ornamentais e para revestimento do estado do Ceará, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evolução metamórfica P-T-t da porção norte do complexo Guaxupé na região de Arceburgo - Santa Cruz da Prata, MG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

ASPECTOS GEOLÓGICOS, PETROGRÁFICOS E QUÍMICOS DE INTERESSE PARA O APROVEITAMENTO ECONÔMICO DOS QUARTZITOS FOLIADOS DE SÃO THOMÉ DAS LETRAS – MINAS GERAIS

A região de São Thomé das Letras constitui o maior centro brasileiro de lavra de quartzitos foliados, com produção atual estimada em 250.000 t/ano. O baixo índice de recuperação decorrente das atividades de lavra destes quartzitos, estimada como inferiores a 20% do total extraído, estariam gerando cerca de 1.250.000 t/ano de rejeitos, o que tem se traduzido em grandes pilhas de bota-fora com evidentes desdobramentos ambientais indesejáveis. Objetivando a adequação ambiental da lavra, a Fundação Estadual do Meio Ambiente de Minas Gerais - FEAM iniciou, a partir do ano de 1993, trabalhos de fiscalização e orientação da atividade extrativa de quartzitos no Município de São Thomé das Letras. A partir de 1996, esses trabalhos foram ampliados através do Projeto Minas Ambiente - Mineração de Pedra São Tomé que, sob a coordenação da FEAM, promoveu estudos para disposição controlada e aproveitamento econômico de resíduos, revegetação das pilhas de bota-fora e técnicas menos impactantes de desmonte na lavra. Neste contexto, os estudos geológicos, petrográficos e químicos ora realizados visam contribuir com aspectos de interesse para as atividades extrativas e de aproveitamento industrial dos rejeitos da lavra e do beneficiamento dos quartzitos foliados São Tomé. Trabalhos desenvolvidos no âmbito do Projeto Minas Ambiente e, mais recentemente, pela Universidade Vale do Rio Verde de Três Corações demonstraram a viabilidade técnica de utilização dos quartzitos para elaboração de tijolos prensados e autoclavados. Algumas variedades de quartzitos também estão sendo aproveitadas na produção de vidrados e esmaltes cerâmicos, inclusive com vantagens técnicas e econômicas bastante competitivas sobre matérias-primas oriundas de sedimentos aluvionares. Outros usos para os quartzitos moídos, como carga mineral, material filtrante e argamassas em geral, estão em fase de estudos pelos mineradores e deverão ser brevemente viabilizados, o que permite vislumbrar, pelo menos a médio prazo, um expressivo incremento dos usos industriais para os quartzitos São Tomé. Palavras-chave: rocha ornamental; rocha de revestimento; quartzito laminado; recuperação de rejeito; quartzito São Tomé.

Geologia de uma área na porção centro leste da folha Cássia (1:50.000), MG

This study aimed the geological characterization at scale 1:50.000 of an area belonging to the southern sector of the Brasilia Belt, located in the western portion of the Passos Nappe, near the town of Cássia, MG. In this region, outcrops rock types belonging to Araxá Group, composed of metasediments associated with metavolcanics which form a tectonometamorphic terrain of great importance for understanding the geological evolution of southeast and midwest regions of Brazil. With the development of work was possible to group the rocks in 10 lithostratigraphic units and had been identified 3 different zones of metamorphism generated during the peak metamorphism. The structural pattern of the area shows that the main foliation has average dip 30 ° NW and mineral lineation parallel to the stretching direction with 290 °. Still, we can conf irm that this inverse gradient metamorphic rocks of the Passos Nappe, described by several authors. Also, were seen lithotypes of economic interest, some already in exploitation, such as clay and sand, and other mineral commodities, which are occurring and can be used: quartz, quartzite, garnet, kyanite, rutile and zircon.

Geologia da região da Fazenda Salobo, Vazante - MG

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Erosion rates and landscape evolution of the lowlands of the Upper Paraguay river basin (Brazil) from cosmogenic Be-10

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Anatomia de espécies brasileiras de Eriocaulaceae: Comanthera e Syngonanthus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)