16 resultados para PPR
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
Pós-graduação em Odontologia - FOA
Resumo:
Pós-graduação em Odontologia - FOA
Resumo:
The rehabilitation with mandibular distal extension removable partial dentures (DERPD) is complex and the use of implants has been improving the functioning of this approach. The insertion bony level around of the last support tooth is an aggravating factor, since it can harm the longevity of the treatment. Thus, the aim of this research was to evaluate the displacement tendency of a mandibular DERPD associated to an implant, with different insertion bony levels and different connections between the RPD and the support tooth, by finite element analysis. Eight models were made: MA - DERPD, incisal rest, no bony loss; MB - DERPD, distal plate, no bony loss; MC - DERPD, incisal rest, no bony loss, with implant and ERA system; MD - DERPD, distal plate, no bony loss, with implant and ERA system; ME - DERPD, incisal rest, bony loss; MF - DERPD, distal plate, bony loss; MG - DERPD, incisal rest, bony loss, with implant and ERA system; MH - DERPD, distal plate, bony loss, with implant and ERA system. Loads of 50 N in each peak were applied. Displacement maps were obtained and showed that implant favors this association and the bony loss harms the prognostic of the prosthesis. It is concluded that: the introduction of the implant with ERA system reduced the displacement tendency of the tooth and supporting structures; introduction of distal plate reduced the movement tendency of the support tooth; the decrease of the periodontal support didn't influence significantly the displacement tendency of the models with distal plate distal, but it influenced the models with distal incisal rest.
Resumo:
Com o objetivo de avaliar a influência da relação volumoso:concentrado sobre a composição tecidual e os rendimentos de carcaça e de cortes comerciais de cordeiros Morada Nova em confinamento, utilizaram-se 18 cordeiros com peso vivo (PV) inicial de 15 kg, distribuídos em seis grupos de três animais (um em cada dieta), de acordo com a relação volumoso(V):concentrado(C): 40:60, 55:45 e 70:30. Foram avaliados os pesos de corpo vazio (PCV), de carcaça quente (PCQ) e de carcaça fria (PCF), a partir dos quais foram calculados os rendimentos biológico (RB), de carcaça quente (RCQ) e de carcaça fria (RCF) e a perda de peso por resfriamento (PPR). A carcaça foi dividida em cinco cortes cárneos (perna, lombo, costelas, paleta e pescoço), os quais foram pesados para cálculo de seus rendimentos em relação ao peso da meia-carcaça. A perna foi dissecada em músculo, osso e gordura e os pesos desses tecidos foram expressos em peso absoluto e em porcentagem da perna. Calcularam-se as relações músculo:osso e músculo:gordura, o índice de musculosidade da perna (IMP) e a área de olho-de-lombo (AOL). O aumento de 30 para 60% de concentrado na dieta elevou os rendimentos de carcaça quente e carcaça fria, assim como o rendimento biológico. Os crescentes teores de concentrado na dieta não afetaram a porcentagem de músculo na perna, mas proporcionaram maior deposição de gordura e maior área de olho-de-lombo.
Resumo:
O manejo de plantas daninhas em ambientes aquáticos requer cuidado diferencial e específico, a fim de evitar a contaminação ou alteração nas funções dos corpos hídricos e otimização do custo-benefício das operações. O estudo das características genéticas de populações de plantas daninhas aquáticas fornece informações que podem auxiliar no seu controle e manejo. A alface-d'água é uma planta aquática flutuante livre amplamente distribuída em todo o Brasil, mas é em ambientes aquáticos eutrofizados que essa e outras espécies de rápido desenvolvimento causam problemas sociais e econômicos, devido à grande massa vegetal produzida. Este estudo caracterizou geneticamente populações de alface-d'água coletadas em 15 reservatórios de hidrelétricas (Barra Bonita-BAB, Bariri-BAR, Ibitinga-IBI, Chavantes-CHA, Salto Grande-SAG, Jurumirim-JUR, Promissão-PRO Jaguari-JAG, Nova Avanhandava-NAV, Mogi-Guaçu-MOG, Limoeiro-LIM, Três Irmãos-TRI, Ilha Solteira-ILS, Jupiá-JUP e Porto Primavera-PPR) do Estado de São Paulo. As análises foram realizadas no NUPAM (Núcleo de Pesquisas Avançadas em Matologia), ligado à FCA/UNESP, campus de Botucatu-SP. A técnica utilizada no estudo da diversidade genética foi o RAPD. Os materiais amostrados nos reservatórios do Estado foram muito similares em sua maioria. As populações de NAV, MOG, IBI, JUR, PRO e CHA foram idênticas geneticamente. BAB e SAG, LIM e TRI também foram muito parecidas, apresentando índice de distância genética de 0,0093 e 0,0178, respectivamente. A grande maioria dos reservatórios estudados (93%) apresentou distâncias inferiores a 0,30, formando um grupo definido. No entanto, a população de Jupiá, em média, foi a que apresentou maior diversidade genética (0,45).
