PHENYLBUTANOID AND TAXANE-LIKE METABOLITES FROM NEEDLES OF TAXUS-BREVIFOLIA

The structures for brevifoliol and three baccatin VI derivatives were revised to possess the novel 11(15 --> 1)-abeotaxane tricylic skeleton based on X-ray crystallographic studies. Four more new rearranged taxane derivatives related to brevifoliol and the unusual phenylbutanoid, (-)-rhododendrol, were isolated from the needles of Taxus breuifolia. Their structures were established as 10 beta-benzoxy-5 alpha-(3'-dimethylamino-3'-phenyl)-propanoxy-1 beta-hydroxy- 7 beta,9 alpha,13 alpha-triacetoxy-11(15 --> 1)-abeotaxa-4(20),11-diene; 10 beta-benzoxy-1 beta-hydroxy-5 alpha-(3'-methylamino-3'-phenyl)- propanoxy-7 beta,9 alpha,l3 alpha-triacetoxy-11(15 --> 1)-abeotaxa-4(20),11-diene; 10 beta-benzoxy-5 alpha-cinnamoxy-1 beta-hydroxy-7 beta,9 alpha,13 alpha-triacetoxy-1 1(15 --> 1)-abeotaxa-4(20),11-diene; 10 beta-benzoxy-1 beta,5 alpha-dihydroxy-7 beta,9 alpha,13 alpha-triacetoxy-11(15 --> 1)-abeotaxa-4(20),11-diene and 2(R)-hydroxy-4-(4'-hydroxyphenyl)-butane.

Zirconia needles synthesized inside hexagonal swollen liquid crystals

We report the synthesis of zirconia microneedles by the direct nucleation of particles inside a hexagonal swollen liquid crystal (SLC) (cell parameter a = 27 nm) prepared by mixing with the proper ratio, an aqueous solution of sulfated zirconium colloids, a cationic surfactant (cetylpyridinium chloride), cychlohexane as swelling agent with an oil over water ratio of 2.5 (vol.), and 1-pentanol as cosurfactant. After a slow crystallogenesis that can be enhanced by an initial induction step under moderate temperature, particles in the centimeter range can be obtained, with a very high shape ratio (over 100). These particles are made of crystalline octahydrate zirconium oxychloride containing pores of 20 nm diameter, aligned along the main axis of the liquid crystal, as the fingerprint of the oil cylinders present in the hexagonal phase. The morphology of these particles confirms that the shaping mechanism is based on true liquid crystal templating (TLCT). Further thermal treatment of these particles, after extraction from the SLC, leads to the crystallization of zirconia with the same needlelike morphology as the zirconium oxychloride.

Controlling the growth of zirconia needles precursor from a liquid crystal template

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efficacy of four irrigation needles in cleaning the apical third of root canals

This study aimed to evaluate the influence of irrigation needle gauge and design, and the final root canal diameter on the apical cleaning efficacy. Twelve human mandibular incisors were used. At different stages of root canal widening (sizes 20, 30 and 40 K-files), root canals were filled with radiopaque contrast medium. Four different needles were evaluated: 23G with side opening, 22G with apical opening, 30G with side opening and 30G with apical opening. Irrigation was carried out with 2 mL distilled water. The same tooth was radiographed with a digital system several times to assess the four types of needle in those three stages of canal widening. Pre-irrigation (canals filled with contrast) and post-irrigation (canals with remaining contrast) images were submitted to digital subtraction using the Adobe Photoshop CS4 program. Pre-irrigation (filled with contrast) and subtracted (cleaned by irrigation) areas were outlined by a trained and blinded operator using the Image Tool 3.0 software. Their ratio was calculated to express the percentage of apical cleaning in each stage of canal widening (sizes 20, 30 and 40 K-files) with each of the four needles. Data obtained were subjected to one-way ANOVA and Tukey's tests. The 30G needles with side and apical opening promoted better apical cleaning at all stages of root canal widening (p<0.05). In conclusion, smaller diameter needles were more efficacious in cleaning the apical third of the root canals, regardless of their design.

