Design and Analysis of Optical Interconnection Networks for a Dataflow Parallel Computer

This work shows the design, simulation, and analysis of two optical interconnection networks for a Dataflow parallel computer architecture. To verify the optical interconnection network performance on the Dataflow architecture, we have analyzed the load balancing among the processors during the parallel programs executions. The load balancing is a very important parameter because it is directly associated to the dataflow parallelism degree. This article proves that optical interconnection networks designed with simple optical devices can provide efficiently the dataflow requirements of a high performance communication system.

DESIGN AND TEST OF A 7-T SPLIT-PAIR MAGNET FOR MAGNETIC SEPARATION

A 160 mm bore, 7 T split-pair magnet was constructed and tested aiming to mineral processing through HGMS (high gradient magnetic separation) or HCMS (helical channel magnetic separation.) This work describes the design and test results of the pair of coils operating under current in parallel mode. In the case of antiparallel current mode large repulsive force between coils is generated and a strong magnetic field gradient outside the magnet is created. A continuous magnetic separation system made with a helical channel magnetic separator for application in TiO2 processing is analysed.

Influence of Wood Moisture Content on the Modulus of Elasticity in Compression Parallel to the Grain

Brazilian Standard ABNT NBR7190:1997 for timber structures design, adopts a first degree equation to describe the influence of wood moisture content. Periodically, when necessary, the referred standard is revised in order to analyze inconsistencies and to adopt considerations according new realities verified. So, the present paper aims to examine the adequacy of its equation which corrects to 12% of moisture the values of rigidity properties obtained on experimental tests. To quantify the moisture influence on modulus of elasticity, it was applied tests of compression parallel to the grain for six specimens of different strength classes, considering nominal moisture of 12; 20; 25; 30%. As results, modulus of elasticity in the moisture range 25-30% showed statistically equivalents, and was obtained a first degree equation to correlate the studied variables which leads to statically equivalent estimations when compared with results by ABNT NBR7190:1997 equation. However, it was indicated to maintain the current expression for the next text of the referred document review, without prejudice to statistical significance of the estimates.

An Improved Design Procedure for LCC Resonant Filter of Dimmable Electronic Ballasts for Fluorescent Lamps, Based on Lamp Model

This paper presents an improved design methodology for determining the parameters used in the classical Series-Parallel Loaded Resonant (SPLR) filter employed in the switching frequency controlled dimmable electronic ballasts. According to the analysis developed in this paper, it is possible to evaluate some characteristics of the resonant filter during the dimming process, such as: range of switching frequency, phase shift and rms value of the current drained by the resonant filter + fluorescent lamp set.

An improved design procedure for LCC resonant filter of dimmable electronic ballasts for fluorescent lamps, based on lamp model

This paper presents an improved design methodology for the determination of the parameters used in the classical series-resonant parallel-loaded (SRPL) filter employed in the switching frequency controlled dimmable electronic ballasts. According to the analysis developed in this paper, it is possible to evaluate some important characteristics of the resonant filter during the dimming operation, such as: range of switching frequency, phase shift, and rms value of the current drained by the resonant filter + fluorescent lamp set. Experimental results are presented in order to validate the analyses developed in this paper. © 2005 IEEE.

Stromal myofibroblasts in squamous cell carcinoma of the tongue in young patients - a multicenter collaborative study

Objective. The purpose of this study was to evaluate the presence of myofibroblasts, frequently associated with a more aggressive neoplastic behavior, in oral tongue squamous cell carcinoma (TSCC) of young patients and to compare with the distribution observed in older patients.Study Design. Tumor samples from 29 patients younger than 40 years old affected by TSCC were retrieved and investigated for the presence of stromal myofibroblasts by immunohistochemical reactions against a smooth muscle actin, and the results obtained were compared to TSCC cases affecting older patients.Results. No positive reaction could be found in the stromal areas devoid of neoplastic tissue, whereas myofibroblasts were present in 58.6% of the lesions in young patients and in 75.9% of the older ones. No significant difference was found when comparing the invasive front and the overall stroma of both groups, and no correlation could be obtained with stromal a smooth muscle actin expression, higher tumor grades or clinical stage (P > .05).Conclusion. There was no significant difference between the presence of stromal myofibroblasts of TSCC affecting young and old individuals.

Bit-parallel coprocessor for standard ECC-GF(2m) on FPGA

This paper presents the design of a high-speed coprocessor for Elliptic Curve Cryptography over binary Galois Field (ECC- GF(2m)). The purpose of our coprocessor is to accelerate the scalar multiplication performed over elliptic curve points represented by affine coordinates in polynomial basis. Our method consists of using elliptic curve parameters over GF(2163) in accordance with international security requirements to implement a bit-parallel coprocessor on field-programmable gate-array (FPGA). Our coprocessor performs modular inversion by using a process based on the Stein's algorithm. Results are presented and compared to results of other related works. We conclude that our coprocessor is suitable for comparing with any other ECC-hardware proposal, since its speed is comparable to projective coordinate designs.

The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Computação gráfica: ferramenta didática de comunicação, design e produção

This paper aims to show some advantages brought by the computer graphics and inter-disciplinary communication within the academic institution UNESPBauru, using it as a teaching tool in undergraduate engineering and design. The communication in the classroom could be reconfigured through the adoption of new technologies by drawing a parallel between old and new programmatic contents, setting goals and parameters to improve communication between teacher and student, transferring and sediment of the given content and increasing production in quantity and complexity of work undertaken by students. As an example of computer graphics use, this work presents a final graduation work that was successful in the market, "Teardrop Trailer Caracol", as result of the final adoption of CAD technology as a teaching tool, design and production.

A ornamentação contemporânea em arte e design: função estética, anagógica, terapêutica

Taking as a starting point the reflection on the ornament, is delineated an interpretative analysis of delimitation between art and design in the extent of the aesthetics. Presupposing the ornament as an elementary and universal form of the all aesthetics’ manifestations, trying to work, through recent contributions and in an unified way, concepts regarding the aesthetics in parallel with the phenomenon of the perception. The ornament as element previously “ordered” front to the organization need that the interpretation demands, it constitutes fertile philosophical instrument, for all the art forms and of design, which seeks to provide an aesthetic sensation. Returned to the thoughtful function, the ornament has as essential purpose to stimulate the aesthetic experimentation, capable to induce the perception to subtler states of conscience similar of to the ecstasy, where the spirit from whom contemplates, can live experiences of extreme freedom and intense pleasure. . Establishing semiotics foundations capable of evidencing a function anagogic-therapeutics in the action of conceiving and to meditating, alternately, an object with function strictly ornamental (aesthetics), also intending the reflection of moral stamp on the ornamental concept of the decency as conciliatory solution in the intersection between art and design, concerning the creativity of the formative process.