Literatura, leitor e mass media: um estudo sobre a recepção de A Metamorfose, de Franz Kafka

Pós-graduação em Letras - IBILCE

O ensino do desenho para crianças de 9 a 10 anos de idade: um estudo comparativo entre duas escolas públicas e duas escolas particulares da região central de São Paulo

Pós-graduação em Artes - IA

A identidade forjada pela mídia: expressões cotidianoas reveladas por jovens das classes populares em roteiros pelos metrôs de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Composite resin color stability: influence of light sources and immersion media

Objective: This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Material and Methods: Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke (R) and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37 +/- 1 degrees C, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). Results: High-power-density LED (Delta E=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus - Delta E=2.05; XL 3000 - Delta E=2.28). Coffee (Delta E=8.40; Delta L=-5.21) showed the highest influence on color stability of the studied composite resin. Conclusion: There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media

This study evaluated the effect of surface sealant on the translucency of composite resin immersed in different solutions. The study involved the following materials: Charisma, Fortify and coffee, Coca-Cola®, tea and artificial saliva as solutions. Sixty-four specimens (n = 8) were manufactured and immersed in artificial saliva at 37 ± 1 °C. Samples were immersed in the solutions for three times a day and re-immersed in artificial saliva until the translucency readings. The measurements were carried out at nine times: T1 - 24 hours after specimen preparation, T2 - 24 hours after immersion in the solutions, T3 - 48 hours and T4 to T9 - 7, 14, 21, 30, 60 and 90 days, respectively, after immersion. The translucency values were measured using a JOUAN device. The results were subjected to ANOVA and Tukey's test at 5%. The surface sealant was not able to protect the composite resin against staining, the coffee showed the strongest staining action, followed by tea and regarding immersion time, a significant alteration was noted in the translucency of composite resin after 21 days.

Influence of culture media in viability test of conidia of entomopathogenic fungi

O presente trabalho objetivou investigar se meios de cultura utilizados em teste de viabilidade afetam a germinação de conídios de cinco isolados de Lecanicillium lecanii, cinco de Beauveria bassiana e quatro de Paecilomyces fumosoroseus. Os testes foram realizados em lâminas de microscopia contendo um dos seguintes meios de cultura: Ágar-água (AA), Meio Mínimo (MM), Batata, dextrose e ágar (BDA), Batata, dextrose, ágar e 1% de extrato de levedura (BDAL), Sabouraud, dextrose, ágar e extrato de levedura (SDAL) e Meio Completo (MC). Delimitaram-se três áreas por lâmina e em cada uma aplicou-se 0,05mL de uma suspensão com concentração de 5,5 x 105 conídios ml-1. Para cada isolado foi realizado um bioensaio, com seis tratamentos e cinco repetições. Avaliou-se a germinação 15 horas após incubação, a 26±0,5ºC. Os meios de cultura influíram na capacidade de germinação das três espécies estudadas, ocorrendo variações inter e intraespecíficas. Verificou-se que os meios Completo e BDA proporcionaram as maiores porcentagens de germinação dos isolados de L. lecanii, sendo que e as menores foram obtidas nos meios SDAL e AA. Os meios ricos em nutrientes (BDA, BDAL e Completo) favoreceram a germinação dos isolados de B. bassiana, o que não ocorreu com os meios pobres (AA e MM). Nos meios Completo e BDA foram obtidas as maiores porcentagens de germinação dos isolados de P. fumosoroseus. As menores percentagens, por sua vez, foram obtidas no meio SDAL. Entretanto, alguns isolados apresentaram alta germinação em meios pobres em nutrientes (AA e MM).

Influence of light source and immersion media in surface roughness and hardness of a nanofilled composite resin

The study evaluated the influence of light curing units and immersion media on superficial roughness and microhardness of the nanofilled composite resin Supreme XT (3M/ESPE). Light curing units used were: XL 3000 (3M/ESPE), Jet Lite 4000 Plus (JMorita) and Ultralume Led 5 (Ultradent) and immersion media were artificial saliva, Coke®, tea and coffee, totaling 12 experimental groups. Specimens (10mm x 2mm) were immersed in each respective solution for 5 seconds, three times a day, during 60 days and so, were submitted to measure of superficial roughness (Ra) and Vickers hardness. Data were subjected to two-way ANOVA test (p<0.05). Results showed that only the light source factor showed statistically difference for hardness. It was observed that the hardness of the composite resin Filtek Supreme XT (3M/ESPE) was influenced by the light source (p<0.01) independently of the immersion media (p= 0.35) and the Jet Lite 4000 Plus (JMorita) was the light curing unit that presented lower values. In relation to surface roughness, it was noted no-significant statistical difference for light source (p=0.84), when specimens were immersed in different beverages (p=0.35).

