Infecção experimental em suínos jovens com Leptospira interrogans sorovar wolffi: determinação de parâmetros bioquímicos

Um estudo sobre infecção experimental foi realizado em oito suínos, com idade média de 90 dias, machos castrados, da raça Wessex, e distribuídos em dois grupos de quatro suínos cada. Durante 36 dias, foram analisadas as alterações bioquímicas nos soros dos suínos dos dois grupos. O Grupo I foi mantido como testemunho e recebeu 5,0mL de solução fisiológica estéril por via intravenosa (veia cava craniana) e, no Grupo II, os suínos foram inoculados pela mesma via com 5,0mL de cultura de Leptospira interrogans sorovar wolffi , amostra L-10 selvagem isolada de tatu (Dasypus novemcinctus), contendo 1,0 x 10(8) leptospiras/mL. A partir do terceiro dia após a inoculação e em intervalos de 72 horas até o décimo oitavo dia, foram feitas coletas de sangue, sem anticoagulante, dos animais inoculados e testemunhas. Os parâmetros bioquímicos analisados foram: bilirrubina total, direta e indireta, ácidos graxos, glicose e proteínas plasmáticas. Foi detectado um aumento da bilirrubina direta no terceiro dia e um aumento no sexto dia da bilirrubina total e indireta após a inoculação. As dosagens de glicose, ácidos graxos e proteínas plasmáticas apresentaram uma diminuição a partir do terceiro dia da inoculação. Com os resultados obtidos, pode-se concluir que o aumento das taxas de bilirrubinas levam a uma definição de um diagnóstico de hemólise aguda, e que a hipoglicemia, a hipolipidemia e a hipoproteinemia podem estar relacionadas com lesões hepáticas e a uma septcemia.Todas as dosagens em todos os animais retornaram aos seus valores normais a partir do décimo quinto dia.

The improvement in grinding of inlet engine valves by the adoption of the most effective cuting fluid type

In this paper is presented an experimental research in which the grinding of seating surfaces of inlet engine valves was improved by the adoption of the most effective cutting fluid type, matching the new requirements of cutting fluid application. Four different types of cutting fluids (straight oil and three different types of soluble oils) were analyzed. As qualitative and quantitative evaluation parameters of the performance of the cutting fluids, the roughness, the grinding wheel wear, the cutting force and the workpiece residual stress were determined. As a conclusion, the straight oil was the cutting fluid that presented the best results in all of the parameters analyzed. Copyright © 2000 Society of Automotive Engineers, Inc.

Adsorsão e coeficientes de distribuição de selênio em solos do Estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variações nos níveis de elementos minerais após aplicações de 2,4-D em progênies de Eucalyptus grandis

Pós-graduação em Ciência Florestal - FCA

Variabilidade genética em progênies de guapuruvu Schizolobium parahyba (Vell.) Blake

Pós-graduação em Ciência Florestal - FCA

Variabilidade genética em progênies de polinização aberta de Eucalyptus urophylla

Pós-graduação em Ciência Florestal - FCA

Screening da atividade antiproliferativa e investigação toxicológica in vitro e in vivo de compostos de coordenação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimative of genetic parameters in progeny test of Pinus caribaea Morelet var. hondurensis Barret & Golfari by quantitative traits and microsatellite markers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A quantitative nature of somatic embryogenesis in soybean

The objectives of this research were to investigate the genetic parameters associated with the in vitro formation of somatic embryos in soybean and to determine the effect of light intensity on the embryogenic capability of F-1, F-2, and backcross (RC1P1 and RC1P2) progenies derived from crosses between embryogenic (IAS-5 and Embrapa-1) and nonembryogenic (Parana) cultivars. Immature cotyledons (4-6 mm in length) derived from the parental lines, F-1, F-2, RC1P1, and RC1P2 were grown for 90 d on the inductive N10 medium, after which the number of somatic embryos was recorded. Chi-square tests for goodness of fit showed that the genetic component of the somatic embryogenesis trait is controlled in a quantitative manner by approximately 10 genes. A normal distribution for somatic embryo formation in the F-2 generations was observed reinforcing the quantitative nature of the trait. Variation in light intensity (8-12 and 27-33 mu mol m(-2) s(-1)) had no effect on somatic embryo formation in the parental material tested.

