Thermoeconomic analysis method for optimization of combined heat and power systems - part II

In this paper, a thermoeconomic functional analysis method based on the Second Law of Thermodynamics and applied to analyze four cogeneration systems is presented. The objective of the developed technique is to minimize the operating costs of the cogeneration plant, namely exergetic production cost (EPC), assuming fixed rates of electricity production and process steam in exergy base. In this study a comparison is made between the same four configurations of part I. The cogeneration system consisting of a gas turbine with a heat recovery steam generator, without supplementary firing, has the lowest EPC. (C) 2004 Published by Elsevier Ltd.

Planning and Projects of Secondary Electric Power Distribution Systems

This paper proposes a methodology to achieve integrated planning and projects for secondary distribution circuits. The planning model is formulated as a mixed integer nonlinear programming problem (MINLP). In order to resolve this problem, a tabu search (TS) algorithm is used, with a neighborhood structure developed to explore the physical characteristics of specific geographies included in the planning and expansion of secondary networks, thus obtaining effective solutions as well as low operating costs and investments. The project stage of secondary circuits consists of calculating the mechanical efforts to determine the support structures of the primary and secondary distribution systems and determining the types of structures that should be used in the system according to topological and electrical parameters of the network and, therefore, accurately assessing the costs involved in the construction and/or reform of secondary systems. A constructive heuristic based on information of the electrical and topological conditions between the medium voltage and low voltage systems is used to connect the primary systems and secondary circuits. The results obtained from planning and design simulations of a real secondary system of electric energy distribution are presented.

Cogasification of solid fuels

High efficiency gas turbine based systems, utility deregulation and more stringent environmental regulations strongly favor the use of natural gas over coal and other solid fuels in new electricity generators. Solid fuels could continue to compete, however, if a low cost gasifier fed by low cost feedstocks can be coupled with a gas turbine system. We examine on-site gasification of coal with other domestic fuels in an indirectly heated gasifier as a strategy to lower the costs of solid fuel systems. The systematics of gaseous pyrolysis yields assembled with the help of thermal measurement data and molecular models suggests blending carbonaceous fuels such as coal, coke or char with oxygenated fuels such as biomass, RDF, MSW, or dried sewage sludge. Such solid fuel blending can, with the help of inexpensive catalysts, achieve an optimum balance of volatiles, heating values and residual char thus reducing the technical demands upon the gasifier. Such simplifications should lower capital and operating costs of the gasifier to the mutual benefit of both solid fuel communities.

Avaliação da capacidade de uso da terra da bacia do córrego do cavalheiro - Analândia, SP

Environmental factors are important in agriculture and need to be considered for getting good degree of development and reasonable efficiency, by reducing their operating costs. To this end, land use shall be appropriated to the conditions offered by the physical elements of the landscape. By facing such questions, this paper aims is to present of mapping the ability of land use of the hydrographic basins Cavalheiro Stream basin (in the city of Analândia - São Paulo State - Brazil) which presents serious erosion problems. Besides it aims to assess if the current land use in this area is consistent with the identified land use ability. For this we have made a cartographic document that spatializes the various classes of usability and its main restrictions. The correlative analysis between that document and land use data showed that Cavalheiro Stream's current use is predominantly inappropriate with the usability of land, which was identified from the physical attributes of the studied area, except for a few sites that are used for forestry and pasture placed in Western, Eastern and Central-South.

Subsolagem em profundidade variada com base no mapeamento de áreas de manejo específico

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Avaliação da produção de uvas finas para mesa na região noroeste do Estado de São Paulo: questões técnicas, ambientais e econômicas

Pós-graduação em Agronomia - FEIS

Analise de viabilidade técnica-econômica na substituição de um sistema combinado de geração de vapor-vácuo por bombas secas

Pós-graduação em Engenharia Mecânica - FEG

Planejamento de sistemas de distribuição de energia elétrica através de um modelo de Programação Linear Inteiro Misto (plim)

Pós-graduação em Engenharia Elétrica - FEIS

Influência do processo de fabricação no comportamento mecânico de rodas ferroviárias

Pós-graduação em Engenharia Mecânica - FEG

Estudo comparativo de metodologias aplicadas em análises de fibra em detergente neutro e fibra em detergente ácido com gerenciamento de resíduos químicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da implantação iônica por imersão em plasma no aço ferramenta tipo H13

Pós-graduação em Engenharia Mecânica - FEG

Caracterização de motor aeronaútico utilizando misturas de gasolina de aviação e etanol: aspectos fluidodinâmicos, termodinâmicos e ecológicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade da madeira de eucalipto em função do espaçamento, da adubação e da idade conduzida no sistema de curta rotação

Pós-graduação em Ciência Florestal - FCA

Planejamento de sistemas de distribuição de energia elétrica de média tensão através de um algoritmo de busca dispersa

Pós-graduação em Engenharia Elétrica - FEIS

Análise comparativa entre sistemas de resfriamento de injeção de plástico

This study aims to prove the economic feasibility of the installation of mechanical compression chillers on plastic injection molding machines in order to reduce the production cycle time of toothbrush cables in a specific case study. This evidence was confirmed by the comparative analysis of the system replaced and the new system installed. The old system had only one closed loop cooling tower which pumped chilled water to the injection molds, and the new system has the same tower sending cold water to the condensers of individual chillers installed on each injection machine. We conducted an analysis of energy efficiency in each system, showing that in terms of thermal efficiency virtually nothing has changed, but in terms of electricity demand the new system consumes 60.3 kW more. We conducted an analysis of machine productivity for both systems, showing a much higher productivity of the new system due to reduced cycle times caused by the presence of chillers and their greater cooling capacities. Equipped with data such as electricity rates, increases in operating costs and initial investments, the increase in consumption and demand of electricity plus the cycle time reduction were also calculated over so the simple payback 1 year and 2 months was reached