Adherence to standard precautions from the standpoint of the Health Belief Model: the practice of recapping needles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of pressure-assisted heat treatment on photoluminescence emission of α-Bi2O3 needles

Materials with high photoluminescence (PL) intensity can potentially be used in optical and electronic devices. Although the PL properties of bismuth(III) oxide with a monoclinic crystal structure (α-Bi2O3) have been explored in the past few years, methods of increasing PL emission intensity and information relating PL emission to structural defects are scarce. This research evaluated the effect of a pressure-assisted heat treatment (PAHT) on the PL properties of α-Bi2O3 with a needlelike morphology, which was synthesized via a microwave-assisted hydrothermal (MAH) method. PAHT caused an angular increase between the [BiO6]-[BiO6] clusters of α-Bi2O3, resulting in a significant increase in the PL emission intensity. The Raman and XPS spectra also showed that the α-Bi2O3 PL emissions in the low-energy region (below ∼2.1 eV) are attributed to oxygen vacancies that form defect donor states. The experimental results are in good agreement with first-principles total-energy calculations that were carried out within periodic density functional theory (DFT).

Efficacy of linear and convex transducers for ultrasound-guided transvaginal follicle aspiration

A new device was developed to hold linear transducers for transvaginal follicle aspiration. Efficacy of follicle aspiration was compared using a linear 6 MHz and a convex 5 MHz transducer. Fifty-five cows were submitted to follicle aspiration at random days of the estrous cycle. Aspirations were conducted with linear (n = 28) and convex (n = 38) transducers with 18 G needles at a negative pressure corresponding to 13 ml H2O/min. A greater number of follicles were aspirated using convex than to linear probe (12.4 versus 7.8, respectively, P < 0.05). Mean number of oocytes and recovery rates were similar for convex (5.4 and 48.6%) and linear (4.6 and 59.3%) transducers. Limited space between the linear transducer and needle guide restricted access to some portions of the ovary, reducing the number of follicles aspirated using a linear transducer. The newly developed adaptor allowed greater stability, holding the ovaries firmly against the linear transducer. This diminished mobility permitted a similar number of oocytes to be recovered with both transducers. In conclusion, this new adaptor provided a low cost alternative for routine follicle aspiration and oocyte recovery in cattle. (C) 2002 Elsevier B.V. All rights reserved.

Acupuntura: bases científicas e aplicações

A acupuntura visa à terapia e à cura das enfermidades pela aplicação de estímulos através da pele, com a inserção de agulhas em pontos específicos. Essa técnica esteve isolada do mundo ocidental durante milênios, distanciando sua forma de raciocínio e linguagem da cultura ocidental. Isto restringe sua aceitação no Ocidente, sendo considerada mística e sem base científica. Além disso, a prática da acupuntura no Ocidente se depara com deficiências no ensino e difusão científica. Porém, a eficácia dessa terapia levou a Organização Mundial de Saúde a listar enfermidades que podem ser tratadas pela acupuntura e, recentemente, essa técnica foi reconhecida como especialidade médica veterinária no Brasil. A pesquisa da acupuntura reveste-se, portanto, de grande interesse, na medida em que poderá traduzir conhecimentos milenares, contribuindo para sua aceitação e incorporação.

Understanding the Crystallization Mechanism of a Wollastonite Base Glass Using Isoconversional, IKP Methods and Master Plots

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pharmacokinetics of intraosseous and central venous drug delivery during cardiopulmonary resuscitation

We compared the pharmacokinetics of intraosseous (IO) drug delivery via tibia or sternum, with central venous (CV) drug delivery during cardiopulmonary resuscitation (CPR).Methods: CPR of anesthetized KCl arrest swine was initiated 8 min post arrest. Evans blue and indocyanine green, each were simultaneously injected as a bolus with adrenaline through IO sternal and tibial needles, respectively, n = 7. In second group (n = 6) simultaneous IO sternal and IV central venous (CV) injections were made.Results: Peak arterial blood concentrations were achieved faster for sternal IO vs. tibial IO administration (53 +/- 11 s vs. 107 +/- 27 s, p = 0.03). Tibial IO dose delivered was 65% of sternal administration (p = 0.003). Time to peak blood concentration was similar for sternal IO and CV administration (97 +/- 17 s vs. 70 +/- 12 s, respectively; p = 0.17) with total dose delivered of sternal being 86% of the dose delivered via CV (p = 0.22).Conclusions: IO drug administrations via either the sternum or tibia were effective during CPR in anesthetized swine. However, IO drug administration via the sternum was significantly faster and delivered a larger dose. (C) 2011 Elsevier B.V. All rights reserved.

pH, Calcium Ion Release, and Setting Time of an Experimental Mineral Trioxide Aggregate-based Root Canal Sealer

