Grander system: A new technology to reduce surface tension of adhesive systems in dentistry

Background. Reduced surface tension of liquids results in higher surface wetting ability and diffusivity by the substrate. Objectives. The objective of this study was to evaluate the influence of the Grander Technology in reducing the surface tension of adhesive systems. Methods. Two adhesive systems (self-etch and total-etch) were modified by physical contact with the Grander system Flexible unit to revitalize water, for 48 h. Surface tension of adhesive systems and water in normal and grander-modified conditions was measured with a goniometer. Results. The results showed a reduction of surface tension for all conditions grander-modified between 3-15%. Conclusions. Grander Technology was effective in reducing the surface tension of the Single Bond and Clearfil SE Bond adhesive systems. Clinical significance. Grander technology was employed to restructure the molecular structure of water-based adhesive systems, which can increase their wetness capacity and therefore ensure a greater diffusibility.

The influence of leukocytospermia on the outcomes of assisted reproductive technology

Background: It is not well established whether the increased number of leukocytes in the seminal fluid impairs the outcomes of assisted reproductive technology (ART). This investigation analysed the outcomes of the intracytoplasmic sperm injection (ICSI) and intracytoplasmic morphologically selected sperm injection (IMSI) cycles in couples in which the male partner exhibited leukocytospermia.Methods: A total of 100 cycles in 100 couples were included in this study. For the ICSI or IMSI procedures, the patients were divided into two groups according to the presence or absence of leukocytospermia and then matched by (female) age:- ICSI: Group I (n = 25): Leukocytospermia - semen samples with a leukocyte count of greater than or equal to 1 x 10(6)/mL; and Group II (n = 25): Non-leukocytospermia - semen samples with a leukocyte count < 1 x 10(6)/mL.- IMSI: Group I (n = 25): Leukocytospermia; and Group II (n = 25): Non-leukocytospermia.The endpoints included the rates of fertilisation, implantation, clinical pregnancy, miscarriage, ongoing pregnancy and live birth. Student's t-tests, Mann-Whitney tests and Chi-square tests were performed, and P < 0.05 was considered significant.Results: The data from the ICSI groups showed that leukocytospermia did not have a negative influence on the rates of fertilisation (Group I: 57.9+/-30.2%, Group II: 61.9+/-27.7%; P = 0.74), implantation (Group I: 12.3%; Group II: 13.5%; P = 0.93), clinical pregnancy (Group I: 24%; Group II: 24%; P = 1.0), miscarriage ( Group I: 0, Group II: 0), ongoing pregnancy (Group I: 24%; Group II: 24%; P = 1.0), or live births (Group I: 24%; Group II: 24%; P = 1.0). Similarly, the data from the IMSI groups also showed that the leukocytospermia did not have a negative influence on the rates of fertilisation (Group I: 67.6+/-24.6%, Group II: 59.5+/-28.1%; P = 0.36), implantation (Group I: 17.5%; Group II: 16.7%; P = 0.90), clinical pregnancy (Group I: 28%; Group II: 24%; P = 1.0), miscarriage (Group I: 14.3%; Group II: 0; P = 0.33), ongoing pregnancy (Group I: 24%; Group II: 24%; P = 1.0), or live births (Group I: 24%, 6/25; Group II: 24%, 6/25; P = 1.0).Conclusions: The results indicate that the leukocytospermia may not have a negative effect on the outcomes of ICSI or IMSI cycles. Nevertheless, it seems that it is necessary to more precisely determine the effects, if any, of seminal leukocytes on fertilisation and implantation processes. Such efforts will help to establish a more reliable leukocyte threshold, which could eventually demonstrate whether there is a negative influence on the ART procedures.

A First approach on the new transmission system in northern Brazil

This article shows an analysis of the electrical parameters of a three-phase transmission line section using a relatively new design for steel towers characterized by 280 meters high. These main features, the height of the line conductors and distance between them, are intrinsically related to the longitudinal and transversal parameters of the line. By this means, an analysis was carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 440-kV line through a wide range of frequencies and a variable soil resistivity. © 2012 The Institution of Engineering and Technology.

