Evaluation of muscle tissue growth in Young Mediterranean Buffaloes slaughtered at different weights

This study evaluated muscle, adipose and bone tissue growth in young Mediterranean buffaloes slaughtered with different weights. Twenty eight non-castrated males, approximately 14 months old and 330 kilos, were distributed in four experimental and one control groups. Received the same diet during a non-fixed period and when reached the pre-established weights (450 kg, 480 kg, 510 kg, 540 kg) were fasted for 16 hours and slaughtered. NRC 1996, level 2, ruminal simulation program for non-castrated animals with a daily weight gain of 1.40 kg determined percentage composition of experimental diet (dry matter): coast cross hay (20.6%), corn silage (7.8%), cotton seed (8.2%), humid corn silage (46%) and commercial mineral concentrate (17.4%), representing 13% of crude protein and 2,68% of metabolizable energy (Mcal/kg). Feed was offered ad libitum twice daily. Slaughter of control group occurred after 30 days of an adaptation period. The other ones were weighted each 28 days until reached pre-established weight. Carcasses were chilled for 18 hours under -5 degrees C. Ninth, 10 degrees and 11 degrees ribs of the half left carcass were submitted to HH section and according to the statistical regression analysis (SAS, 1996), allometric coefficient value was negative (b<1) demonstrating the early growth of muscle in relation to empty carcass weight.

Muscle fiber type characterization and myosin heavy chain (MyHC) isoform expression in Mediterranean buffaloes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predicting beef carcass retail products of Mediterranean buffaloes by real-time ultrasound measures

Twenty eight Mediterranean buffaloes bulls were scanned with real-time ultrasound (RTU), slaughtered, and fabricated into retail cuts to determine the potential for ultrasound measures to predict carcass retail yield. Ultrasound measures of fat thickness, ribeye area and rump fat thickness were recorded three to five days prior to slaughter. Carcass measurements were taken, and one side of each carcass was fabricated into retail cuts. Stepwise regression analysis was used to compare possible models for prediction of either kilograms or percent retail product from carcass mesaurements and ultrasound measures. Results indicate that possible prediction models for percent or kilograms of retail products using RTU measures were similar in their predictive power and accuracy when compared to models derived from carcass measurements. Both fat thickness and ribeye area were over-predicted when measured ultrasonically compared to measurements taken on the carcass in the cooler. The mean absolute differences for both traits are larger than the mean differences, indicating that some images were interpreted to be larger and some smaller than actual carcass measurements. Ultrasound measurements of REA and FT had positive correlations with carcass measures of the same traits (r=.96 for REA and r=.99 for FT). Standard errors of prediction currently are being used as the standard to certify ultrasound technicians for accuracy. Regression equations using live weight (LW), rib eye area (REAU) and subcutaneous fat thickness (FTU) between 12(th) and 13 (th) ribs and also over the biceps femoris muscle (FTP8) by ultrasound explained 95% of the variation in the hot carcass weight when measure immediately before slaughter.

Genetic Correlation for Pre-Weaning and Post-Weaning Traits of Mediterranean Buffaloes from Brazil, Estimated By Bayesian Inference

The aim of this study was to estimate genetic, environmental and phenotypic correlation between birth weight (BW) and weight at 205 days age (W205), BW and weight at 365 days age (W365) and W205-W365, using Bayesian inference. The Brazilian Program for Genetic Improvement of Buffaloes provided the data that included 3,883 observations from Mediterranean breed buffaloes. With the purpose to estimate variance and covariance, bivariate analyses were performed using Gibbs sampler that is included in the MTGSAM software. The model for BW, W205 and W365 included additive direct and maternal genetic random effects, maternal environmental random effect and contemporary group as fixed effect. The convergence diagnosis was achieved using Geweke, a method that uses an algorithm implemented in R software through the package Bayesian Output Analysis. The calculated direct genetic correlations were 0.34 (BW-W205), 0.25 (BW-W365) and 0.74 (W205-W365). The environmental correlations were 0.12, 0.11 and 0.72 between BW-W205, BW-W365 and W205-W365, respectively. The phenotypic correlations were low for BW-W205 (0.01) and BW-W365 (0.04), differently than the obtained for W205-W365 with a value of 0.67. The results indicate that BW trait have low genetic, environmental and phenotypic association with the two others traits. The genetic correlation between W205 and W365 was high and suggests that the selection for weight at around 205 days could be beneficial to accelerate the genetic gain.

