Consumer attitude towards purchasing intent for ready to drink orange juice and nectar

Purpose: The purpose of this paper was to evaluate the impact of some labeling aspects on the consumer intent to purchase ready to drink orange juice and nectar. Design/methodology/approach: The influence of label information on the consumer intent to purchase was evaluated by conjoint analysis using a convenience sample (n=149). A factorial design with four characteristics, price, brand, information about the product and kind of beverage, was used. Three levels were established for brand and product information, and two for price and kind of beverage. Findings: Low price, product information and market leading brand had positive impact. No preservatives/natural was the information that most influenced consumer's purchase intent. The ideal label showed the leading brand, low price and information no preservatives/natural. These results could be useful for strategic planning of consumer instruction and have important implications for Brazilian orange juice manufactures. Originality/value: Although the most widely consumed beverages in Brazil are ready to drink orange juice and nectar, it was unexpected that consumers did not know the differences between them and that kind of beverage was not an important factor for the purchase decision. © Emerald Group Publishing Limited.

Are supplier selection criteria going green? Case studies of companies in Brazil

Purpose - The purpose of this paper is to verify if Brazilian companies are adopting environmental requirements in the supplier selection process. Further, this paper intends to analyze whether there is a relation between the level of environmental management maturity and the inclusion of environmental criteria in the companies' selection of suppliers.Design/methodology/approach - A review of mainstream literature on environmental management, traditional criteria in the supplier selection process and the incorporation of environmental requirements in this context. The empirical study's strategy is based on five Brazilian case studies with industrial companies. Face-to-face interviews and informal conversations are to be held, explanations made by e-mail with representatives from the purchasing, environmental management, logistics and other areas, and observation and the collection of company documents are also employed.Findings - Based on the cases, it is concluded that companies still use traditional criteria to select suppliers, such as quality and cost, and do not adopt environmental requirements in the supplier selection process in a uniform manner. Evidence found shows that the level of environmental management maturity influences the depth with which companies adopt environmental criteria when selecting suppliers. Thus, a company with more advanced environmental management adopts more formal procedures for selecting environmentally appropriate suppliers than others.Originality/value - This is the first known study to verify if Brazilian companies are adopting environmental requirements in the supplier selection process.

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

Study of the timber constructive systems that are more commercialized in Brazil

The Brazilian houses in wood are executed with several techniques and species, in function of the areas they are located, therefore, it is treated of regional traditional houses, built practically without modem technological resources. These houses are the ones of the tropical areas, where there is abundance of this material, or the ones of the south region, prevailing the European immigrant's constructive techniques. Nowadays, in the urbanized centers of the country it is observed that this type of house can be found sheltering the most lacking populations, in the slums; or in highly sophisticated residential units which are conceived and executed by specialist professionals for a social class of high purchasing power; or still, those that are marketed by companies of small load, that offer standardized residences, usually acquired by the middle class as second residence, in the field or in the coast. The work has for objective to study the houses of these companies that are consolidated at the market, identifying the constructive system, the product; as well as, its production process, trying to verify which technologies are incorporated to these processes. The analysis that was made allows a larger understanding of the product, wood house, that exists in the market and identification of the technological degree in the productive process of those constructive systems.

Desafios e dificuldades do financiamento em saúde bucal: uma análise qualitativa

Os princípios de universalidade, integralidade e eqüidade do SUS só podem ser viabilizados com a construção de um modelo de financiamento flexível e transparente que permita o controle social e ofereça a agilidade no uso dos recursos. Este artigo analisa as dificuldades e desafios do financiamento da saúde bucal na ótica de gestores e técnicos da área. A coleta de dados ocorreu por meio de entrevistas, queforam gravadas e transcritas para análise qualitativa, preconizada por Bardin. As dificuldades relatadas pelos entrevistados foram expressas em frases como: Procuro cumprir a agenda, porém muita coisa não consegui devido à falta de recursos, não se sabe o quanto pode gastar, escassez de recursos para procedimentos de média e grande complexidades, falta de recurso para troca de equipamento e prioridade para compra de materiais. No que tange aos desafios foi relatada a necessidade de capacitação, formação e organização dos recursos humanos em saúde pública. Observa-se a dificuldade na realização completa do plano previsto de gestão, assim como a necessidade de compromisso por parte dos gestores em acompanhar as etapas de todo processo de repasse financeiro e aplicação do mesmo.

Recycling potential of urban solid waste destined for sanitary landfills: the case of Indaiatuba, SP, Brazil

The urban solid waste of the city of Indaiatuba (pop. 175 000), located in the state of São Paulo, was characterized, focusing on the recycling potential. For this purpose, collected waste was subdivided into 27 items, classified by mass and volume. About 90% of this waste was found to be potentially recyclable and only 10% requiring landfilling. The compostable organic matter, in the form of food and garden waste, both with high moisture content (51 and 41%, respectively), represents 54% in mass and 21% in volume. The most common type of plastic in this waste is high density polyethylene, whose estimated disposal is about 5000 kg day(-1). A socio-economic analysis of the waste generation indicates that low-income neighbourhoods discard relatively less packaging and more food waste, shoes and construction debris than middle and high income ones, which may be due to low purchasing power and schooling. Our findings indicate that more aluminium and uncoloured polyethylene terephthalate is discarded in the warmest months of the year, probably due to a greater consumption of canned and bottled drinks.

