Concurrence between the maxillary midline and bisector to the interpupillary line

Purpose: Symmetry is one of the factors that contributes to facial harmony, and in oral rehabilitation it determines the success of esthetic treatment. Therefore, the aim of the present study was to analyze the axial symmetry between the bipupillar midline and maxillary central incisors midline of 102 dental students (both genders) distributed across five Brazilian dental schools. Materials and Methods: Students with no teeth missing and who had never been subjected to any dental treatment were selected. Photographs were taken with a Dental Eye III camera with a 100-mm macro objective and ratio of 1 : 10 from natural size, recorded on an Ektachrome ASA/ISO 100 film. The images were developed and applied to Microsoft Office Power Point 2007 software. The results were analyzed by analysis of variance and Student's t-test (= 0.05). Results: There was no significant correlation between bipupillar midline and the maxillary dental midline, irrespective of gender. Conclusion: No significant coincidence was observed between the interpupillary and dental midline. However, the interpupillar distance and its relationship with other anatomic structures may be used as a reference in treatment, but measurements must be assessed individually. CLINICAL SIGNIFICANCE Anatomic measurements and facial proportions can be helpful during the planning of esthetic oral rehabilitation. © 2009 Wiley Periodicals, Inc.

Analysis of association between posterior crossbite, median line deviation and facial asymmetry

Facial asymmetry is a common human characteristic and can occur on many levels, originate of genetic factors, and can be caused by traumas or due to cross bite and/or muscular disability. The aim of this study was to evaluate the relation between posterior crossbite, median line deviation and facial asymmetry. For this study 70 children aged between 3 and 10 years-old were examined and photographed. Using Microsoft Office Power Point 2007, horizontal lines and one vertical line on median line were drawn, to subjectively analyze facial discrepancies. In relation to overjet, the majority of children (78.6%) showed normal relation, followed by high overjet (17.1%), anterior crossbite (4.3%). In relation to overbite, the majority of children (60%) showed normal relation, 27.1% anterior opened bite (negative overbite), and 12.9% showed high overbite. Posterior crossbite was present in 27.1% of children. Among them, 68.4% showed unilateral crossbite on right side, 21.1% bilateral crossbite and 10.5% unilateral crossbite on left side. The relation between posterior crossbite and facial asymmetry, according to Fisher´s Exact Test (p=0.0970), there was no statistically significant association. In relation to median line, the association was statistically significant with posterior crossbite (p=0.0109) and with facial asymmetry (p=0.0310). There was association between posterior crossbite and median line deviation. There was no association between posterior crossbite and facial asymmetry.

Estimativa de parâmetros estruturais de áreas de produção de eucalipto através de imagens de satélite na região de Botucatu /SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Projeto mecânico de um redutor de engrenagens sem-fim numa esteira transportadora inclinada

This work aims to present the design and development of a speed reducer worm gear that will be implemented on an inclined treadmill that aims to raise the load below the top floor. The project start was made with research on issues related to mechanisms and machine elements, and these theories of fundamental importance in the development of device components, along with the help of SolidWorks software that was used to model the main parts of the project and Microsoft Office Excel 2007 was used to alight formulas to perform calculations of the project. All data for calculations were taken from the conditions of the problem to be solved in the best possible way the proposed problem (lifting load from the belt). Following the entire sequence of design gearbox assembly, beginning in pre-sizing and endless selection of electric motor, which consists of an iterative project, then scaling the worm gear and crown, shafts, splines, calculation and bearing selection

Algoritmo genético aplicado ao sequenciamento de picking e faturamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adesão dos profissionais de saúde às precauções de contato em unidade de terapia intensiva

Pós-graduação em Enfermagem (mestrado profissional) - FMB

Anatomia comparada da madeira de Cordia trichotoma (Vell.) arráb. ex steud. (Boraginaceae) proveniente de sementes de duas procedências e análise dos anéis de crescimento