Genetic Parameters for Growth Traits of Mediterranean Buffaloes from Brazil, Estimated By Bayesian Inference

Quantitative analysis of growth genetic parameters is not available for many breeds of buffaloes making selection and breeding decisions an empirical process that lacks robustness. The objective of this study was to estimate heritability for birth weight (BW), weight at 205 days (W205) and 365 days (W365) of age using Bayesian inference. The Brazilian Program for Genetic Improvement of Buffaloes provided the data. For the traits BW, W205 and W365 of Brazilian Mediterranean buffaloes 5169, 3792 and 3883 observations have been employed for the analysis, respectively. In order to obtain the estimates of variance, univariate analyses were conducted using the Gibbs sampler included in the MTGSAM software. The model for BW, W205 and W365 included additive direct and maternal genetic random effects, random maternal permanent environmental effect and contemporary group that was treated as a fixed effect. The convergence diagnosis was performed employing Geweke, a method that uses an algorithm from the Bayesian Output Analysis package that was implemented using R software environment. The average values for weight traits were 37.6 +/- 4.7 kg for BW, 192.7 +/- 40.3 kg for W205 and 298.6 +/- 67.4 kg for W365. The heritability posterior distributions for direct and maternal effects were symmetric and close to those expected in a normal distribution. Direct heritability estimates obtained using the modes were 0.30 (BW), 0.52 (W205) and 0.54 (W365). The maternal heritability coefficient estimates were 0.31, 0.19 and 0.21 for BW, W205 and W365, respectively. Our data suggests that all growth traits and mainly W205 and W365, have clear potential for yield improvement through direct genetic selection.

Genetic variability in Mediterranean buffalos evaluated by pedigree analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Inbreeding depression on production and reproduction traits of buffaloes from Brazil

The objective of this study was to evaluate the influence of inbreeding depression on traits of buffaloes from Brazil. Specifically, the traits studied were body weight at 205 and 365 days of age, average daily gain from birth to 205 days (ADG_205), average daily gain between 205 and 365 days (ADG205_365) in Mediterranean buffaloes, and milk yield, lactation length, age of first calving and calving intervals in Murrah buffaloes. Inbreeding effects on the traits were determined by fitting four regression models (linear, quadratic, exponential and Michaelis-Menten) about the errors generated by the animal model. The linear model was only significant (P<0.05) for growth traits (exception of ADG205_365). The exponential and Michaelis-Menten models were significant (P<0.01) for all the studied traits while the quadratic model was not significant (P>0.05) for any of the traits. Weight at 205 and 365 days of age decreased 0.25kg and 0.39kg per 1% of increase in inbreeding, respectively. The inbred animals (F=0.25) produced less milk than non-inbred individuals: 50.4kg of milk. Moreover, calving interval increased 0.164 days per 1% of increase in inbreeding. Interestingly, inbreeding had a positive effect on age at first calving and lactation length, decreasing age of first calving and increasing lactation length. © 2012 Japanese Society of Animal Science.

Using Slaughter Weight to Predict Weight and Yield of Primal Cuts of Carcass from Buffaloes

The knowledge of the meat production from different buffalo breeds and their crossings in different feeding systems becomes necessary for the supply of subsidies to whole productive meat chain. Some quantitative carcass traits of Mediterranean buffaloes bulls, finished in feedlot, with initial age of fourteen months and 330 kg live weight, slaughtered with 450, 480, 510 and 540 kg, were evaluated. The diet contained 13% crude protein, 2.68 Mcal digestible energy/kg DM and a roughage : concentrate ratio of 25:75. Regression equations for prediction weight and yield of primal cuts of carcass as a function of slaughter weight were obtained. Carcass dressing percent increased as the slaughter weight increased (49.2; 49.5; 49.7; and 49.9%). The Pistola Style cut weight although increasing linearly in weight (108.2; 117.6; 124.0 and 130.7 kg) as the slaughter weight increased, declined linearly when expressed in relation to cold carcass weight (49.5; 49.0; 48.6 and 48.2%). In this experimental conditions Mediterranean young bulls slaughtered between 450 to 540 kg of live weight showed increasing yields of cold carcass, forequarter and thin flank.

