DESIGN AND TEST OF A 7-T SPLIT-PAIR MAGNET FOR MAGNETIC SEPARATION

A 160 mm bore, 7 T split-pair magnet was constructed and tested aiming to mineral processing through HGMS (high gradient magnetic separation) or HCMS (helical channel magnetic separation.) This work describes the design and test results of the pair of coils operating under current in parallel mode. In the case of antiparallel current mode large repulsive force between coils is generated and a strong magnetic field gradient outside the magnet is created. A continuous magnetic separation system made with a helical channel magnetic separator for application in TiO2 processing is analysed.

Estudo de genes envolvidos no processo de adesão do Acidithiobacillus ferrooxidans em calcopirita (CuFe'S.IND.2')

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bacterial and chemical leaching of chalcopyrite concentrates as affected by the redox potential and ferric/ferrous iron ratio at 22 degrees C

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determination of heavy metals and genotoxicity of water from an artesian well in the city of Vazante- MG, Brazil

The city of Vazante-MG is of great socioeconomic and environmental interest because it is the most important zinc producer district of Brazil. The mineral processing and geochemical processes may determine high concentrations of heavy metals in water intended for human consumption. Thus, the present study aimed to quantify and evaluate the heavy metal genotoxicity of artesian water in the city by Atomic absorption spectrophotometer analysis and testing with the Allium cepa test, respectively. This study reveals a chemical contamination in well water in the city, caused by the presence of heavy metals. Therefore, it can be considered that the high levels of heavy metals found in water samples are correlated with the genotoxic events observed in root cells of A. cepa.

Tipo de cimentação em materiais duros do perfil de alteração da mina de fosfato da Anglo American, Catalão-GO

One of the main challenges in the mining sector at present, related to the optimization of mineral assets, consists in to find the best proportion of each geological material to be mined and homogenized to ensure high productivity and stability in ore processing plants. The stability of a mineral processing plant is factor for achieving operational excellence, as a stable performance of the plants ensures economy and adherence to financial planning businesses. Is already well Know that the feed rate of the processing plants is dependent on the hardness and quality of the ore. Therefore, the ore behavior predictability is the solution to ensure the stability of mineral processing plants. This work was developed in Anglo American Phosphate Brazil Ltda., at the Fazenda Chapadão Phosphate Mine, located in the southeastern portion of the state of Goiás, in the municipalities of Catalão and Ouvidor. The phosphate ore is the result of supergene apatite concentration in the weathering profile of the alkaline ultramafic phlogopitized rocks, intruded by foscoritic and carbonatitic rocks series. The weathering profile has about 100 meters thick and is divided into three basic types, from top to bottom, coinciding with decreasing intensity of weathering: oxidized ore, micaceous ore and weathered rock. In each portion of this weathering profile, mainly near the contacts between these three divisions, are hard materials, cemented by minerals such as apatite, quartz, goethite, monazite and barite. The different features presented by these materials makes to be vital the correct identification, quantification and location of different hard materials in the mine area, to maximize its use. The main objective of this study was to define the type of cementation of hard materials which predominates in each portion of the weathering profile in the mine, as well as their relationship with the protolith. The work involved geological mapping, channel sampling...

Scanning electron microscopy evaluation of the hard tissue barrier after pulp capping with calcium hydroxide, mineral trioxide aggregate (MTA) or ProRoot MTA

The aim of this study was to investigate the morphology and localisation of calcium hydroxide- and mineral trioxide aggregate (MTA)-induced hard tissue barriers after pulpotomy in dogs' teeth. Pulpotomies were performed on maxillary and mandibular premolars of five dogs. The teeth were assigned into three groups according to the pulp-capping agent used. The pulpal wounds were capped with calcium hydroxide (Ca(OH)(2) - control), MTA or ProRoot MTA, and the cavities were restored with amalgam. After a 90-day follow-up period, the dogs were euthanised and the teeth were examined under scanning electron microscopy (SEM). An image-processing and analysis software was used to delimit the perimeters of the root canal area and the hard tissue barrier to determine the percentage of root canal obliteration. SEM data were used to assess the morphology, localisation and extension of the reparative hard tissue barriers. ProRoot MTA was statistically different from MTA and Ca(OH)(2) (P < 0.05) regarding tissue barrier morphology. Localisation data showed that ProRoot MTA was significantly different from Ca(OH)(2) (P < 0.05) and similar to MTA (P > 0.01; P > 0.05). No statistically significant difference (P > 0.01; P > 0.05) was observed between MTA and Ca(OH)(2). A larger number of complete (centroperipheral) hard tissue barriers with predominance of dentinal tubules was observed to the ProRoot MTA when compared with the Ca(OH)(2) group.

