Contamination of port zone sediments by metals from Large Marine Ecosystems of Brazil

Sediment contamination by metals poses risks to coastal ecosystems and is considered to be problematic to dredging operations. In Brazil, there are differences in sedimentology along the Large Marine Ecosystems in relation to the metal distributions. We aimed to assess the extent of Al, Fe, Hg, Cd, Cr, Cu, Ni, Pb and Zn contamination in sediments from port zones in northeast (Mucuripe and Pecem) and southeast (Santos) Brazil through geochemical analyses and sediment quality ratings. The metal concentrations found in these port zones were higher than those observed in the continental shelf or the background values in both regions. In the northeast, metals were associated with carbonate, while in Santos, they were associated with mud. Geochemical analyses showed enrichments in Hg, Cd, Cu, Ni and Zn, and a simple application of international sediment quality guidelines failed to predict their impacts, whereas the use of site-specific values that were derived by geochemical and ecotoxicological approaches seemed to be more appropriate in the management of the dredged sediments. (C) 2012 Elsevier Ltd. All rights reserved.

Marine Protected Areas in Brazil: An ecological approach regarding the large marine ecosystems

The objective of this study was to address the importance of implementing Coastal and Marine Protected Areas in Brazil and to examine their distribution, based on the delimitation of Large Marine Ecosystems. Out of a total of 336 protected areas identified in Brazilian coastal and marine areas, the North Platform has the largest protected area, but the ecosystem with the largest number of protected area, predominantly sustainable areas, was the East Coast followed by the South Platform. One of the reasons the eastern coast of Brazil to have more protected areas is the fact that there is a largest amount of coral reefs. Additionally there was political opportunities for the creation of protected areas for sustainable use. The coastal region of Brazil has achieved the goal proposed by the Seventh Conference of the Parties to the Convention on Biological Diversity - 7, but only then through the category V of the International Union for Conservation of Nature, which is not the best efficient means of conserving resources. The goal for marine conservation shows only the area above the recommended under protection in North Platform. The Marine portion of the East Coast and the South Platform has few protected areas, regardless of category management. We consider the coastal region the range of 12 nautical miles from baselines determined in accordance with the United Nations Convention on the Law of the Sea. As for the number of strategies permitted by law and used for the conservation of coastal and marine systems, coastal systems show a higher number when compared with the marine system. We suggest that the Brazilian government should specify strategies for the protection of marine systems and expand the protected areas of all Large Marine Ecosystems. © 2013 Elsevier Ltd.

Populations analysis of the Brazilian Sharpnose Shark Rhizoprionodon lalandii (Chondrichthyes: Carcharhinidae) on the São Paulo coast, Southern Brazil: inferences from mt DNA sequences

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinematic analysis of Labrador Retrievers and Rottweilers trotting on a treadmill

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phylogeography and genetic population structure of Caribbean sharpnose shark Rhizoprionodon porosus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinematic analysis in healthy and hip-dysplastic German Shepherd dogs

This study investigated kinematic patterns in clinically normal German Shepherd dogs (GSDs) compared to those with hip dysplasia and with no clinical signs of lameness. Two groups of GSDs, including 10 clinically healthy dogs (G1) and 10 with hip dysplasia (G2), were trotted on a treadmill at a constant speed. Kinematic data were collected by a 3-camera system and analysed by a motion-analysis program. Flexion and extension joint angles and angular velocities were determined for the shoulder, elbow, carpal, hip, stifle, and tarsal joints.Within each group, the differences between the right and left limbs in all kinematic variables were not significant. Minimum angle, angular displacement and minimum angular velocity did not differ between groups. Significant differences were observed in the maximum angular velocity and maximum angle of the hip joint (dysplastic. >. healthy), and in the maximum angular velocity of the carpal joint (healthy. >. dysplastic). It was concluded that, when trotting on a treadmill, dysplastic dogs with no signs of lameness may present joint kinematic alterations in the hind as well as the forelimbs. © 2012 Elsevier Ltd.