Analytical Validation of Quantitative High-Performance Liquid Chromatographic Methods in Pharmaceutical Analysis: A Practical Approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantitative microscopy characterization of hydrous niobium phosphate into bleached cellulose

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantitative variation in the tropical maize population, ESALQ-PB1

A boa produtividade e os valores intermediários para altura da planta e altura da espiga caracterizam a população de milho ESALQ-PB1 como agronomicamente promissora. São relatadas estimativas de parâmetros para 13 caracteres: altura da planta (PH), altura da espiga (EH), posição relativa da espiga (EP), comprimento do pendão (TL), peso do pendão (TW), número de ramificações do pendão (TB), peso de espigas (EW), peso de grãos (GW), comprimento da espiga (EL), diâmetro da espiga (ED), número de fileiras de grãos (RN), número de grãos por fileira (KR) e prolificidade (PR). Os resultados se referem a um único ambiente (um local e um ano). Foi detectada variação genética para todos os caracteres, e são apresentadas estimativas da variância genética aditiva. Os coeficientes de herdabilidade (indivíduos) variaram de 0,14 a 0,72 e foram considerados altos para PH, EH e TB; intermediários para EP, TL, TW, EL e ED, e baixos para EW, GW, KR e PR. O coeficiente de herdabilidade para médias de progênies mostrou aproximadamente a mesma tendência, variando de 0,40 a 0,75. O maior ganho esperado por seleção foi para TB (27% por ciclo) sob seleção massal e para TW (16,4%) por seleção entre progênies; o menor ganho esperado foi para ED, tanto por seleção massal (1,9%) como por seleção entre progênies (2,9%). Coeficientes de correlação aditiva (rA) 0.5

Strong and fast phase modulation for quantitative analysis of photorefractive gratings

A new approach for studying photorefractive gratings in two-wave mixing experiments by a phase modulation technique is presented. The introduction of a large-amplitude, high-frequency sinusoidal phase modulation in one of the input beams blurs the interference pattern and provides powerful harmonic signals for accurate measurements of the grating diffraction efficiency eta and the output phase shift rho between the transmitted and diffracted waves. The blurring of the light fringes can be used to suppress the higher spatial harmonics of the grating, allowing a space-charge field with sinusoidal profile to be recorded. Although the presence of such a strong phase modulation affects the beam coupling in a rather complicated way, it is shown that for the special case of equal intensity input beams, the effect of the phase modulation on eta and rho is reduced to a weakening of the coupling strength. The potentialities of the technique are illustrated in a study of refractive-index waves excited by running interference patterns in a Bi12TiO20 crystal. Expressions for the diffraction efficiency and the output phase shift are derived and used to match numerically calculated curves to the experimental data. The theoretical model is supported by the very good data fitting and allows the computation of important material parameters.

Calcaneal apophysitis: a quantitative radiographic evaluation of the secondary ossification center

Background: Calcaneal apophysitis in children is a self-limited condition that may interfere with walking and physical performance in sports, thus causing concern to the patient and parents. There is still controversy about the significance of the radiographic changes in children with heel pain, since the report of Sever in 1912. One of the reasons is that normal children may display a considerable variation in the radiographic aspects of the secondary ossification center of the calcaneus at different ages. Methods: In this investigation, the developmental aspects of primary and secondary ossification centers of the calcaneus were studied in radiographs obtained from healthy boys and from boys with calcaneal apophysitis. The normal population comprised 392 children and adolescents ranging in age from 6 to 15 years. There were 69 individuals with calcaneal apophysitis ranging in age from 8 to 14 years. Lateral standard radiographs were obtained of both heels, and a copper step wedge was used as a calibration to determine bone density. The following parameters were analyzed on the plain films: time of appearance, fusion and number of fragments of the secondary nucleus, area and bone densitometry of the primary and secondary ossification centers of the calcaneus. Results: In the normal population, the ossification of the secondary nucleus began at 7 years of age, and at 15 years of age, the nucleus was fused in all individuals. In the apophysitis group, the secondary ossification center was present and not fused in all individuals. Both secondary nuclei increased in size with age with no difference between the two groups. Regarding bone density, both the primary and secondary nuclei were less dense in the apophysitis group than their counterparts in the normal population. The most significant difference between the two populations referred to the degree of fragmentation, which was greater in the apophysitis group. Conclusion: Our data showed that the sclerotic aspect of the secondary nucleus of the calcaneus is a normal feature and, therefore, should not be used to establish the diagnosis of Sever's disease. The most consistent difference between the normal and apophysitis group was related to the more fragmented aspect of the secondary nucleus in the latter individuals, which may suggest a mechanical etiology for that condition.

Dielectric thermal analysis as a tool for quantitative-evaluation of the viscosity and the kinetics of epoxy resin cure

Dielectric thermal analysis has been proved as a valuable tool for monitoring the epoxy curing process and the related rheological properties in the fabrication of polymer-matrix composite materials. This technique also has the potential to be applied in the monitoring of magnet impregnation processes as well as in quality control. In this work we present the quantitative evaluation of the viscosity changing and the curing kinetics for a commercial Stycast epoxy resin system at different temperatures through the impedance analysis. The results showed correlation between the real component of the complex impedance and the isothermal reaction extent. Comparing the dielectric analysis result with the viscosity measured by rotational rheometer we observed a similar behavior reported for dynamic mechanic analysis. The results comparison have shown that the kinetics parameters obtained from DSC and DETA analysis showed different sensitivities related to the characteristics of curing stages. We concluded that the dielectric thermal analysis should be applied in quantitative evaluation of cure kinetics.