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media

Aims: The study evaluated the influence of light curing units and immersionmedia on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M)through the EDX analysis and SEM evaluation. Light curing units with different power densitiesand mode of application used were XL 3000 (480 mW/cm2), Jet Lite 4000 Plus (1230mW/cm2), andUltralume Led 5 (790 mW/cm2) and immersion media were artificial saliva, Coke1, tea and coffee,totaling 12 experimental groups. Specimens (10 mm 3 2 mm) were immersed in each respectivesolution for 5 min, three times a day, during 60 days and stored in artificial saliva at 378C 6 18Cbetween immersion periods. Topography and chemical analysis was qualitative. Findings: Groupsimmersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calciumat the material surface. Regarding coffee, there was a reasonable chemical degradation with loss ofload particles and deposition of ions. For tea, superficial degradation occurred in specific areaswith deposition of calcium, carbon, potassium and phosphorus. For Coke1, excessive matrix degra-dation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion:Light curing units did not influence the superficial morphology of composite resin tested, but theimmersion beverages did. Coke1affected material’s surface more than did the other tested drinks.Microsc. Res. Tech. 73:176–181, 2010.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Comparison of microbial numbers in soils by using various culture media and temperatures

The influence of different media and incubation temperatures on the quantification of microbial populations in sorghum, eucalyptus and forest soils was evaluated. Microbial growth was compared by using complex (tryptone soybean agar, TSA, casein-starch, CS, and Martin) and saline (Thorton, M3, Czapeck) media and incubation temperatures of 25 and 30&DEG; C. Higher numbers of total bacterial. and fungal colony-forming units (CFU) were observed in sorghum soils, and of spore-forming and Gram-negative bacteria in forest soils than other soils. Actinomycetes counts were highest in forest soil when using CS medium at 30&DEG; C and in sorghum soil at 25&DEG; C in M3 medium. Microorganism counts were dependent on the media and incubation temperatures. The counts at temperatures of 30&DEG; C were significantly higher than at 25&DEG; C. Microbial quantification was best when using TSA medium for total. and spore-forming bacteria, Thorton for Gram-negative bacteria, M3 for actinomycetes, and Martin for fungi. © 2005 Elsevier GmbH. All rights reserved.

Breed and season influence on milk quality parameters and in mastitis occurrence

Os objetivos do presente estudo foram avaliar a performance das raças Jersey e Holandesa em diferentes condições de pluviosidade (estações seca e chuvosa) através do monitoramento de aspectos relacionados com a mastite subclínica (contagem de células somáticas, isolamento microbiológico, tipo de patógeno isolado), qualidade do leite (lactose, proteína, gordura e sólidos totais) e produção (media da produção de leite) de ambas as raças. O estudo foi conduzido em propriedade leiteira localizada no estado de São Paulo, Brasil. Oito visitas foram realizadas a propriedade, quatro em período de alta pluviosidade e outro em período de baixa pluviosidade. Amostras de leite foram colhidas de todos os animais para contagem eletrônica de células somáticas e determinação dos principais componentes do leite (proteína, gordura, sólidos totais, lactose). Gordura, proteína, sólidos totais e produção leiteira foram influenciadas tanto pela raça como pela estação, apresentando tendências similares para ambas raças em ambas estações. A contagem de células somáticas (CCS) apresentou resultados similares para ambas as raças. Vacas holandesas com infecção intramamária (IIM) apresentaram um maior aumento na CCS quando comparadas as vacas Jersey (P<0.001). Na estação seca, 53 animais tiveram IIM em pelo menos um mês do estudo. Destes, 32 eram da raça Holandesa e 21 da raça Jersey. Na estação chuvosa, 65 animais possuíram infecção intramamária, dos quais 43 eram da raça Holandesa e 22 da raça Jersey. A frequência de casos de IIM foi maior na estação chuvosa em comparação à estação seca. Vacas Jersey apresentaram uma menor chance de desenvolver sinais e sintomas de IIM em relação às vacas holandesas na estação chuvosa (razão de chances=0.52). O maior numero de casos de IIM na estação chuvosa pode ter contribuído para uma menor taxa de lactose no leite para ambas as raças, sendo que esta pode ser considerada como um indicador do status de IIM. Existiu uma prevalência de patógenos contagiosos durante todo o experimento. O modelo estatístico aplicado mostrou que patógenos ambientais foram mais frequentemente isolados da raça Jersey, independentemente do período do estudo. Aparentemente existem diferenças na resposta imune das raças Jersey e Holandesa.

Influence of potassium nutrition and the nitrate ammonium ratio on the putrescine and spermidine contents in banana vitroplants

Potassium (K) is required in high doses by the banana (Musa sp.) plant and interacts with other nutrient elements in which banana tissues are maintained under in vitro condition as a consequence modifications in the plant metabolism take place mainly in nitrogen (N) compounds, such as proteins, amino acids, and secondary compounds. When K is present in concentrations lower than that required, diamines such as putrescine and poliamines are formed. This metabolic disorder can also be correlated with the presence of different inorganic N forms, such as nitrate (NO3) and ammonium (NH4), and the ratios between both ions as well. In order to follow the physiological performance of the interrelationships, K/putrescine and of the NO3/NH4 ratio in the tissue of banana vitroplantlets, shoot apex of two banana cvs. Nanica and Prata Ana were maintained in modified MS medium in the presence of six different doses of K: 5, 10, 15, 20, 25, and 30 mM. After the period of tissue proliferation the cultures were transferred to rooting media containing the same different K doses. Dry matter, K, putrescine, and spermidine contents and their accumulation were determined in the shoots and roots of the vitroplantlets and in the shoot apex of the explant donor cultivar as well as the corresponding values for the whole vitroplantlets calculated. The data were statistically analyzed. The contents and accumulations of putrescine and spermidine in banana tissues were enhanced as K concentration decreased in the medium: four times (0.19% of the dry matter) for cv. Nanica and eight times (0.25% of the dry matter) for cv. Prata Ana. This behavior was not only related to the K depletion but to the NO3/NH4 ratio as well.

Influence of TNF-alpha blockers on the oral prevalence of opportunistic microorganisms in ankylosing spondylitis patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)