WiMAX interoperabilidade mundial para acesso de microondas

This paper presents a technique dubbed WiMAX radio link, the IEEE 802.16 was completed in October 2001 and published on April 8, 2002 and is constantly updated, this technology specifies an interface for wireless metropolitan networks (WMAN) and is under control of the WiMAX Forum, which is a group of companies responsible for the dissipation of this technology in the world, the great benefit of this standard is to offer broadband Internet connection in areas where there is no infrastructure such as fiber optics that has a cost higher. The main purpose of this paper is to present the theoretical and technical characteristics of this technology for both the standard for fixed and mobile standard, regulation of frequency bands by the FCC and description of the physical layer, through to basic concepts are used in many other types of radio link and technologies have been adapted and updated for this little-known standard, allowing a greater range and speed, which are specified and differentiate these advancements is one of the contributions of the work done here. After the theoretical conceptualization stage, a real case study has been inserted in this work to demonstrate the effectiveness of this technology deployed. The idea of presenting this case study is linked to a better view of the use of standard in the market, nationwide

Desenvolvimento de sistema para sísmica up-hole em conjunto com o ensaio SPT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos de descontinuidades na propagação de ondas em estruturas unidimensionais

Pós-graduação em Engenharia Mecânica - FEIS

Estudo de propagação de ondas em planície de inundação para elaboração de plano de ação emergencial de barragens: UHE Três irmãos estudo de caso

Pós-graduação em Engenharia Civil - FEIS

Ensaios não-destrutivos de propagação de ondas em toras e madeira serrada de Pinus. taeda L.

In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on condition. P. taeda L wood (43 years old trees) from Horto Florestal of Manduri (latitude 230 00’ south, longitude 400 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better ju regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, cons right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences between the velocity of stress waves at juvenile wood, mature wood and pith regions. Keywords: stress wave method, velocity 17 destrutivos de propagação da propagação de ondas de tensão em toras e madeira serrada de taeda L. Hernando Alfonso Lara Palma - Universidade Estadual Paulista Faculdade de Ciências Agronômicas – FCA/UNESP – Botucatu - SP, e-mail: awballarin@fca.unesp.br Luiz Antonio Vasques Hellmeister - Universidade Estadual Paulista - Faculdade de Arquitetura, FAAC/UNESP – Bauru - SP, e-mail: hellmeister@faac.unesp.br Este trabalho teve como objetivo analisar a influência do tipo de lenho, da posição da tora ao longo do fuste e das dimensões das peças desdobradas, na velocidade de as de tensão (Stress wave method), na condição de madeira verde. P. taeda L., originária de árvores de plantio do Horto Florestal de SP., com idade aproximada de 43 anos, pela facilidade de identificação dos anéis imento e demarcação das regiões de madeira adulta e madeira juvenil. Foram amostradas 6 árvores distintas, escolhidas ao acaso do talhão selecionado. De cada árvore foram retiradas 4 toras com comprimento de 2,5 m cada. Foram demarcadas nas toras a ha central (8 cm de espessura) e 4 tábuas laterais (espessura comercial de 2,5 cm), sendo duas à esquerda e duas à direita da prancha central. Foram avaliadas as relações existentes entre as velocidades de propagação das ondas de tensão na madeira íntegra (toras) e desdobrada (pranchas e tábuas), na condição de madeira verde, nas três regiões distintas do lenho: medula, madeira adulta e madeira juvenil. A análise comparativa dos resultados revelou a concordância entre as velocidades antes e após o desdobr madeira. Houve diferenciação estatisticamente significativa entre as velocidades de propagação das ondas de tensão nos lenhos adulto, juvenil e na medula. -destrutivos, método das ondas de tensão, Pinus taeda stress wave tests on green logs and lumber of Pinus taeda In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on L wood (43 years old trees) from Horto Florestal of Manduri (latitude 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better juvenile and mature wood regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, considering 2 boards on the left and 2 at the right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood, juvenile wood and pith). Comparative analyses of results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences ty of stress waves at juvenile wood, mature wood and pith regions

Recuperação de perfis atmosféricos a partir de ocultação GPS: fundamentos, implementação e análise de resultados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Redes neurais artificiais artmap-fuzzy aplicadas ao estudo de agitação marítima e ondas de lagos

Pós-graduação em Engenharia Elétrica - FEIS

Das ondas do rádio ao papel dos jornais: desenvolvimento da radiodifusão e autonomia política da imprensa no Brasil, 1931-1937

Pós-graduação em História - FCLAS

Inspeção de materiais compósitos utilizando ondas acústicas guiadas

Pós-graduação em Engenharia Elétrica - FEIS

Detecção de danos em estruturas guiadas usando ondas de alta frequência

Pós-graduação em Engenharia Mecânica - FEIS

A arte nas ondas do rádio: ações e procedimentos para esta prática

This paper proposes an extension of the personal experience of the listener through radio. The radio, because it is a medium of reaching, disseminating and having considerable accessibilities towards the production of its contents, and if exploited, could very well combine functionality with aesthetics in the production and broadcasting of programs, something that makes the radio not only a means for transmission of information. In the production of dramatic art, for example, the use of other elements, such as sound effects, may suggest form and consistency to the object described during the practice of radio utterance. The proper combination of function and aesthetic in music, sound effects and voiceover radio can change the mood of the listener and even promote their creativity.

Aplicação de sensor de deslocamento angular em fibra óptica para medição de concentração de líquidos via ondas acústicas guiadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propagação de Camellia sinensis: efeito do genótipo, estaca, substrato, recipiente e ácido indolbutírico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propagação de jambeiro vermelho (Syzygium malaccense L.) por estaquia de ramos herbáceos

The consumption of exotic fruits has been showing accentuated increase and the cultivated area is in expansion, generating demand for adequate culturing techniques. The Malay apple (Syzygium malaccense), with probable origin in India, has a fruit widely known and appreciated in the North and Northeasthern Brazilian states. The Malay apple tree is extremely tall and has a long juvenile period when propagated by seed, making its vegetative multiplication is desirable, to anticipate the productive period and decrease its size, and also to obtain uniform orchards. The experiment was conducted at UNESP/FCAV, Jaboticabal Campus, using Malay apple herbaceous cuttings subjected to treatments with indol butyric acid (IBA) (0; 1,000; 3,000 and 5,000 mgL(-1)) and cuttings with and without basal incision. The variables analyzed were percentage of survival and rooting of the cuttings, number and mean length of roots per cutting. The experiment was conducted under CRB on a factorial scheme (4 X 2) with 4 replicates constituted by 10 cuttings each. Data were analyzed by Tukey's mean test at 5% probability. The vegetative propagation by rooting of herbaceous cuttings of the Malay apple is possible, however, both IBA treatments and basal incision have not shown significant effect on the analyzed variables.

Influência da fonte material e do tempo de cura na propagação vegetativa da pitaya vermelha (Hylocereus undatus Haw)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)