Haematological and biochemical reference intervals for farmed channel catfish

The reference intervals for biochemical variables and red blood cell indices of healthy intensively bred channel catfish Ictalurus punctatus were determined. The blood variables were determined using standardized clinical methods. The reference intervals (25th and 75th percentiles) were established using a non-parametric method. Reference intervals for plasma glucose, serum total protein, sodium, potassium, calcium, magnesium, chloride concentration, primary and secondary red blood cell indices were established. The haematological and biochemical reference intervals established may allow important clinical decisions about channel catfish. (c) 2007 the Authors Journal compilation (C) 2007 the Fisheries Society of the British Isles.

Effects of different sampling intervals on apparent protein and energy digestibility of common feed ingredients by juvenile oscar fish (Astronotus ocellatus)

O presente estudo avaliou a digestibilidade aparente da proteína e da energia de ingredientes (farelo de soja, farinha de peixe, farelo de trigo e milho) por juvenis de apaiari (Astronotus ocellatus) usando dois diferentes intervalos de coleta (30 min. e 12h). Os 160 juvenis de apaiari utilizados (22,37 ± 3,06 g de peso corporal) foram divididos em quatro tanques rede plásticos e cilíndricos, cada um colocado em um tanque de alimentação de 1.000 L. O experimento foi inteiramente casualizado em esquema fatorial 2 x 4 (2 intervalos de coleta de fezes e 4 ingredientes foram) com quatro repetições. Os testes estatísticos não detectaram efeito da interação entre o intervalo de coleta e tipo de ingrediente nos coeficientes de digestibilidade. O intervalo de coleta não afetou a digestibilidade da proteína e da energia. As características físicas das fezes dos juvenis de apaiari aparentemente as tornam menos sensíveis à perda de nutrientes por lixiviação, permitindo intervalos de coleta maiores. A digestibilidade da proteína dos ingredientes avaliados foi semelhante, mostrando que a digestibilidade aparente de ingredientes animais e vegetais por juvenis de apaiari é eficiente. Os coeficientes de digestibilidade da energia foram maiores para a farinha de peixe e o farelo de soja comparado a farelo de trigo e milho. Ingredientes ricos em carboidratos (farelo de trigo e milho) apresentaram os piores coeficientes de digestibilidade da energia e, portanto, não são usados eficientemente pelos juvenis de apaiari.

Modal transformation applied to double three-phase transmission lines

Double three-phase transmission lines are analyzed in this paper using a modal transformation model. The main attribute of this model is the use of a single real transformation matrix based on line geometrical characteristics and the Clarke matrix. Because of this, for any line point, the electrical values can be accessed for phase domain or mode domain using the considered transformation matrix and without convolution methods. For non-transposed symmetrical lines the errors between the model results and the exact modes are insignificant values. The eigenvector and eigenvalue analyses for transposed lines search the similarities among the three analyzed transposition types and the possible simplifications for a non-transposed case.

Modal transformation analyses for double three-phase transmission lines

Eigenvector and eigenvalue analyses are carried out for double three-phase transmission lines, studying the application of a constant and real phase-mode transformation matrix and the errors of this application to mode line models. Employing some line transposition types, exact results are obtained with a single real transformation matrix based on Clarke's matrix and line geometrical characteristics. It is shown that the proposed technique leads to insignificant errors when a nontransposed case is considered. For both cases, transposed and nontransposed, the access to the electrical values (voltage and current, for example) is provided through a simple matrix multiplication without convolution methods. Using this facility, an interesting model for transmission line analysis is obtained even though the nontransposed case errors are not eliminated. The main advantages of the model are related to the transformation matrix: single, real, frequency independent, and identical for voltage and current.

Decomposição modal de linhas de transmissão a partir do uso de duas matrizes de transformação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alternative Model of Three-Phase Transmission Line Theory-Based Modal Decomposition

In this paper is shown the development of a transmission line, based on discrete circuit elements that provide responses directly in the time domain and phase. This model is valid for ideally transposed rows represent the phases of each of the small line segments are separated in their modes of propagation and the voltage and current are calculated at the modal field. However, the conversion phase-mode-phase is inserted in the state equations which describe the currents and voltages along the line of which there is no need to know the user of the model representation of the theory in the field lines modal.

Alternative proposal for Modal Representation of a Non-transposed Three-Phase Transmission Line with a Vertical Symmetry Plane

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into quasi-modes a, b and zero. After that, Quasi-modes a and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km.