Kinematic analysis of forelimb and hind limb joints in clinically healthy sheep

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dysphonia and laryngeal sequelae in paracoccidioidomycosis patients: a morphological and phoniatric study

The larynx is the third most commonly involved organ in paracoccidioidomycosis (PCM). While a few studies have evaluated laryngeal sequelae, there have not been any investigations of voice abnormalities in PCM patients. To evaluate persistent dysphonia and laryngeal lesions, we studied 15 normal subjects and 30 post-treatment PCM patients, i.e., 15 with only pulmonary and 15 with both laryngeal and pulmonary involvement. Perceptual and acoustic voice analysis were performed with all patients, while endoscopic studies were also conducted with the 15 laryngeal patients. Voice analysis showed instability by perceptual analysis (P < 0.01) in both groups, but more severe dysphonia was noted in the laryngeal group (P < 0.01). The dysponia, seen in 66.7% of these patients (dysphonia index < 7.0), was characterized by roughness and breathness. The Dr. Speech (Tiger Electronics) analysis program did not accept five voices from the laryngeal group due to the severe dysphonia. Jitter was elevated in five laryngeal lesion patients. Endoscopy showed that 80% of patients with laryngeal lesion had two or more laryngeal structures involved. Vocal fold alterations were seen in all laryngeal lesion patients, which included involvement of the arythenoids, epiglottis, and vestibular folds. This first functional study of laryngeal sequelae in PCM revealed frequent and severe dysphonia that may have important social consequences for patients.

Study of stress distribution with finite element method in a root with prefabricated threaded split shaft post - Part I

A finite element analysis was carried out to study the role of prefabricated threaded split shaft post (Flexi-Post) on dentinal stress in pulpless tooth. Three dimensional plane strain model of mesio-distal section of a human maxillary central incisor without restoration was analysed with the MSC/NASTRAN (MacNeal/ Schwendler) general purpose finite analysis program was executed on a microcomputer. The model as discretized into 48.954 axisymmetric finite elements defined by 10.355 nodes. Each element was assigned unique elastic properties to represent the materials modeled. Homogeneity, isotropy and linear elasticity were assume for all material. A simulation of static load of 100N was applied to the incisal edge of the post; vertical. Maximal principal stresses and von Mises equivalent stress were calculated. Using the element analysis model employed in this study, the following can be concluded concerning threaded split shaft post (Flexi-Post): Maximum principal stresses in dentin were located at cervical place and at the post apex. The apical threads of the post not redirecting stresses away from the root.

Drill holes in shells of Permian benthic invertebrates

Newly discovered benthic fossils and specimens illustrated in the paleontological literature indicate that drilling predators (or parasites) were present in the Permian. New field data from southern Brazil document the first drill holes ever reported for Permian bivalve mollusks. In addition, a literature review revealed drill holes in shells of articulate brachiopods from Russia, Greece, and West Texas. Holes range in size from 0.1 to 5.8 mm and are typically round, cylindrical, singular penetrations perpendicular to the valve surface. Incomplete, healed, and multiple holes are absent. Drilling frequency, a proxy for predation intensity, is very low: less than 1 percent (this estimate may be seriously affected by taphonomic and monographic biases). Literature data suggest that frequency of drilled specimens varied significantly among higher brachiopod taxa. The geography and stratigraphy of drilled specimens indicate that drilling organisms were worldwide in their occurrence and continuously present in marine ecosystems throughout the Permian. This report is consistent with other recent studies indicating that although drillers were continuously present throughout the Phanerozoic, drilling intensity was lower in the Late Paleozoic and early Mesozoic.

Influence of surface sealants on microleakage of composite resin restorations

Purpose: The purpose of this study was to verify the influence of surface sealants and dentin adhesive systems on the microleakage of composite restorations. Methods: Class V cavities were made on the buccal faces of 100 permanent third molars and restored with Z250. After 24 hours, they were submitted to polishing and finishing processes. The teeth were divided into groups according to the sealant agent: group 1 - Single Bond; group 2 - Opti Bond Solo Plus; group 3 - Fortify; group 4 - Fortify Plus; and group 5 - control without sealant. The analysis of immediate microleakage was performed in 10 restorations from each group, soon after the sealing. The other 10 specimens from each group were submitted to tooth-brushing and thermal cycles. The teeth were isolated and immersed in 2% methylene blue solution, washed in tap water, and sectioned in the buccolingual direction. The percentage of marginal leakage was calculated using an image analysis program, and results were submitted to analysis of variance and Tukey's test. Results: All the sealed groups demonstrated lower microleakage values compared to the control group. Group 3, sealed with Fortify, presented the lowest mean microleakage values. Conclusion: The application of surface sealants effectively decreased the microleakage in composite resin restorations.

Cinemática de cães da raça pastor alemão hígidos em displasia coxofemoral

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise teórico-experimental de um tabuleiro misto madeira-concreto composto por vigas circulares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biodisponibilidade de metais na baía da Ilha Grande, RJ: avaliação pelas técnicas de bivalves transplantados (Nodipecten nodosus) e difusão de filmes finos por gradiente de concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistência da linha de cola em superfícies lixadas da madeira de eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)