Equação de regressão linear múltipla para estimativa do erro experimental

Este trabalho teve por objetivo estimar equações de regressão linear múltipla tendo, como variáveis explicativas, as demais características avaliadas em experimento de milho e, como variáveis principais, a diferença mínima significativa em percentagem da média (DMS%) e quadrado médio do erro (QMe), para peso de grãos. Com 610 experimentos conduzidos na Rede de Ensaios Nacionais de Competição de Cultivares de Milho, realizados entre 1986 e 1996 (522 experimentos) e em 1997 (88 experimentos), estimaram-se duas equações de regressão, com os 522 experimentos, validando estas pela análise de regressão simples entre os valores reais e os estimados pelas equações, com os 88 restantes, observando que, para a DMS% a equação não estimava o mesmo valor que a fórmula original e, para o QMe, a equação poderia ser utilizada na estimação. Com o teste de Lilliefors, verificou-se que os valores do QMe aderiam à distribuição normal padrão e foi construída uma tabela de classificação dos valores do QMe, baseada nos valores observados na análise da variância dos experimentos e nos estimados pela equação de regressão.

Comparison of non-linear growth models to describe the growth curve in West African Dwarf sheep

The objectives of this study were to compare the goodness of fit of four non-linear growth models, i.e. Brody, Gompertz, Logistic and Von Bertalanffy, in West African Dwarf (WAD) sheep. A total of 5274 monthly weight records from birth up to 180 days of age from 889 lambs, collected during 2001 to 2004 in Betecoucou breeding farm in Benin were used. In the preliminary analysis, the General Linear Model Procedure of the Statistical Analysis Systems Institute was applied to the dataset to identify the significant effects of the sex of lamb (male and female), type of birth (single and twin), season of birth (rainy season and dry season), parity of dam (1, 2 and 3) and year of birth (2001, 2002, 2003 and 2004) on the observed birth weight and monthly weight up to 6 months of age. The models parameters (A, B and k), coefficient of determination (112), mean square error (MSE) were calculated using language of technical computing package Matlab(R), 2006. The mean values of A, B and k were substituted into each model to calculate the corresponding Akaike's Information Criterion (AIC). Among the four growth functions, the Brody model has been selected for its accuracy of fit according to the higher R(2), lower MSE and A/C Finally, the parameters A, B and k were adjusted in Matlab(R) 2006 for the sex of lamb, year of birth, season of birth, birth type and the parity of ewe, providing a specific slope of the Brody growth curve. The results of this study suggest that Brody model can be useful for WAD sheep breeding in Betecoucou farm conditions through growth monitoring.

Genetic relationships among Arachis species based on AFLP

Amplified Fragment Length Polymorphism (AFLP) was used to establish the genetic relationships among 20 species from seven of the nine sections of genus Arachis. The level of polymorphism among nine accessions of the cultivated peanut, A. hypogaea L., was also evaluated. Three combinations of primers were used to amplify the AFLPs. The fragments were separated in 6% denaturing acrylamide gels. A total of 408 fragments were analyzed. An average of 135.3 fragments per primer combination were scored, and the largest number of fragments was 169 using primer combination Eco RI - ACC / Mse I - CTG, while the lowest was 108, with Eco RI - ACT / Mse I - CTT. In general, the genetic relationships established using AFLPs agreed with the classification established using morphology and crossability data. The results indicated that AFLPs are good markers for establishing the relationships among Arachis species. The polymorphism detected in A. hypogaea by this method was higher than the one found with other markers, like RAPDs and RFLPs. However, our data suggest that the polymorphism detected be using AFLP with only three primer combinations is still too low to be used for any kind of genetic study in this species.

Photo-electrochemical investigation of anodic oxide films on cast Ti-Mo alloys I. Anodic behaviour and effect of alloy composition

The anodic behaviour of cast Ti-Mo alloys, having different Mo contents (6-20 wt.%), was investigated in acidic and neutral aerated aqueous solutions. All sample showed a valve-metal behaviour, owing to formation and thickening of barrier-type anodic oxides displaying interference colours Growth kinetics. of passive films is influenced by both anodizing electrolyte and composition of the starting alloy. This last parameter was found to change also the solid-state properties of the films, explored by photoelectrochemical and impedance spectroscopy experiments. Thicker films (U(f) = 8 V/MSE) grown on alloys richer in Mo showed more resistive character and a photocurrent sign inversion under negative bias, that revealed an insulating character, whereas corresponding films grown on alloys with lower Mo content, as well as thinner films, behaved as n-type semiconductors. Results are discussed in terms of formation of a mixed Ti-Mo oxide phase. (C) 2008 Elsevier Ltd. All rights reserved

Inferência espacial de cianobactérias a partir da fluorescência in vivo do pigmento ficocianina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimadores da resistência mecânica característica da madeira

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

The influence of the use of stabilizer bracelet in a child with choreoathetoid cerebral palsy

Introduction: The use of stabilizer bracelet is a frequent treatment for movement disorders to strengthen muscles and adjust coordination. Still questions remain regarding the benefi t of using loads to decrease involuntary movements and the best load and placement. Objective: To measure the infl uence of the stabilizer bracelet on the kinematics and spatiotemporal parameters in planar movements performed by the upper limb. Method: One child, who has the spastic diplegy type of cerebral palsy with choreoathetoid component, and a control child without cerebral palsy, both female and 7 years old, were subjected to analysis of movements in relation to displacement, velocity, linear acceleration, and the calculation of mean square error (MSE) with and without use of stabilizer bracelet with loads of 25, 50, and 75% of the supported maximum load. Results: After comparing data between subjects, a difference was found between patient and control in all situations and variables. An inter-individual comparison using 25% of the maximum load showed the smallest difference with the NDE. Discussion and Conclusion: This therapeutic option is low cost, easy to apply, and does not signifi cantly interfere in the aesthetic of the individual. Therefore, physiotherapists may prescribe this for activities that require greater control of the upper limb because for the case studied the upper limb movement was more effi cient with the use of the stabilizer bracelet.

Avaliação de Técnicas de Interpolação de Imagens Digitais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Melhoria do planejamento para o fornecimento de materiais de modificações em aeronaves executivas

This paper presents a material demand forecasting to executive aircrafts modifications, the objective was to determinate a cadence of kits of materials in order reduce over stock, but also keeping the customer quality support. This work was motivated by the strong tendency that the market has to cut costs, especially those that do not add value to the product, waste. To solve the problem the Poisson probability distribution was used and also the error measures MPE, MAPE and MSE. At the end, after some adjustments, we found a satisfactory model for the problem

Sistema baseado em regras fuzzy do tipo Takagi-Sugeno aplicado a ecos de radares meteorológicos

Pós-graduação em Ciências Ambientais - Sorocaba

Processo educacional de crianças com Transtorno do Espectro Autista na Educação Infantil: interconexões entre contextos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nanoestruturas de GaN crescidas pelas técnicas de epitaxia por magnetron sputtering e epitaxia por feixe molecular

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)