Optimal and robust modal control of a flexible structure using an active dynamic vibration absorber

This paper is concerned with feedback vibration control of a lightly damped flexible structure that has a large number of well-separated modes. A single active electrical dynamic absorber is used to reduce a particular single vibration mode selectively or multiple modes simultaneously. The absorber is realized electrically by feeding back the structural acceleration at one position to a collocated piezoceramic patch actuator via a controller consisting of one or several second order lowpass filters. A simple analytical method is presented to design a modal control filter that is optimal in that it maximally flattens the mobility frequency response of the target mode, as well as robust in that it works within a prescribed maximum control spillover of 2 dB at all frequencies. Experiments are conducted with a free-free beam to demonstrate its ability to control any single mode optimally and robustly. It is also shown that an active absorber with multiple such filters can effectively control multiple modes simultaneously.

Parturition intervals and distributions of parturitions by months of buffalo in Southern and South-eastern Brazil

Reproductive rate is an important component of economic success in livestock production. Parturition interval (IEP) is a direct measure of the productivity of the animal. Long IEP reduce the number of calves produced per year. The objective this study was to determine the distribution of parturitions across month and to evaluate factors affecting IEP. The data included 7,588 parturitions of Murrah, Mediterranean and Carabobo buffalo from 10 herds in Southern and South-eastern Brazil. The analysis of distribution of parturitions evaluated the effects of month, year and their interaction on birth date of calves by using a Chi-Square test in SAS PROC FREQ (SAS Institute, Cary, NC, USA). Parturition intervals (n = 2,630) were evaluated using analysis of variance in SAS PROC GLM. The model for IEP included the fixed effects of season (December to May = 1, June to November = 2), year, season x year, sex of the preceding parturition, age of weaning of the previous calf, and herd. All sources of variation were significant (P<0.0001) except sex of the preceding parturition (P <0.85). The mean IEP was 446.7 +/- 10.4 days, for seasons 1 and 2 IEP were 419.8 +/- 11.3 and 473.6 +/- 40.7 days, respectively, a difference of 54 days. As weaning age increased there was a lengthening of IEP. Buffalo in Brazil showed seasonal parturition with calving concentrated from January to April, although the frequency by month differed across years (P<0.0001). These months also had the lowest calving interval.

The efficacy of a single chain recombinant equine luteinizing hormone (reLH) in mares: Induction of ovulation, hormone profiles, and inter-ovulatory intervals

The objectives of this study were to determine the efficacy of recombinant equine luteinizing hormone (reLH) in shortening the time to ovulation in cycling mares and to determine the effects of treatment on endogenous hormones and inter-ovulatory intervals. In study 1, mares of light horse breeds (3-20 years) were treated with either a vehicle, various doses of reLH, or human chorionic gonadotropin (hCG). Cycling mares were examined by palpation and ultrasound per rectum daily or every 12 h from the time of treatment to ovulation. In studies 2 and 3, jugular blood samples were collected daily or every 12 h from the time of treatment to ovulation for analysis of LH, follicle stimulating hormone (FSH), estradiol-17 beta (E-2), and progesterone (P-4) by radioimmunoassays (RIA). Increasing doses of reLH (0.3, 0.6, 0.75, and 0.9 mg) showed increasing effectiveness at inducing ovulation within 48 h of treatment. Treatments with the 0.75 and 0.9 mg doses of reLH resulted in 90% and 80% ovulation rates, which were similar to hCG treatment (85.7%). Except for the early rise in LH after treatment with 0.5, 0.65, and 1.0 mg of reLH, hormone profiles appeared to be similar between control and treated cycles. Inter-ovulatory intervals were similar between control and treatment cycles. In conclusion, reLH is a reliable and effective ovulatory agent that does not significantly alter endogenous hormone profiles or affect inter-ovulatory intervals.(c) 2007 Elsevier B.V. All rights reserved.

Modal analysis of anisotropic diffused-channel waveguide by a scalar finite element method

A procedure to model optical diffused-channel waveguides is presented in this work. The dielectric waveguides present anisotropic refractive indexes which are calculated from the proton concentration. The proton concentration inside the channel is calculated by the anisotropic 2D-linear diffusion equation and converted to the refractive indexes using mathematical relations obtained from experimental data, the arbitrary refractive index profile is modeled by a. nodal expansion in the base functions. The TE and TM-like propagation properties (effective index) and the electromagnetic fields for well-annealed proton-exchanged (APE) LiNbO3 waveguides are computed by the finite element method.

Influence of Remineralizing Gels on Bleached Enamel Microhardness In Different Time Intervals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sprawl e o modal de transporte motorizado: impactos na cidade de Londrina, PR

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Joint (X)over-bar and R charts with variable sample sizes and sampling intervals

Recent studies have shown that the (X) over bar chart with variable sampling intervals (VSI) and/or with variable sample sizes (VSS) detects process shifts faster than the traditional (X) over bar chart. This article extends these studies for processes that are monitored by both the (X) over bar and R charts. A Markov chain model is used to determine the properties of the joint (X) over bar and R charts with variable sample sizes and sampling intervals (VSSI). The VSSI scheme improves the joint (X) over bar and R control chart performance in terms of the speed with which shifts in the process mean and/or variance are detected.