Thermal characterization of solid lipid nanoparticles containing praziquantel

Solid lipid nanoparticles (SLNs), loaded and unloaded with praziquantel (PRZ-load SLN and PRZ-unload SLN) were prepared by two different procedures: (a) oil-in-water hot microemulsion method, obtaining at 70 degrees C an optically transparent blend composed of surfactant, co-surfactant, and water; and (b) oil-in-water microemulsion method, dissolving the lipid in an immiscible organic solvent, emulsified in water containing surfactants and co-surfactant, and then evaporated under reduced pressure at 50 degrees C. The mean diameter, polydispersity index (PdI), and zeta potential were 187 to 665 nm, 0.300 to 0.655, and -25 to -28 mV respectively, depending on the preparation method. The components, binary mixture, SLNs loaded and unloaded with PRZ, and physical mixture were evaluated by differential scanning calorimetry (DSC) and thermogravimetry (TG). The non-isothermal isoconversional Flynn-Wall-Ozawa method was used to determine the kinetic parameters associated with the thermal decomposition of the samples. The experimental data indicated a linear relationship between the apparent activation energy E and the pre-exponential factor A, also called the kinetic compensation effect (KCE), allowing us to determine the stability with respect to the preparation method. Loading with PRZ increased the thermal stability of the SLNs.

Activation energy for the reverse eutectoid reaction in hypo-eutectoid Cu-Al alloys

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de cinética não-isotérmica da reação eutetóide em ligas de 'CU'-'AL' com adições de 'AG'

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Application of Nonisothermal Cure Kinetics to the Interaction of Poly(ethylene terephthalate) with Alkyd Resin Varnish

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A nonisothermal study of the kinetics of the nanoporosity elimination in sonogels-derived silica xerogels

A nonisothermal study of the kinetics of the nanoporosity elimination in monolithic silica xerogels, prepared from acid and ultrasound catalyzed hydrolysis of tetraethylortosilicate (TEOS), has been carried out by means of in situ linear shrinkage measurements performed with different heating rates. The study could be applied up to almost alpha similar to 0.6 of the volume fraction alpha of eliminated pores. The activation energy was found increasing from about 3.2 x 10(2) kJ/mol for alpha similar to 0.06 up to about 4.4 x 10(2) kJ/mol for alpha. similar to 0.44. The sintering process accompanying the nanopore elimination in this set of xerogels is in agreement with a viscous flux sintering process with the hydroxyl content diminishing with the volume fraction of eliminated pores. All the volume fraction of eliminated pores versus temperature (T) curves can be matched onto a unique curve with an appropriate rescaling of the T axis, independent of the heating rate. This scaling property suggests that the path of sintering seems the same, regardless of the heating rate; the difference is that the rate is faster at higher temperature.

Application of non-isothermal cure kinetics on the interaction of poly(ethylene terephthalate) - Alkyd resin paints

Samples of paint (P), reused PET (PET-R) and paint/PET-R mixtures (PPET-R) were evaluated using DSC to verify their physical-chemical properties and thermal behavior. Films from paints and PPET-R are visually similar. It was possible to establish that the maximum amount of PET-R that can be added to paint without significantly altering its filming properties is 2%. The cure process (80-203°C) was identified through DSC curves. The kinetic parameters, activation energy (E a) and Arrhenius parameters (A) for the samples containing 0.5 to 1% of PET-R, were calculated using the Flynn-Wall-Ozawa isoconversional method. It was observed that for greater amounts of PET-R added, there is a decrease in the E a values for the cure process. A Kinetic compensation effect (KCE), represented by the equation InA=-2.70+0.31E a was observed for all the samples. The most suitable kinetic model to describe this cure process is the autocatalytic Šesták-Berggreen, model applied to heterogeneous systems. © 2007 Springer Science+Business Media, LLC.