Introduction: An experimental mineral trioxide aggregate sealer (MTAS) has been developed for use as a root canal sealer. The aim of this study was to evaluate the setting time, pH, and calcium ion release of MTAS compared with white Portland cement (CPB-40; Votorantin Cimentos, Camargo Correa SA, Pedro Leopoldo, MG, Brazil), white MTA Angelus (MTA; Angelus, Londrina, PR, Brazil), and AH Plus (Dentsply DeTrey, Konstanz, Germany). Methods: For the evaluation of setting time, each material was analyzed using Gilmore-type needles. Polyethylene tubes with the materials were immersed in distilled water for the measurement of pH (digital pH meter) and calcium release (atomic absorption spectrophotometry). The evaluations were performed at 3, 6, 12, 24, and 48 hours and 7, 14, and 28 days. Data were analyzed by analysis of variance and the Tukey test at 5% significance level. Results: MTAS showed higher calcium release at all experimental periods, a greater increase in pH up to 48 hours and the longest setting time. Conclusions: MTAS presented favorable properties for its indication as a root canal sealer. (J Endod 2011;37:844-846)

Evaluation of the physical and chemical properties of two commercial and three experimental root-end filling materials

Objective. The aim of this study was to evaluate the pH, calcium release, setting time, and solubility of two commercially available mineral trioxide aggregate (MTA) cements (white MTA Angelus and MTA Bio), and of three experimental cements (light-cured MTA, Portland cement with 20% bismuth oxide and 5% calcium sulfate, and an epoxy resin-based cement).Study design. For evaluation of pH and calcium ion release, polyethylene tubes with 1.0 mm internal diameter and 10.0 mm length were filled with the cements and immediately immersed in flasks containing 10 mL deionized water. After 3, 24, 72, and 168 hours, the tubes were removed and the water from the previous container was measured for its pH and calcium content with a pH meter and an atomic absorption spectrophotometer. For analysis of the setting time, Gilmore needles weighing 100 g and 456.5 g were used, in accordance with the American Society for Testing and Materials specification no. C266-03. Solubility of each cement was also tested.Results. All the cements were alkaline and released calcium ions, with a declining trend over time. After 3 hours, Portland cement + bismuth oxide and MTA Bio had the highest pH and light-cured MTA the lowest. After 1 week, MTA Bio had the highest pH and light-cured MTA and epoxy resin-based cement the lowest. Regarding calcium ion release, after 3 hours, Portland cement + bismuth oxide showed the highest release. After 1 week, MTA Bio had the highest. Epoxy resin-based cement and light-cured MTA had the lowest calcium release in all evaluation periods. Regarding setting times, white MTA Angelus and MTA Bio had the shortest, Portland cement + bismuth oxide had an intermediate setting time, and the epoxy resin-based cement had the longest. The materials that showed the lowest solubility values were the epoxy resin-based cement, Portland cement + bismuth oxide, and light-cured MTA. The highest solubility values were presented in white MTA Angelus and MTA Bio.Conclusions. The white MTA Angelus and MTA Bio had the shortest setting times, higher pH and calcium ion release, and the highest solubility. In contrast, the epoxy resin-based cement and light-cured MTA showed lower values of solubility, pH, and calcium ion release. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010; 110: 250-256)

Simultaneous Determination of Cadmium and Lead in Medicinal Plants Using Graphite Furnace Atomic Absorption Spectrometry and Direct Slurry Sampling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of plant growth regulators in the rooting of Pinus cuttings

O trabalho avaliou o enraizamento de estacas de Pinus caribaea var. hondurensis Morelet sob a ação de diferentes níveis de reguladores vegetais. As estacas foram feitas de brotações de 4 a 6cm de comprimento de mudas de P. caribaea var. hondurensis Morelet com corte bisel na base sendo as acículas basais eliminadas. A base das estacas foram submetidas aos tratamentos por 2 segundos com os seguintes tratamentos: 1- NAA 2000mg L-1; 2- NAA 4000mg L-1; 3- NAA 6000mg L-1; 4- NAA 2000mg L-1 + PBZ 100mg L-1; 5- NAA 4000mg L-1 + PBZ; 6- NAA 6000mg L-1 + PBZ; 7- IBA 2000mg L-1; 8- IBA 4000mg L-1; 9- IBA 6000mg L-1; 10-IBA 2000mg L-1 + PBZ; 11- IBA 4000mg L-1 + PBZ; 12- IBA 6000mg L-1 + PBZ e testemunha. Após os tratamentos as estacas foram plantadas em tubetes contendo 50% de palha de arroz carbonizada e 50% de vermiculita. As avaliações realizadas aos 60 dias após o plantio mostraram que estacas de P. caribaea tratadas com IBA levaram a maior porcentagem de estacas enraizadas que aquelas tratadas com NAA, sendo o mais efetivo, IBA a 4000mg L-1 em conjunto com 100mg L-1 de paclobutrazol.