98 resultados para Metodo de aplicacao
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
This piece of work focuses the application of a computational method to obtain clinographic maps, by using C.K. Wentworth's method. The developed program to construct the clinographic maps is completely structured in Basic Language and it uses Line PC Micro-Computers. As an exercise for practical application, in this study we defined a certain region, where the topographic base map is that of Brazil, 1:250 000 scale, Marilia contour map, having as the study area the region near the city of Assis (SP). -English summary
Resumo:
Human oxyhaemoglobin A and A2 from normal individuals and oxyhaemoglobin S from patients with sickle cell anaemia and sickle cell trait were studied using Isopropanol/buffer method at 37°C and 40°C. Hb S was less stable than Hb A, whereas Hb A2 was considerably more stable than either. Denaturation of Hb S was dependent on temperature and its concentration. Between the patients with sickle cell trait it was not possible to verify the influence of the concentration probably due to the small range used (from 38% to 44%).
Resumo:
The purpose of this paper is to illustrate the application of accumulated means in two of Horton's laws of drainage composition: law of stream length and law of stream slope. Data used in the analysis were obtained from 30 drainage basins developed in the Paulistano Plateau and in the Serra do Mar escarpment, in the State of Sao Paulo. It was found that the application of accumulated means provides results according to Horton.-from English summary
Resumo:
Examines the historiography of the geographical ideas in Brazil starting from the analysis of Monbeig's work which has two essential elements: the positivist-functionalist discourse, and the ideals of the politic liberalism that are his main preoccupation. The preoccupation of geography as a science is constant in all his discourse. -English summary
Resumo:
Deals with some common problems in structural analysis when calculating the experimental semi-variogram and fitting a semi-variogram model. Geochemical data were used and the following cases were studied: regular versus irregular sampling grade, presence of 'outliers' values, skew distributions due to a high variability of the data and estimation using a kriging procedure. -from English summary
Resumo:
The densitometrical interpretation is a technical resource that removes both the subjectivity of conventional interpretation and the high operational cost of automatic interpretation. Meanwhile, the densitometric lecture presents variability and this work has the objective of examinating, through Chi-square test, if there exists significative differences of cone overture of the densitometer as to the filter used. The results were the following: the variation that happened in this densitometric lecture, when different cone overture and filter were used, have not invalidated the values that were obtained; the extreme values variations have to be used with attention, so will not be overstep of values among the different elements of soil covering have to be used discerniment to classify this values; the study was in consonance with other authors. -from English summary
Resumo:
The results indicated potassium as the most important for the discrimination between groups of samples, followed by magnesium, calcium and sodium. As the area has been under intense sugar cane industrialisation, the soil and the river waters of the region receive a high content of vinasse rich in potassium. -from English summary
Resumo:
This work presents the design and procedure of a DC-to-AC converter using a ZVS Commutation Cell developed by Barbi and Martins (1991) and applied to the family of DC-to-DC PWM converters. Firstly, we show the cell applied to buck converter. The stages of operation and the main current and voltage equations of the resonant devices are presented. Next, we adapt the converter to the regenerative operation mode. Hence, the full bridge converter at low frequency operation is conected on the DC-to-DC stage (at high frequency) output ends (Seixas, 1993). Commutation of zero voltage for all switches, PWM at constant frequency and neither overvoltage nor additional current stress are observed by digital simulation. The design example and experimental results obtained by prototype rated at 275 V, 1 kW and 40 kHz are also presented.
Resumo:
This paper discusses, within the prevaling Brazilian situation, the possibility of applying 'Causal Tree' (CT) method in investigating occupational accidents by safety personnel in the public health services and workers' unions. The method was developed during the seventies in France, for use by plant safety personnel. The authors used this method in Botucatu, State of Sao Paulo, Brazil, in order to investigate 40 serious occupational accidents that occurred in industrial plants during the second half of 1993, that had been registered by Social Security. In these cases, the predominance of situations in which the lack of safety measures were identified by inspection indicates that in most instances, the use of CT is unnecessary. However, the authors discuss its use by safety personnel from the public health services and workers' unions to investigate certain accidents to contribute to the knowledge base and help overcome the cultural based guilt which, in Brazil, has turned the victim into the person responsible for the accident.
Resumo:
Este trabajo tiene como objetivo principal oferecer una herramienta alternativa para la resolución de placas finas, presentes en edifícios, relacionadas con los métodos de cálculo adquiridos durante la universidad, calculo a través de tablas con pocas condiciones de controno. El método utilizado es el Método de los elementos de contorno que discretiza la placa en partes finitas, aproximando los resultados obtenidos a valores reales. En este trabajo se ha utilizado el programa de ordenador Placas2.for (TAGUTI,Y. 2010) basado en el Método de los elementos de contorno para la resolución de las placas finas con varias condiciones de contorno geométricas y de cargas
Resumo:
The study presents the application of an ergonomic method based on graphical mesh, created to analyze the attributes of public open space and that influence on their usability. It was based on DePAN method, created to classify the service level offered by niches present in open relationship spaces. However, this method adopted Geographical Information System (GIS ) to make maps that represent the space attributes. This study proposed an adaptation of this method, which replaces GIS by AutoCAD software to generate maps . The goal is to test the feasibility and efficiency of producing maps in AutoCAD software to represent the service niches level. An relashionship area on a college campus for data collecting in graphical meshes and maps confection. By applying the graphical mesh the attributes of that space were evaluated to help promote people permanence on site. Although the process through AutoCAD seems to be harder by being mechanical it guarantees a satisfactory result for analysis, resembling images generated by GIS. Therefore, it is concluded that it’s possible to represent graphically the riches service level.
Resumo:
The vegetal residues maintenance on soil surface, characteristic of no-tillage system have changing the nutrients availability. So, in this sense, the aim of this work was to evaluate the effect of times of N application on corn sowed in no tillage system under vegetable residues of different species used for soil covering and straw supply in the cerrado area. The experiment was carried out in field conditions, in an Oxisol characteristic of this area. The treatments were constituted by the combination of different times of N application: (43+23+20+00); (00+70+20+00); (00+00+90+00); (00+00+20+70); (00+00+00+90) with an control treatment (absence of nitrogen), in kg ha(-1), respectively 30 days before the desiccation, at desiccation, at sowing and at sidedress of corn, sowed directly on Penisetum americanum and Brachiaria decumbens residues. By the results it can be concluded that nitrogen application in soybean, independent of time, does not increase productivity in relation to the treatment without nitrogen application.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)