Índice preditor de reserva ovariana (ORPI) para controle de estimulação ovariana individualizado

Objective: to expand the evaluation of a new ovarian response prediction index (ORPI), which was based on the AMH, AFC and age, and to verify its reability as a predictor of ovarian response to stimulation in assisted reproductive technology (ART) cycles. Methods: A total of 129 patients enrolled in the ICSI programme were included. The ORPI values were calculated by multiplying the AMH level (ng/ml) by the number of antral follicles (2-9 mm), and the result was divided by the age (years) of the patient (ORPI=(AMH × AFC)/Patient age). Results: Spearman's test revealed significant correlations (P<0.0001) between the ORPI and the number of oocytes collected and the number of follicles. Logistic regression revealed that ORPI values were significantly associated with the likelihood of collecting ≥4 oocytes (OR=45.56), ≥4 MII oocytes (OR=6.01) and ≥15 oocytes (OR=6.15; P<0.0001). Based on the ROC curves, the ORPI accurately predicted a low ovarian response (<4 oocytes retrieved; area under the curve (AUC):0.91), collection of ≥4 MII oocytes (AUC:0.85) and an excessive ovarian response (≥15 oocytes retrieved; AUC:0.89). Conclusions: The ORPI exhibited an excellent ability to predict a low ovarian response and a good ability to predict a collection of ≥ 4 MII oocytes, an excessive ovarian response. The ORPI might be used to improve the cost-benefit ratio of ovarian stimulation regimens by guiding the selection of medications and by modulating the doses and regimens according to the actual needs of the patients. © Todos os direitos reservados a SBRA - Sociedade Brasileira de Reprodução Assistida.

Projeção de vídeo no ambiente urbano: a cidade como tela

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dos bytes aos átomos: reflexões e experimentações artísticas sobre o universo da impressão 3D

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estúdio Ghibli: um aparato sobre as técnicas ilustrativas e filosofia oriental dos principais longas metragens de Hayao Miyazaki

In front of the vast and widespread use of new technology in 3D animation currently, this research aims to give an overview adjacent to major film productions with Studio Ghibli and its main director/animator: Hayao Miyazaki. Showing up as an interesting exception to worldwide success, the Ghibli feature films are made with the predominance of 2D hand-drawn art. Its process dates back to the first animations created in the early twentieth century, though such tools have been “overcome” by big studios like Walt Disney, Pixar and Dreamworks, the works of Miyazaki still get considerable highlight, preferring the pencil and paper than the computer. With the aid of some authors in particular as McCloud and the founders of Anima Mundi, and other theorists of design and subjective philosophy, some analyzes are mapped to better understand the connection between the work of Miyazaki and his contribution to the field of illustration and originality as a whole. The objective is to find the key points of Ghibli animations which will drive new parameters between creativity, illustration and Western and Eastern praxis.

Comparative analysis between a CAD model design and physical models obtained by manufacturing additive technologies using optical scan

This article presents a detailed study of the application of different additive manufacturing technologies (sintering process, three-dimensional printing, extrusion and stereolithographic process), in the design process of a complex geometry model and its moving parts. The fabrication sequence was evaluated in terms of pre-processing conditions (model generation and model STL SLI), generation strategy and physical model post-processing operations. Dimensional verification of the obtained models was undertook by projecting structured light (optical scan), a relatively new technology of main importance for metrology and reverse engineering. Studies were done in certain manufacturing time and production costs, which allowed the definition of an more comprehensive evaluation matrix of additive technologies.

Analysis of the Electrical Characteristics of an Alternative Solution for the Brazilian-Amazon Transmission System

This article analyzes the electrical parameters of a 3-phase transmission line using a 280-m-high steel tower that has been proposed for the Amazon transmission system in Brazil. The height of the line conductors and the distance between them are intrinsically related to the longitudinal and transverse parameters of the line. Hence, an accurate study is carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 3-phase 440-kV line, considering a wide range of frequencies and variable soil resistivity. First, a brief review of the fundamental theory of line parameters is presented. In addition, by using a digital line model, simulations are carried out in the time domain to analyze possible and critical over-voltage transients on the proposed line representation.

Effects of feeding a multivalent polyclonal antibody preparation on feedlot performance, carcass characteristics, rumenitis, and blood gas profile in Bos indicus biotype yearling bulls

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photocatalytic and photoelectrochemical treatment effects on the killing of escherichia coli cells

In this study, we report the efficiency of photocatalytic and photoelectrochemical treatment using titanium dioxide as semiconductor and its applications in water disinfection. It was compared the efficiency of the two methods on the killing of E.coli cells. The photoelectrochemical treatment with electric field enhancement showed a good result and could be a new technology to water treatment.

Decrease of the DNA damage levels after sperm preparation by layering method

The aim of this prospective study was to determine the DNA fragmentation levels before and after sperm preparation by layering method. A total of 78 patients submitted to assisted reproduction technology (ART) for infertility treatment were evaluated. Ejaculated spermatozoa were obtained by masturbation on the day of ART procedure. The evaluation of DNA fragmentation was performed in the fresh semen and after preparation by a layering method, respectively. After washing with PBS, the sperm pellets were smears and then processed for the terminal deoxyribonucleotidyl transferase (TdT)-mediated dUTP nick-end labelling (TUNEL) assay that was performed using a Cell Death Detection Kit with tetramethylrhodamine-labelled dUTP. For quantitative evaluation, 200 spermatozoa in randomly selected areas on microscope slides were evaluated and the percentage of TUNEL positive spermatozoa was determined. If ≥20% of selected sperm were TUNEL positive, the exam was considered abnormal. The mean percentage of DNA sperm fragmentation before sperm preparation was 17±8.3% and after 7.8±6.5% (p<0.0001). The exam was considered normal in 49 patients before preparation and in 73 patients after (p<0.0001). The sperm preparation with a layering method for the ART procedure is effective to select sperm with a significant decrease of the DNA damage.

