Correlative fractography: Combining scanning electron microscopy and light microscopes for qualitative and quantitative analysis of fracture surfaces

Correlative fractography is a new expression proposed here to describe a new method for the association between scanning electron microscopy (SEM) and light microscopy (LM) for the qualitative and quantitative analysis of fracture surfaces. This article presents a new method involving the fusion of one elevation map obtained by extended depth from focus reconstruction from LM with exactly the same area by SEM and associated techniques, as X-ray mapping. The true topographic information is perfectly associated to local fracture mechanisms with this new technique, presented here as an alternative to stereo-pair reconstruction for the investigation of fractured components. The great advantage of this technique resides in the possibility of combining any imaging methods associated with LM and SEM for the same observed field from fracture surface. © Microscopy Society of America 2013.

Estudo fitossanitário, multiplicação e taxonomia de nematoides encontrados em sementes de gramíneas forrageiras no Brasil

Pathogens in seeds imply quarantine constraints for exportation. This research aimed to quantify nematodes and fungus populations in seed samples of forage grasses from the main Brazilian producing states, and to multiply the nematodes in vitro, as well to study the taxonomy of the nematodes detected. Seed samples of 237 lots of different forage grasses from São Paulo, Minas Gerais, Mato Grosso do Sul, Mato Grosso, Bahia, and Goias States were collected and shipped for analyses in the Nematology and Plant Pathology Laboratories at FCAV[long dash]UNESP [long dash] Jaboticabal( SP) by Comercio e Industria Matsuda Imp., Exp. Ltd. Nematodes were extracted from 10 g of seeds. To detect the fungus, the Blotter-test was applied. The identifications were done by using a photonic microscope and a stereomicroscope. For the study of in vitro multiplication of the nematodes, the following parthenogenetic species were selected: Aphelenchoides sexlineatus, Aphelenchus sp. and Ditylenchus montanus. Cultures of the fungi Fusarium sp. and Didymella brioniae were used as substrate to multiply the nematodes in Petri dishes. Each plate was inoculated with 10 mature females, then incubated in B.O.D. at 25 [plus or minus]1 [degree]C, in the dark. Thirty days after inoculation, the nematodes were extracted. The populations obtained in the suspensions were estimated in the microscope using Peters counting chamber, and the reproduction factor estimated. For the taxonomic study of the nematodes, morphological characters of specimens were recorded under the light and scanning electron microscopes. The results indicated a large distribution of nematodes and fungus in seeds of forage grasses in Brazil. The nematodes identified in the present study were: Aphelenchoides besseyi, A. bicaudatus, A. fragariae, A. sexlineatus, Ditylenchus myceliophagus, D. dipsaci, D. montanus, and Aphelenchus sp. In addition, species of the fungi Fusarium, Helminthosporium and Phoma were recovered.

Morphological description of Amblyomma brasiliense Aragão, 1908 (Acari: Ixodidae) larvae and nymphs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Iron phthalocyanine in non-aqueous medium forming layer-by-layer films: growth mechanism, molecular architecture and applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantitative fractography by digital image processing: NIH Image macro tools for stereo pair analysis and 3-D reconstruction

A set of NIH Image macro programs was developed to make qualitative and quantitative analyses from digital stereo pictures produced by scanning electron microscopes. These tools were designed for image alignment, anaglyph representation, animation, reconstruction of true elevation surfaces, reconstruction of elevation profiles, true-scale elevation mapping and, for the quantitative approach, surface area and roughness calculations. Limitations on time processing, scanning techniques and programming concepts are also discussed.

MRT letter: Extended depth from focus reconstruction method for stretch zone measurement in 15-5PH steel

The stretch zone width (SZW) data for 15-5PH steel CTOD specimens fractured at -150 degrees C to + 23 degrees C temperature were measured based on focused images and 3D maps obtained by extended depth-of-field reconstruction from light microscopy (LM) image stacks. This LM-based method, with a larger lateral resolution, seems to be as effective for quantitative analysis of SZW as scanning electron microscopy (SEM) or confocal scanning laser microscopy (CSLM), permitting to clearly identify stretch zone boundaries. Despite the worst sharpness of focused images, a robust linear correlation was established to fracture toughness (KC) and SZW data for the 15-5PH steel tested specimens, measured at their center region. The method is an alternative to evaluate the boundaries of stretched zones, at a lower cost of implementation and training, since topographic data from elevation maps can be associated with reconstructed image, which summarizes the original contrast and brightness information. Finally, the extended depth-of-field method is presented here as a valuable tool for failure analysis, as a cheaper alternative to investigate rough surfaces or fracture, compared to scanning electron or confocal light microscopes. Microsc. Res. Tech. 75:11551158, 2012. (C) 2012 Wiley Periodicals, Inc.

Evaluation of zona pellucida birefringence intensity during in vitro maturation of oocytes from stimulated cycles

