Variable structure controller and observer applied to induction machine

This work will propose the control of an induction machine in field coordinates with imposed stator current based on theory of variable structure control and sliding mode. We describe the model of an induction machine in field coordinates with imposed stator current and we show the design of variable structure control and sliding mode to get a desirable dynamic performance of that plant. To estimate the inaccessible states we will use a state observer (estimator) based on field coordinates induction machine. We will present the results of simulations in any operation condition (start, speed reversal and load) and with parameters variation of the machine compared to a PI control scheme.

The effect of actuator and sensor placement on the active control of rotor unbalance

This paper investigates both theoretically and experimentally the effect of the location and number of sensors and magnetic bearing actuators on both global and local vibration reduction along a rotor using a feedforward control scheme. Theoretical approaches developed for the active control of beams have been shown to be useful as simplified models for the rotor scenario. This paper also introduces the time-domain LMS feedforward control strategy, used widely in the active control of sound and vibration, as an alternative control methodology to the frequency-domain feedforward approaches commonly presented in the literature. Results are presented showing that for any case where the same number of actuators and error sensors are used there can be frequencies at which large increases in vibration away from the error sensors can occur. It is also shown that using a larger number of error sensors than actuators results in better global reduction of vibration but decreased local reduction. Overall, the study demonstrated that an analysis of actuator and sensor locations when feedforward control schemes are used is necessary to ensure that harmful increased vibrations do not occur at frequencies away from rotor-bearing natural frequencies or at points along the rotor not monitored by error sensors.

An Optimal Control Framework for Resources Management in Agriculture

An optimal control framework to support the management and control of resources in a wide range of problems arising in agriculture is discussed. Lessons extracted from past research on the weed control problem and a survey of a vast body of pertinent literature led to the specification of key requirements to be met by a suitable optimization framework. The proposed layered control structure—including planning, coordination, and execution layers—relies on a set of nested optimization processes of which an “infinite horizon” Model Predictive Control scheme plays a key role in planning and coordination. Some challenges and recent results on the Pontryagin Maximum Principle for infinite horizon optimal control are also discussed.

Artificial immune systems applied to optimal capacitor placement in radial distribution networks

The capacitor placement problem for radial distribution networks aims to determine capacitor types, sizes, locations and control scheme. This is a combinatorial problem that can be formulated as a mixed integer nonlinear program. The paper presents an algorithm inspired in artificial immune systems and developed for this specific problem. A good performance was obtained through experimental tests applied to known systems. © 2006 IEEE.

Estimation of electrical machine speed using sensorless technology and neural networks

The use of sensorless technologies is an increasing tendency on industrial drivers for electrical machines. The estimation of electrical and mechanical parameters involved with the electrical machine control is used very frequently in order to avoid measurement of all variables related to this process. The cost reduction may also be considered in industrial drivers, besides the increasing robustness of the system, as an advantage of the use of sensorless technologies. This work proposes the use of a recurrent artificial neural network to estimate the speed of induction motor for sensorless control schemes using one single current sensor. Simulation and experimental results are presented to validate the proposed approach. ©2008 IEEE.

Integrated single-stage converters with Tri-state modulation suitable for photovoltaic systems

The aim of this work is to present two topological simplified converters named Tri-state Boost and Tri-state Buck-Boost integrated single-phase inverters. An important operation capability can be achieved for these converters using a Tri-state Modulation control scheme. This is the inductive power decoupling and the independent input output control. These features are directly related with the photovoltaic micro-converter needs, improving efficiency, cost and mainly lifetime. These features for the proposed modulation are confirmed through experimental results. © 2011 IEEE.

Metaheurística particle swarm utilizada para alocação ótima de bancos de capacitores em sistemas de distribuição radial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Regulação de tensão utilizando compensador série controlado a tiristores para sistemas de distribuição

Pós-graduação em Engenharia Elétrica - FEIS

S-metolachlor efficacy on the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in mechanically green harvested sugarcane