Blade design and forming for fans using finite elements

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concerning referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. However, since then, the defied solutions have pointed to aerodynamic disadvantages or have seemed nonappropriate in these conditions. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good adaptation to temperatures higher than 400°C, particularly exposed to temperatures of gas exhaust from tunnels in fire situation. Furthermore, it presents a very good resistance to corrosion and posterior welding and pressing, due to its alloyed elements. The innovation is centered in the process of a deep drawing of metallic shells and posterior welding, in order to keep the ideal aerodynamic superficies for the fan ideal performance. On the other hand, the finite element method, through the elasto-plastic software COSMOS permitted the verification of the thickness and structural stability of the blade in relation to the aerodynamic efforts established in the project. In addition, it is not advisable the fabrication of blades with variable localized thickness not even, non-uniform ones, due to the verified concentration of tensions and the difficulties observed in the forming. In this way, this study recommends the construction of blades with uniform variations of thickness. © 2007 Springer.

Mare's folliculogenesis: Assessment of ovarian and perifollicular vascular perfusion by doppler ultrasound

Background: Ultrasound Doppler is a new technology that has recently been used in large animal reproduction. As the conventional ultrasound (B-mode) it is a noninvasive technique, but with the advantage of allows the assessment of the hemodynamic of reproductive tract in real time. The observation of important features of the vascularization and changes that occur during physiological processes that were not previously seen on B-mode encourage a reassessment of the concepts already established on the events of the reproductive physiology of animals and their applications. Review: In attempt to re-understand the equine reproductive physiology and finding practical uses to this new technique, authors showed that, during the follicular deviation, features are observed by Doppler before being observed under B-mode ultrasound like changes in the speed of the blood flow two days before deviation of the follicle size and one day before the increase in blood flow area of the follicular wall. According to another study ovulation is characterized by a decreased blood flow of the follicular wall in the last four hours preceding it, as well as the serration of the granulosa layer and formation of a non vascularized apex, but in our ongoing study, the ability to decrease the vascularity was not found. Very vascularized follicles are associated with higher rates of oocyte maturation and pregnant that does less vascularized follicles in the preovulatory phase. Those follicles that have septated evacuation (or prolonged) showed more vascularization and serration of the granulosa one hour before ovulation than follicles that ovulate normally, and this vascularization includes the apex of the follicle, the follicular wall portion that is not vascularized in normal ovulation. Another study reported that hemorrhagic follicles have better vascularization of the follicular wall on the days preceding ovulation than follicles destined to ovulate. Some authors also showed that anovulatory follicles grow in size at the same rate as ovulatory follicles, but the percentage of vascularization of its wall is much smaller at 35 mm. Another study characterized that the vascular wall of the follicle that results in the first ovulation of the year is much smaller on the day before ovulation than the number of vessels present in a follicle that will ovulate in the middle of the breeding season. In these cases, the use of Doppler ultrasound can help to prevent economic losses as insemination of mares in cycles that are not able of resulting in pregnancy. This review aims to gather the information found in the literature about the characteristics of follicular hemodynamic of mares taking into account moments of deviation in follicle size, ovulation, ovulation failure and follicular viability. Conclusion: The Doppler technology has the potential to provide important information about the follicular environment and thus be used in practice in search of the perfect equine reproductive management, achieving better utilization of genetic material and increasing the financial return. The use of this new tool opens a large area for several interesting studies that will contribute to the knowledge of the physiological events of the mare for that this technique can soon be effectively applied.

Introduction of a non-conventional solution for Amazon transmission system: Analysis of the electric aspects

This article shows an analysis of the longitudinal electric parameters of a three-phase transmission line/section using a 280-meter high steel tower. This characteristic, the height of the line conductors and distance between them, are intrinsic related to the longitudinal and transversal parameters of the line. By this means, an accurate study was carried out in order to show the electric variations between a transmission line using the new technology and a three-phase conventional 440 kV line for a wide range of frequencies and a variable soil resistivity. In addition, by using a digital line model, simulations are carried out in time domain to analyze critical overvoltage transients on the studied line. © 2011 IEEE.