Resumo:
Breeds of sheep with resistance to nematode infection often display a reduced periparturient rise (PPR) in faecal egg counts (FEC) when compared with susceptible sheep. This trial was carried out to compare the resistance of Santa Ines, an indigenous Brazilian breed of sheep, and Ile de France ewes to natural infections by gastrointestinal nematodes, especially in the periparturient period. Twelve Santa lnes and 10 Ile de France ewes were estrus synchronized and then mated (December 2001). Lambing occurred from 30 April to 19 June 2002 and the lambs were weaned at 60 days of age. Faecal egg counts, packed cell volume (PCV), total plasma protein levels and peripheral eosinophils counts were determined from November 2001 to September 2002. To prevent deaths, individual treatment with anthelmintics was provided to ewes with FEC higher than 4000 eggs per gram (EPG) or with PCV lower than 21%. The percentage of Santa Ines ewes treated with anthelmintics was lower than that of Ile de France sheep. Eight of the 10 Ile de France ewes were treated, with one of them requiring four treatments, one requiring three treatments, and two requiring two treatments. The remaining four received a single treatment. In contrast, only 5 of the 12 Santa lnes ewes required treatment and for each this was done only once. The mean values of PCV were in the normal range in the Santa Ines ewes. In contrast, mean PCVs of Ile de France ewes reached a low of 24.5% in the second month after lambing and were significantly lower than Santa Ines 1 month before lambing (P < 0.05) and 2 months after lambing (P < 0.07). The mean plasma protein level was significantly lower in the Ile de France ewes in the second month after lambing (P < 0.01) coinciding with a reduction in PCV. The ewes of both breeds had high mean numbers of eosinophils in blood, which increased even further post-weaning when a marked reduction in FEC occurred. Haemonchus larvae were the most numerous genus in faecal cultures for both breeds followed by Trichostrongylus, Oesophagostomum and Cooperia. A periparturient rise in FEC was observed in both breeds. However, Santa Ines ewes showed a higher capacity to support the infection in an environment contaminated with large number of infective larvae of gastrointestinal nematodes. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
O objetivo deste estudo foi determinar, em mesatenistas bem treinados, as aptidões aeróbia e anaeróbia. Participaram do presente estudo oito mesatenistas brasileiros treinados do sexo masculino (18±2 anos). Os sujeitos foram submetidos a um teste incremental específico para determinação do consumo pico de oxigênio (VO2PICO), intensidade associada ao VO2PICO (iVO2PICO) e do ponto de compensação respiratório (PCR) e a dois testes de esforço repetitivo, sendo o teste de RAST e o índice anaeróbio alático (IAA), para determinação dos índices anaeróbios. O VO2PICO correspondeu a 50,5±4,4ml kg-1 min-1 , a iVO2PICO a 52,1±9,6 bolas min-1 e o PCR a 44,9±8,0 bolas min-1. No RAST, a potência pico (PP) e a potência média (PM) relativa corresponderam a 9,0±1,3W kg-1 e 7,0±0,9W kg-1, respectivamente, enquanto que o IAA foi 1,14±0,51 mM/m s-1 . Esses valores de VO2PICO e dos parâmetros anaeróbios quando comparados a valores de outros esportes com raquetes caracterizaram que mesatenistas brasileiros treinados apresentam potência aeróbia moderada e potência anaeróbia é baixa.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Odontologia - FOA
Resumo:
Pós-graduação em Medicina Veterinária - FMVZ
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Este artigo pretende cobrir algumas características do trabalho e do quotidiano feminino em dois países socialistas (URSS e R.P.P.) , visando discutir a persistência de algumas contradições entre o trabalho doméstico e o trabalho profissional, no quadro histórico do processo de liberação feminina e de ampliação da participação da mulher na força de trabalho.
Resumo:
The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.
Resumo:
The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.