Características bioquímicas da carne de bubalinos Mediterrâneo terminados em confinamento e abatidos em diferentes pesos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização histológica e bioquímica dos músculos longissimus dorsi e semitendinosus de bubalinos mediterrâneo abatidos em diferentes pesos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tuberculosis prevalence and risk factors for water buffalo in Para, Brazil

The prevalence of and possible risk factors for tuberculosis were studied in water buffalo from Para, Brazil. In this study, 3,917 pregnant and nonpregnant female Murrah and Mediterranean buffaloes were studied; 2,089 originated from Marajo Island, and 1,108 were from the mainland. The comparative cervical tuberculin test was used as a diagnostic test for tuberculosis in these animals. The prevalence of positive buffaloes was 3.5 % (100/2,809) on Marajo Island and 7.2% (80/1,108) on the mainland. The municipalities with the highest tuberculosis prevalence rates in animals were Ipixuna do Para (10.1 %), Marapanim (9.8 %), Chaves (9.4 %), Paragominas (8.6 %), and Cachoeira do Arari (6.7 %). The tuberculosis prevalence was not significantly different between the Murrah (4.3 %) and Mediterranean (4.8 %) breeds or between pregnant (5%) and nonpregnant (4.3%) buffaloes. Tuberculosis was detected in water buffaloes from Para, Brazil; the mainland buffalo exhibited the highest tuberculosis prevalence. These results indicate that this disease is dangerous to public health and buffalo farming in Para.

Ultra-som para predição da composição e características de carcaça em bubalinos

Este trabalho teve como objetivo avaliar características de carcaça por ultra-som de 28 bubalinos jovens Mediterrâneo terminados em confinamento e abatidos aos 450, 480, 510 e 540 kg de peso vivo (PV). Foi utilizado um equipamento de ultra-som Piemedical Scanner 200 Vet, com transdutor linear de 178 mm e 3,5 MHz, a cada intervalo de aproximadamente 28 dias, para obter a área do longíssímus dorsí (ALOU), espessura de gordura subcutânea (EGSU) entre a 12ª e 13ª costelas e a espessura de gordura na picanha (EGP8U), sob o terço superior do músculo bíceps femorís. Após atingirem os pesos de abate pré-estabelecidos, os animais foram abatidos e obteve-se o peso de carcaça quente (PCQ) e o rendimento de carcaça (RC). Após 24 horas de resfriamento, as carcaças foram seccionadas entre a 12a e 13a costelas e obtidas a área do longíssímus dorsí (ALOC), a espessura de gordura (EGSC) e a espessura de gordura sob o bíceps femorís (EGP8C) na carcaça. As correlações entre as medidas por ultra-som e na carcaça foram de 0,96 entre ALOU e ALOC, de 0,99 entre EGSU e EGSC e de 0,91 entre EGP8U e EGP8C. Equações de regressão utilizando o peso vivo (PV), ALOU, EGSU e EGP8U explicaram 95% da variação do PCQ quando a medida foi realizada imediatamente antes do abate. As equações para estimar o RC utilizando as mesmas características explicaram cerca de 32% da variação quando a medida foi realizada imediatamente antes do abate. O peso da porção comestível do corte traseiro a partir de medidas efetuadas por ultra-som e na carcaça é predito com maior magnitude que a percentagem da porção comestível. Os resultados indicam que as equações para as medidas ultra-sônicas apresentaram boa acurácia e podem ser utilizadas para estimar diferenças entre grupos de animais, mas há a necessidade de mais estudos envolvendo maior número de animais e de outros grupos genéticos de bubalinos.