Stress Analysis in Simulation Models With or Without Implant Threads Representation

Purpose: This study aimed to evaluate the influence of implants with or without threads representation on the outcome of a two-dimensional finite element (FE) analysis. Materials and Methods: Two-dimensional FE models that reproduced a frontal section of edentulous mandibular posterior bone were constructed using a standard crown/implant/screw system representation. To evaluate the effect of implant threads, two models were created: a model in which the implant threads were accurately simulated (precise model) and a model in which implants with a smooth surface (press-fit implant) were used (simplified model). An evaluation was performed on ANSYS software, in which a load of 133 N was applied at a 30-degree angulation and 2 mm off-axis from the long axis of the implant on the models, The Von Mises stresses were measured. Results: The precise model (1.45 MPa) showed higher maximum stress values than the simplified model (1.2 MPa). Whereas in the cortical bone, the stress values differed by about 36% (292.95 MPa for the precise model and 401.14 MPa for the simplified model), in trabecular bone (19.35 MPa and 20.35 MPa, respectively), the stress distribution and stress values were similar. Stress concentrations occurred around the implant neck and the implant apex. Conclusions: Considering implant and cortical bone analysis, remarkable differences in stress values were found between the models. Although the models showed different absolute stress values, the stress distribution was similar. INT J ORAL MAXILLOFAC IMPLANTS 2009;24:1040-1044

A practical guide for operational validation of discrete simulation models

As the number of simulation experiments increases, the necessity for validation and verification of these models demands special attention on the part of the simulation practitioners. By analyzing the current scientific literature, it is observed that the operational validation description presented in many papers does not agree on the importance designated to this process and about its applied techniques, subjective or objective. With the expectation of orienting professionals, researchers and students in simulation, this article aims to elaborate a practical guide through the compilation of statistical techniques in the operational validation of discrete simulation models. Finally, the guide's applicability was evaluated by using two study objects, which represent two manufacturing cells, one from the automobile industry and the other from a Brazilian tech company. For each application, the guide identified distinct steps, due to the different aspects that characterize the analyzed distributions. © 2011 Brazilian Operations Research Society.

A kinetic model of phosphorus metabolism in growing goats

The effect of increasing phosphorus (P) intake on P utilization was investigated in balance experiments using 12 Saanen goats, 4 to 5 mo of age and weighing 20 to 30 kg. The goats were given similar diets with various concentrations of P, and 32P was injected to trace the movement of P in the body. A P metabolism model with four pools was developed to compute P exchanges in the system. The results showed that P absorption, bone resorption, and excretion of urinary P and endogenous and fecal P all play a part in the homeostatic control of P. Endogenous fecal output was positively correlated to P intake (P < .01). Bone resorption of P was not influenced by intake of P, and P recycling from tissues to the blood pool was lesser for low P intake. Endogenous P loss occurred even in animals fed an inadequate P diet, resulting in a negative P balance. The extrapolated minimum endogenous loss in feces was .067 g of P/d. The minimum P intake for maintenance in Saanen goats was calculated to be .61 g of P/ d or .055 g of P/(kg.75·d) at 25 kg BW. Model outputs indicate greater P flow from the blood pool to the gut and vice versa as P intake increased. Intake of P did not significantly affect P flow from bone and soft tissue to blood. The kinetic model and regressions could be used to estimate P requirement and the fate of P in goats and could also be extrapolated to both sheep and cattle.

Desenvolvimento de uma metodologia para elaboração de modelos de predição dos níveis de ruído do campo acústico de usinas hidrelétricas

Pós-graduação em Engenharia Mecânica - FEIS

A vulnerabilidade da ictiofauna à invasão por espécies de peixes: um modelo baseado no indivíduo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade e estimativa de acúmulo da biomassa em soqueira de cana-de-açúcar irrigada por gotejamento subsuperficial com diferentes doses de n-fertilizante

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de parâmetros construtivos e operacionais na vida em fadiga de uniões aparafusadas em tração

Pós-graduação em Engenharia Mecânica - FEG

Modelo dinâmico da coluna lombar humana, com solicitação de esforço postero-anterior: análise com rigidez viscoelástica não linear

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metodologia para utilização de algoritmos genéticos em modelos de simulação computacional em ambientes de manufatura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem dinâmica temporal para a avaliação da disponibilidade hídrica e seus efeitos na sustentabilidade do sistema da sub-bacia do córrego do Boi Branco - SP

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Análise comparativa de softwares de simulação de onda de cheia e corridas de massa

This scientific research aimed at presenting a comparative analysis of softwares used to represent the processes of flood wave and debris flow. For this, a literature review was performed on these processes and on simulation models used to represent them. Then, a research on scientific database and developers’ websites was performed to identify the softwares used to simulate these processes. This step was performed based on specific criteria such as the type of simulation performed by the software, its practical applications and a user friendly interface. A free distribution and totally functional software was chosen and its simulation mechanisms were tested through a simulation exercise and the results interpreted based on data on measured in the Basin of Ribeirão Marins section Monjolinho located in Piracicaba - SP. With respect to the processes, it was sought to present the dynamics, constraints, parameters and variables used to understand them and for the simulation models were presented the conceptual aspects of mathematical modeling including the steps of the simulation process and the different types of simulation models used to represent them. In total, 20 softwares were identified, and the software object of analysis was the ABC 6 that performs simulation of flood wave. Through the simulation exercise, it was observed that were presented overestimated values of flow compared to measured data in the basin. For both hypotheses were raised about the causes of the discrepancy between the observed and simulated flow. It has been concluded that the simulation process consisted of a complex procedure where generalizations, misrepresentations and simplifications may occur due to the data used and the method adopted, but it is a useful tool in planning and decision making in various types of studies and environmental projects

Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Modelo de avaliação de impacto ambiental utilizando a teoria dos conjuntos fuzzy: um estudo de caso para a indústria automobilística

Pós-graduação em Ciências Ambientais - Sorocaba

Calibração e teste do modelo CROPGRO para a cultura do feijão

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Stochastic simulation of time-series models combined with geostatistics to predict water-table scenarios in a Guarani Aquifer System outcrop area, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)