Pós-graduação em Ciência Florestal - FCA

Avaliação econômica de Eucalipto irrigado em diferentes cenários

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Aplicações da teoria de nós no estudo da estrutura de proteínas

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Caracterização da fauna recebida e avaliação dos procedimentos em Centros de Triagem de Animais Silvestres (CETAS)

Estima-se que anualmente, em função do tráfico de animais silvestres, cerca de 12 milhões de espécimes sejam retirados de nossas florestas, sendo que apenas uma ínfima porcentagem de indivíduos é recuperada e destinada à soltura com o devido rigor técnico. O tráfico de animais silvestres constitui um dos fatores mais relevantes da destruição da fauna, acarretando em um desequilíbrio na estruturação e manutenção dos ecossistemas. Este comércio ilegal constituise o terceiro maior do mundo, perdendo apenas para o tráfico de narcóticos e armas. Assim, para otimizar o processo de soltura da fauna como estratégia para conservação de espécies torna-se necessário uma análise quantitativa e qualitativa da fauna atendida e dos procedimentos realizados nos Centros de Triagem de Animais Silvestres (CETAS). Nesse sentido, o presente trabalho teve como objetivo fazer uma caracterização da fauna recebida e uma avaliação dos procedimentos realizados em dois CETAS, além de discutir sobre a importância desse órgão na triagem, reabilitação e conservação de animais silvestres. O presente estudo é justificado pela escassez de informações sobre a fauna retirada da natureza. Estas são necessárias para servir de base científica para a adoção de políticas públicas para o combate ao tráfico de animais silvestres; elaborar um programa de fauna que contemple a triagem e destinação adequada e contribuir para o desenvolvimento de trabalhos educativos com o fim de esclarecimento da sociedade. Foram analisados o “Livro de Registro” do CETAS da Fundação Animália e o “Livro de Plantão” do CETAS DEPAVE – 3, bem como os “Relatórios CETAS” que esses dois Centros enviaram ao IBAMA. O período escolhido foi do ano de 2003 a 2008. Os dados foram compilados e organizados em planilhas do Microsoft Office Excel e foram elaborados tabelas e gráficos para análise dos resultados.

Sistema de cálculo para determinação do tempo de exposição em radioterapia veterinária

Radiotherapy in veterinary practice is already known and widely distributed in large specialized centers of developed countries. In early 2000, there were about 30 radiotherapy equipment specifically designed for the veterinary clinic in the United States. In Brazil, the veterinary radiotherapy is still confined to research in universities, where most of the procedures is radiation therapy performed with superficial x-ray machines, with a voltage between 50 and 150 kVp, focus-distance surface (DFS) between 20,0cm and 40,0cm. As that occurs in human medicine, new research strengthens the development and prospects for the use of radiotherapy as a safe option for treating cancer in animals. This paper presents a methodology for calculating the exposure time for superficial radiotherapy procedures in veterinary medicine for small animals (dogs and cats). The dosimetric parameters of X-rays are determined using a spreadsheet tool for Microsoft Office Excel, developed in this paper for a device Dermopan 2, Veterinary Hospital of UNESP in Araçatuba. Using the worksheet helps the veterinarian to determine the time of exposure to radiation determined for each clinical case, optimize the workflow for professionals in veterinary radiotherapy procedures, which often lack the medical physics in team and at the time of radiotherapy. The correct use of spreadsheet decreases the chances of errors in dose rates of radiation, providing a higher quality of care

Estudo da deposição de energia das radiofrequências através do método das diferenças finitas dependentes do tempo Monografia