Alveolar process preservation at implants installed immediately into extraction sockets using deproteinized bovine bone mineral - an experimental study in dogs

Aim To evaluate the soft tissue and the dimensional changes of the alveolar bony crest at sites where deproteinized bovine bone mineral (DBBM) particles, concomitantly with the placement of a collagen membrane, were used at implants installed into sockets immediately after tooth extraction. Material and methods The pulp tissue of the mesial roots of 3P3 was removed in six Labrador dogs, and the root canals were filled. Flaps were elevated bilaterally, the premolars hemi-sectioned, and the distal roots removed. Recipient sites were prepared in the distal alveolus, and implants were placed. At the test sites, DBBM particles were placed in the residual marginal defects concomitantly with the placement of a collagen membrane. No treatment augmentation was performed at the control sites. A non-submerged healing was allowed. Impressions were obtained at baseline and at the time of sacrifice performed 4 months after surgery. The cast models obtained were analyzed using an optical system to evaluate dimensional variations. Block sections of the implant sites were obtained for histological processing and soft tissue assessments. Results After 4 months of healing, no differences in soft tissue dimensions were found between the test and control sites based on the histological assessments. The location of the soft tissue at the buccal aspect was, however, more coronal at the test compared with the control sites (1.8 +/- 0.8 and 0.9 +/- 0.8 mm, respectively). At the three-dimensional evaluation, the margin of the soft tissues at the buccal aspect appeared to be located more apically and lingually. The vertical dislocation was 1 +/- 0.6 and 2.7 +/- 0.5 mm at the test and control sites, respectively. The area of the buccal shrinkage of the alveolar crest was significantly smaller at the test sites (5.9 +/- 2.4 mm2) compared with the control sites (11.5 +/- 1.7 mm2). Conclusion The use of DBBM particles concomitantly with the application of a collagen membrane used at implants placed into sockets immediately after tooth extraction contributed to the preservation of the alveolar process.

Bone mineral density on conventional and digitized images under different parameters of digitization and storage

Aim: To assess the bone mineral density on conventional and digitized images, comparing whether different parameters of digitization and storage change these values. Methods: Twenty radiographs were taken from five partially dentulous dry mandibles with an aluminum 7-mm stepwedge placed on the superior edge of the film. After processing, the films were digitized with a resolution of 600 and 2,400 d.p.i. and saved as TIFF and JPEG files. On every conventional and digitized image, circular regions of interest were selected for densitometry and radiographic contrast analysis. Results: Pearson's correlation coefficient showed a significant and strong mean gray values association between digitized and conventional images, differing from radiographic contrast that did not show a significant association. ANOVA did not reveal a statistically significant difference in bone density and radiographic contrast among the four digitized image groups, but the conventional image contrast was significantly lower. Conclusions: Bone mineral density did not differ in both conventional and digitized images. The parameters of image compression and resolution, tested in this study, did not change the results of densitometry and digitization process increased the radiographic contrast.

Aplicación de un subproducto del procesamiento de guayaba en un Ultisol, en presencia y en ausencia de fertilización mineral

There is a relative lack of technical studies on the adequate management of organic wastes from food processing. The aim of this study was to evaluate the effect of applying doses of a byproduct from guava processing, in the presence and absence of mineral fertilization, on the fertility of a an Ultisol (or Red-Yellow Argisol) under laboratory conditions. An entirely randomized 5x2 factorial experimental design was used with five byproduct doses, in the presence and absence of mineral fertilization, with four repetitions, for a total of 40 experimental units. Under the experimental conditions, the attributes pH, OM, K, Mg, BS, T, V, B, Fe, Zn and S-SO42- were affected by the guava byproduct doses, as well as by the presence or absence of mineral fertilization. With the use of this fertilization, the variables OM, K, H+Al, T, Fe and Zn increased more as a function of byproduct dose than in the absence of fertilization. The results obtained demonstrate the potential of using this waste material in the cycling and supply of nutrients.

Coffee processing residues as a soil potassium amendment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)