Background: This study evaluated whether there is a relationship between the zona pellucida birefringence (ZP-BF) intensity and the nuclear (NM) and cytoplasmic (CM) in vitro maturation of human oocytes from stimulated cycles.Results: The ZP-BF was evaluated under an inverted microscope with a polarizing optical system and was scored as high/positive (when the ZP image presented a uniform and intense birefringence) or low/negative (when the image presented moderate and heterogeneous birefringence). CM was analyzed by evaluating the distribution of cortical granules (CGs) throughout the ooplasm by immunofluorescence staining. CM was classified as: complete, when CG was localized in the periphery; incomplete, when oocytes presented a cluster of CGs in the center; or in transition, when oocytes had both in clusters throughout cytoplasm and distributed in a layer in the cytoplasm periphery Nuclear maturation: From a total of 83 germinal vesicle (GV) stage oocytes, 58 of oocytes (69.9%) reached NM at the metaphase II stage. From these 58 oocytes matured in vitro, the high/positively scoring ZP-BF was presented in 82.7% of oocytes at the GV stage, in 75.8% of oocytes when at the metaphase I, and in 82.7% when oocytes reached MII. No relationship was observed between NM and ZP-BF positive/negative scores (P = 0.55). These variables had a low Pearson's correlation coefficient (r = 0.081). Cytoplasmic maturation: A total of 85 in vitro-matured MII oocytes were fixed for CM evaluation. Forty-nine oocytes of them (57.6%) showed the complete CM, 30 (61.2%) presented a high/positively scoring ZP-BF and 19 (38.8%) had a low/negatively scoring ZP-BF. From 36 oocytes (42.3%) with incomplete CM, 18 (50%) presented a high/positively scoring ZPBF and 18 (50%) had a low/negatively scoring ZP-BF. No relationship was observed between CM and ZP-BF positive/negative scores (P = 0.42). These variables had a low Pearson's correlation coefficient (r = 0.11).Conclusions: The current study demonstrated an absence of relationship between ZP-BF high/positive or low/negative score and nuclear and cytoplasmic in vitro maturation of oocytes from stimulation cycles.

Morphological characterization of rat incisor fluorotic lesions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Imbibition of Swietenia macrophylla (Meliaceae) seeds: the role of stomata

Background and Aims the occurrence of stomata in seed coats is uncommon and there is limited information about their function(s). The aim of this study was to verify the distribution of stomata in seed coats of Swietenia macrophylla and to relate it to the imbibition process and aspects of the structure of the outer integument layers.Methods For the structural and ultrastructural studies, the seeds were processed using the usual techniques and studied under light and scanning electron microscopes. Histochemical tests were employed to identify the cell wall composition in the different seed coat portions. To assess the role of the stomata in the imbibition, non-impervious seeds were compared with partially impervious ones, in which only the embryo, median or hilar regions were left free. Further, the apoplastic pathway marker was employed to confirm the role of the stomata as sites of water passage during imbibition.Key Results A positive relationship was observed between seed coat thickness and stomata density. The stomata were devoid of movement, with a large pore. They occurred in large numbers in the embryo region and extended with lower frequency towards the wing. Imbibition rates were related to stomata density, suggesting that the stomata act as preferential sites for water entry in the S. macrophylla seeds.Conclusions At maturity, the stomata in the seed coat play a significant role in seed imbibition. The data may also infer that these permanently opened stomata have an important role in gas exchange during seed development, aiding embryo respiration.

Anatomy and ontogeny of the pericarp of Pterodon emarginatus Vogel (Fabaceae, Faboideae), with emphasis on secretory ducts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morfoanatomia comparada do talo de duas espécies de Parmotrema (Parmeliaceae, Ascomycota liquenizados) com rizinas dimórficas

Utilizando técnicas convencionais para estudos histológicos em microscopia de luz com auxílio de luz polarizada, se descreve e compara a anatomia do talo de duas espécies de Parmotrema, Parmotrema consors e Parmotrema cf. reparatum, com rizinas dimórficas e máculas efiguradas, antigamente incluídas em Canomaculina. Os dados obtidos neste estudo mostram que as duas espécies são anatomicamente distintas em relação às características do epicórtex, córtex superior e rizinas. Parmotrema cf. reparatum é anatomicamente similar ao grupo de Parmotrema com máculas reticulares (antigamente incluídas em Rimelia) previamente estudados. Os polissacarídeos típicos do epicórtex e córtex superior do grupo de espécies de Parmotrema com rizinas dimórficas possuem diferenciação histoquímica daqueles mencionados para o epicórtex e córtex superior do grupo de Parmotrema com máculas reticulares.

Anatomia comparada do talo de duas espécies de Parmotrema (Parmeliaceae, Ascomycota liquenizados) com máculas reticulares

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Floral development in Potamogeton (Potamogetonaceae, Alismatales) with emphasis on gynoecial features

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Microscopical Evaluation of Extracellular Matrix and Its Relation to the Palatopharyngeal Muscle in Obstructive Sleep Apnea

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of thickness coating on the electrochemical behaviour of thermal spray Cr3C2-NiCr coatings

Thermally sprayed HVOF coatings are increasingly being used in industrial applications where high wear and corrosion resistance are needed [1,2]. In this paper, electrochemical ac and de experiments were used in order to obtain the corrosion resistance of coated steel with different numbers of Cr3C2-NiCr layers. This work has been performed in order to determine the role of coating thickness in the corrosion behaviour of a steel protected with cermet thermally sprayed coatings. It is known that a thicker layer protects better against corrosion when a metallic coating is evaluated. But cermet coatings, such as Cr3C2-NiCr, contain higher levels of porosity and residual stresses than metallic coatings, which really could influence the corrosion resistance of the deposited layer. Electrochemical measurements, such as Open-Circuit Potential (E-Osubset of), Polarisation Resistance (RP) and Cyclic Voltammetry (CV), were performed in an aerated 3.4 NaCI media (%wt.). Electrochemical Impedance Measurements (EIS) were also done in order to obtain a mechanism that explains the corrosion process. Structural Characterisation was carried out by means of Optical and Scanning Electron Microscopes (OM, SEM) with an Energy Dispersive Spectrometry analyser (EDS). Results show that the corrosion resistance of the complete system is mainly influenced by the substrate behaviour. The application of a higher number of deposited layers did not substantially increase their anticorrosive properties. Stress generation during the spraying deposition process plays an important role in the behaviour of the coated steel against corrosion phenomena. (C) 2002 Elsevier B.V. B.V All rights reserved.