Radiotherapy in veterinary practice is already known and widely distributed in large specialized centers of developed countries. In early 2000, there were about 30 radiotherapy equipment specifically designed for the veterinary clinic in the United States. In Brazil, the veterinary radiotherapy is still confined to research in universities, where most of the procedures is radiation therapy performed with superficial x-ray machines, with a voltage between 50 and 150 kVp, focus-distance surface (DFS) between 20,0cm and 40,0cm. As that occurs in human medicine, new research strengthens the development and prospects for the use of radiotherapy as a safe option for treating cancer in animals. This paper presents a methodology for calculating the exposure time for superficial radiotherapy procedures in veterinary medicine for small animals (dogs and cats). The dosimetric parameters of X-rays are determined using a spreadsheet tool for Microsoft Office Excel, developed in this paper for a device Dermopan 2, Veterinary Hospital of UNESP in Araçatuba. Using the worksheet helps the veterinarian to determine the time of exposure to radiation determined for each clinical case, optimize the workflow for professionals in veterinary radiotherapy procedures, which often lack the medical physics in team and at the time of radiotherapy. The correct use of spreadsheet decreases the chances of errors in dose rates of radiation, providing a higher quality of care

Metodologia para otimização em subcontratação de serviço de usinagem

Operational Research (OR) is an eminent science to business competitiveness and the capacity of algorithms and spreadsheets that exist today allows people to apply them for a lower cost and with less complexity. However, spreadsheets linked to OR techniques, when directed to real problems, are still little explored in their full potential. In order to use them better, this article utilizes the Microsoft Office Excel to solve an optimization practical problem and decision-making of machining subcontracting. In general, although considered a frequent problem, is not of easy solution, optimize the mix of production versus outsourcing, because of the restrictions and resources available, it requests investments in specific software. In this way, this research aims to develop software to be called SOSU (Optimization Software for Machining Subcontracting). SOSU should introduce the best mix of internal and subcontracted machining for n types of parts that, over a certain period of time t, maximize capacity and meet all the demand at the lowest cost possible. The methodology adopted follows the bibliographic reference and it is assumed that the necessary data to prove from mathematical modeling of production areas and from a system of costs already structured. The nature of the problem justifies the application of Linear Programming (LP), Visual Basic for Applications (VBA) is used for computational implementation and interface with the user and the supplement Solver to find the solution. The analysis of the experiments show that the SOSU optimizes resources and improves the decision-making process, besides an easy operation, it can be implemented or quickly adapted and without the need of large investments.

Desenvolvimento de software para avaliação dos desempenhos hidráulico e econômico de pivôs centrais

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Penetration of 38% hydrogen peroxide into the pulp chamber in bovine and human teeth submitted to office bleach technique

This study evaluated the pulp chamber penetration of peroxide bleaching agent in human and bovine teeth after office bleach technique. All the teeth were sectioned 3 mm apical of the cement-enamel junction and were divided into 2 groups, A (70 third human molars) and B (70 bovine lateral incisors), that were subdivided into A1 and B1 restored by using composite resin, A2 and B2 by using glass ionomer cement, and A3 and B3 by using resin-modified glass ionomer cement; A4, A5, B4, and B5 were not restored. Acetate buffer was placed in the pulp chamber, and the bleaching agent was applied for 40 minutes as follows: A1-A4 and B1-B4, 38% hydrogen peroxide exposure and A5 and B5, immersion into distilled water. The buffer solution was transferred to a glass tube in which leuco crystal violet and horseradish peroxidase were added, producing a blue solution. The optical density of the blue solution was determined by spectrophotometer and converted into microgram equivalents of hydrogen peroxide. Data were submitted to analysis of variance and Dunnett, Kruskal-Wallis, and Tukey tests (5%). A higher level of hydrogen peroxide penetrated into the pulp chamber in resin-modified glass ionomer cements in bovine (0.79 +/- 0.61 mu g) and human (2.27 +/- 0.41 mu g) groups. The bleaching agent penetration into the pulp chamber was higher in human teeth for any experimental situation. The penetration of the hydrogen peroxide depends on restorative materials, and under the conditions of this study human teeth are more susceptible to penetration of bleaching agent into the pulp chamber than bovine teeth.