Actual Brazilian habitations in wood: A technology in development or a question of fashion?

Over the past few years there have significantly been increased the articles that approach the constructions in wood or with structure in wood in the specialized Brazilian magazines. This increase brings up indications that the incorporated values to these habitations are modifying, however it is not so simple to conclude that these issues can be associated to the development of incorporated technologies to the constructive system. The work presents, firstly, a survey performed in these publications that had the objective to verify which the constructive systems in wood is being more executed, under which cultural and technician standards. From that survey it was performed a study of the habitations constructed in mixing system whose structures are timbers and walls in masonry. The aesthetic and cultural questions involved are argued considering mainly that these habitations belong to a social class whose purchasing power increased.

Contribuição do uso de medicamentos para a admissão hospitalar

According to the Word Health Organization, adverse drug reactions (ADR) are any harmful and non intentional answer which occurred in doses normally used in human beings. The ADR can be responsible for 2.4% to 11.5% of hospital admissions. Therefore, this study aimed at knowing the admitted patient's demographic profile due to possible ADR, identifying the most frequent drugs and complaints, and evaluating the incidence of hospital admission related to drug use. Patients who were 18 years old or more and were admitted during a period of one month to a medical clinical of a general hospital were interviewed for one month about drug use before being admitted, as well as regarding to the complaint which led them to hospital. These information were analyzed according to official data, like MICROMEDEX® and WHO criteria as well. It was observed that the admission due to drug use occurred in most part of the cases in elderly [47.5% (66/139)] and women [62% (87/139)]. The most frequent drugs used were: omeprazole (16), analgesics (31), antihypertensive (31), simvastatin (7) and formoterol fumarate (6), and the symptoms were normally associated to the digestive (20.5%), circulatory (20.2%), respiratory (18.2%) and central nervous systems (13.9%). It was estimated that 15.5% (139/897) of the hospital admission occurred possibly due to the drug use. The data found by present study suggests some strategies in order to prevent ADR in the context of primary health care services, such as monitoring drug therapy, manly for patients with chronic diseases, elderly and polimedicated people; and pharmaceutical care including dispensation and purchasing of the drugs, a lot of them dispensed over the counter (OTC).

Modeling of a MIT for the application of a frequency inverter of the electric vehicle

Nowadays, drives that use a combination of induction motors and frequency inverters are very common, a fact due to the financial practicality and viability in purchasing and operating that system. This system modeling and simulation becomes important when it wants to evaluate the performance, to calculate and correct parameters, and it has a fundamental role in functionality and viability analysis for application of new configurations and technologies. This work is about to elaborate a simple induction motor model based in the torque versus speed characteristic, using the linearization method for application in a specific operation range to be controlled by a frequency inverter. © 2011 Springer-Verlag Berlin Heidelberg.

Sustainable urban energy planning: The case study of a tropical city

The urbanization of modern societies has imposed to the planners and decision-makers a more precise attention to facts not considered before. Several aspects, such as the energy availability and the deleterious effect of pollution on the populations, must be considered in the policy decisions of cities urbanization. The current paradigm presents centralized power stations supplying a city, and a combination of technologies may compose the energy mix of a country, such as thermal power plants, hydroelectric plants, wind systems and solar-based systems, with their corresponding emission pattern. A goal programming multi-objective optimization model is presented for the electric expansion analysis of a tropical city, and also a case study for the city of Guaratinguetá, Brazil, considering a particular wind and solar radiation patterns established according to actual data and modeled via the time series analysis method. Scenarios are proposed and the results of single environmental objective, single economic objective and goal programming multi-objective modeling are discussed. The consequences of each dispatch decision, which considers pollutant emission exportation to the neighborhood or the need of supplementing electricity by purchasing it from the public electric power grid, are discussed. The results revealed energetic dispatch for the alternatives studied and the optimum environmental and economic solution was obtained. © 2012 Elsevier Ltd.

Green supply chain management: Mapping the territory

The objective of this paper is to identify the main definitions, related practices and to point out future directions in green supply chain management (GSCM). After a literature review and systematisation of the published articles in this field, it was possible to identify: a) the main research objectives of analysed papers; b) the research methods adopted; c) the predominantly analysed industrial sectors; d) the GSCM practices considered by the researchers. Results are presented in each of these analytical perspectives. The main findings are: 1) there are various classifications, nomenclatures and types of GSCM practices, but the most commonly used by studies in GSCM are cleaner production, product design, reverse logistic and green purchasing; 2) from the highlighted definitions, the tonic is to adapt operating activities and incorporate the supply chain management philosophy (integration/ collaboration) to environmental concerns (impact reduction) in relations between links in the chain. These results can be useful for those interested in environmental management as well as supply chain management, considering the growing interest in GSCM. We also propose a research agenda on this subject. This is one of the most recent literature review and systematisation on green supply chain management. © 2013 Inderscience Enterprises Ltd.

Interpretação do consumidor, avaliação da intenção de compra e das características físico-químicas do néctar e do suco de laranja pronto para beber

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do Helicobacter em cães oriundos do Biotério Central da Unesp - Campus de Botucatu

Pós-graduação em Bases Gerais da Cirurgia - FMB

Educação para saúde sob a ótica da televisão digital e sua interatividade

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Estudo de viabilidade de implantação de usina de moagem de entulho com recursos da iniciativa privada no município de Bauru

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)