Kinetics and Adsorption Isotherms of Bisphenol A, Estrone, 17 beta-Estradiol, and 17 alpha-Ethinylestradiol in Tropical Sediment Samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal Decomposition Kinetics of Humic Substances Extracted from Mid-Rio Negro (Amazon Basin) Soil Samples

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The kinetics of donor cell mtDNA in embryonic and somatic donor cell-derived bovine embryos

The mechanisms controlling the outcome of donor cell-derived mitochondrial DNA (mtDNA) in cloned animals remain largely unknown. This research was designed to investigate the kinetics of somatic and embryonic mtDNA in reconstructed bovine embryos during preimplantation development, as well as in cloned animals. The experiment involved two different procedures of embryo reconstruction and their evaluation at five distinct phases of embryo development to measure the proportion of donor cell mtDNA (Bos indicus), as well as the segregation of this mtDNA during cleavage. The ratio of donor cell (B. indicus) to host oocyte (B. taurus) mtDNA (heteroplasmy) from blastomere- (NT-B) and fibroblast- (NT-F) reconstructed embryos was estimated using an allele-specific PCR with fluorochrome-stained specific primers in each sampled blastomere, in whole blastocysts, and in the tissues of a fibroblast-derived newborn clone. NT-B zygotes and blastocysts show similar levels of heteroplasmy (11.0% and 14.0%, respectively), despite a significant decrease at the 9-16 cell stage (5.8%; p < 0.05). Heteroplasmy levels in NT-F reconstructed zygotes, however, increased from an initial low level (4.7%), to 12.9% (p < 0.05) at the 9-16 cell stage. The NT-F blastocysts contained low levels of heteroplasmy (2.2%) and no somatic-derived mtDNA was detected in the gametes or the tissues of the newborn calf cloned. These results suggest that, in contrast to the mtDNA of blastomeres, that of somatic cells either undergoes replication or escapes degradation during cleavage, although it is degraded later after the blastocyst stage or lost during somatic development, as revealed by the lack of donor cell mtDNA at birth.

The effects of macromolecular and serum supplements and oxygen tension during bovine in vitro procedures on kinetics of oocyte maturation and embryo development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Demecolcine Effects on Microtubule Kinetics and on Chemically Assisted Enucleation of Bovine Oocytes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinetics of cellular component in inflammatory response induced by different stimuli in the swim bladder of pacu, Piaractus mesopotamicus Holmberg 1887 (Characidae)

The present study assessed the kinetics of cell accumulation at the site of inflammation induced by thioglycolate, Escherichia coli lipopolysaccharide (LPS) and heat-inactivated Aeromonas hydrophila, in the pacu, Piaractus mesopotamicus (Characidae), swim bladder. A quantitative, as well as qualitative, assessment was done of all the cells present in the exudate at 6, 24, and 48 h (n = 8) after inoculation of inflammatory agents. The results show that the thioglycolate was the irritant to induce higher total inflammatory cell accumulation when compared to the control group, 6 h after insult (P < 0.05). Inoculation of heat-inactivated Aeromonas hydrophila induced progressive accumulation of total inflammatory cells, with cell number peaking after 24 h and being significantly higher than observed in the other groups (P < 0.05). Injection of LPS also induced greater cell accumulation when compared to the control group (P < 0.05), although in lower numbers than those induced by the other two irritants. All irritants injected induced significantly greater accumulation of lymphocytes and thrombocytes when compared to the control group (P < 0.05).

Kinetics of chronic inflammation in Nile tilapia fed n-3 and n-6 essential fatty acids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digital monitoring of mycelium growth kinetics and vigor of shiitake (Lentinula edodes (Berk.) Pegler) on agar medium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dehydration of dedo de moça pepper: kinetics and phytochemical concentration

A pimenta vermelha é rica em vitamina C e outros fitoquímicos e pode ser consumida como produto desidratado. A avaliação das melhores condições de secagem pode garantir melhor qualidade do produto. Assim, o objetivo deste trabalho foi estudar o efeito da temperatura do ar de secagem (55, 65, 75 ºC) sobre a cinética de secagem, conteúdos de vitamina C e fenólicos totais e cor do produto desidratado, comparando-os à pimenta in natura. A desidratação foi feita por convecção forçada em estufa. A cinética de secagem foi determinada por pesagens periódicas até peso constante. A umidade da pimenta in natura foi de aproximadamente 86%. As curvas de secagem foram ajustadas por três modelos diferentes, avaliados na literatura. O modelo de Page apresentou o melhor ajuste para este processo. A análise de variância mostrou que a temperatura de secagem influenciou significativamente (p < 0,05) os parâmetros de qualidade (conteúdo de vitamina C, conteúdo de fenólicos totais, cor) da pimenta desidratada quando comparados aos da pimenta in natura. Após a secagem, a retenção de vitamina C aumentou com a redução da temperatura de secagem. de maneira geral, a qualidade do produto foi favorecida na secagem com menor temperatura, devido à redução nas perdas de compostos bioativos.