Objetivou-se com este trabalho avaliar o controle em pré-emergência de Brachiaria decumbens, Digitaria horizontalis e Panicum maximum pelo herbicida S-metolachlor aplicado em pré-emergência em área de cana-de-açúcar colhida mecanicamente sem queima prévia das plantas, com e sem palha sobre o solo. O delineamento experimental foi o de blocos ao acaso, com quatro repetições, em esquema de parcela subdividida 7 x 2. Nas parcelas, foram estudados cinco tratamentos de herbicidas (S-metolachlor a 1,44, 1,92 e 2,40 kg ha-1; clomazone a 1,20 kg ha-1; e isoxaflutole a 0,188 kg ha-1) e duas testemunhas sem aplicação. Nas subparcelas, foi avaliada a manutenção ou não da palha de cana na superfície do solo. A eficácia do herbicida S-metolachlor não foi prejudicada pela presença de 14 ou 20 t ha-1 de palha de cana sobre o solo. Com a manutenção da palha, a dosagem de S-metolachlor para o controle adequado das plantas daninhas foi de 1,44kgha-1. No ambiente sem palha, o S-metolachlor controlou B. decumbens, D. horizontalis e P. maximum nas dosagens de 1.92, 1.44 e 1.92kgha-1, respectivamente. Nas duas condições de palha, os herbicidas clomazone e isoxaflutole foram eficazes para as espécies estudadas. O S-metolachlor não causou nenhum sintoma visível de intoxicação à cana-de-açúcar. O clomazone e o isoxaflutole ocasionaram injúrias visuais às plantas de cana. Os herbicidas estudados não afetaram o número de colmos viáveis por m², a altura e o diâmetro de colmos.

Effect of bean genotypes, insecticides, and natural products on the control of Bemisia tabaci (Gennadius) biotype B (Hemiptera: Aleyrodidae) and Caliothrips phaseoli (Hood) (Thysanoptera: Thripidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of Different Periods of Clomazone plus Hexazinona Permanence in Soil and Sugarcane Mulch before the Occurrence of Rain on Weed Control Efficacy

The objective of this work was to evaluate the efficacy of the formulated mixture clomazone and hexazinone applied in soil or combined with sugarcane mulch, after different periods of permanence without the occurrence of rain. The experiment was carried out in vases under greenhouse conditions in Botucatu, São Paulo, Brazil. The weeds Brachiaria decumbens, Ipomoea grandifolia, Ipomoea hederifolia and Euphorbia heterophylla were sown and covered or not with sugarcane mulch. The experiment was arranged in a complete randomized design with four repetitions. The treatments were displaced in a 3x6 factorial scheme, with the factors being six periods without rain (0, 3, 7, 15, 30, and 60 days) and three modes of herbicide application(on the soil without sugarcane mulch, on and under sugarcane mulch). Control evaluations were carried out at 10, 21, 35 and 42 days after the occurrence of rain. The clomazone + hexazinone mixture promoted an excellent weed control for all the species studied when applied on, under, or without sugarcane mulch. However, the control levels tended to reduce for periods over 60 days without rain.

Towards coherent optical control of a single hole spin: Rabi rotation of a trion conditional on the spin state of the hole

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Performance Comparisons of EWMA Control Chart Schemes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of recombinant LH supplementation to recombinant FSH during induced ovarian stimulation in the GnRH-agonist protocol: a matched case-control study

Background: Some studies have suggested that the suppression of endogenous LH secretion does not seem to affect the majority of patients who are undergoing assisted reproduction and stimulation with recombinant FSH (r-FSH). Other studies have indicated that a group of normogonadotrophic women down-regulated and stimulated with pure FSH preparations may experience low LH concentrations that compromise the IVF parameters. The present study aimed to compare the efficacy of recombinant LH (r-LH) supplementation for controlled ovarian stimulation in r-FSH and GnRH-agonist (GnRH-a) protocol in ICSI cycles.Methods: A total of 244 patients without ovulatory dysfunction, aged < 40 years and at the first ICSI cycle were divided into two groups matched by age according to an ovarian stimulation scheme: Group I (n = 122): Down-regulation with GnRH-a + r-FSH and Group II (n = 122): Downregulation with GnRH-a + r-FSH and r-LH (beginning simultaneously).Result(s): The number of oocytes collected, the number of oocytes in metaphase II and fertilization rate were significantly lower in the Group I than in Group II (P = 0.036, P = 0.0014 and P = 0.017, respectively). In addition, the mean number of embryos produced per cycle and the mean number of frozen embryos per cycle were statistically lower (P = 0.0092 and P = 0.0008, respectively) in Group I than in Group II. Finally the cumulative implantation rate (fresh+thaw ed embryos) was significantly lower (P = 0.04) in Group I than in Group II. The other clinical and laboratory results analyzed did not show difference between groups.Conclusion: These data support r-LH supplementation in ovarian stimulation protocols with r-FSH and GnRH-a for assisted reproduction treatment.