Ciclamato de sódio em refrigerantes de baixa caloria

Sodium cyclamate contents in the widely consumed low calorie soft drinks were determined. Low calorie soft drinks made from cola, guarana, orange, lemon and grape were analyzed following the technique described by Sjörberg and Alanko (1987), with some modifications. The methodology recovery assays were carried out at three spiked levels, and the average recovery of 92.5% and 110.3% were found in cola and guarana, respectively; and the relative standard deviation was of 3.7%. The average sodium cyclamate contents ranged from 27.1 ± 1.1 (cola A) to 127.3 ± 1.5 mg.100 mL-1 (lemon B), indicating that the acceptable daily intake of the sweetener can be easily exceeded after drinking low calorie beverages. All of the analyzed low calorie soft drinks showed sodium cyclamate contents higher than those stated on the label, ranging from 12.9% (cola A) to 19.0% (lemon B). Among 18 low calorie soft drinks analyzed, only four showed the average sodium cyclamate contents in accordance with the maximum limit permitted by Brazilian legislation, that is 40 mg.100 mL-1 of beverage; and in other samples the sweetener exceeded ranging from 74.8% (orange) to 218.3% (lemon B) above of the limit permitted.

Development of a potentiometric sensor for the determination of saccharin in instant tea powders, diet soft drinks and strawberry dietetic jam

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Openability of soft drinks PET packagings

Studies on packaging accessibility are still incipient in Brazil. Many of these packagings can represent a challenge to users, whether due to non-informative labels, tricky tabs or seals, or even those that need strength to open. This paper brings a simple test to determine the necessary torque force to open PET bottles, and to predict the amount of users that could not open it. The findings suggest that a considerable amount of users could not open it or would have some difficulties to exert the necessary force.

Electrothermal AAS determination of Ni in soft drinks using Co as the internal standard

A method for the direct determination of Ni in soft drinks by graphite furnace atomic absorption spectrometry using a transversely heated graphite atomizer (THGA), Zeeman-effect background corrector, and Co as the internal standard (IS) is proposed. Magnesium nitrate was used to stabilize both Ni and Co. All diluted samples (1+1) in 0.2% (v/v) HNO3 and reference solutions [5.0-50 mu g L-1 Ni in 0.2% (v/v) HNO3] were spiked with 50 mu g L-1 Co. For a 20-mu L sample dispensed into the atomizer, correlations between the ratio of absorbance of Ni to absorbance of Co and the analyte concentration were close to 0.9996. The relative standard deviation of the measurements varied from 0.5 to 3.4% and 1.0 to 7.0% (n=12) with and without IS, respectively. Recoveries within 98-104% for Ni spikes were obtained using IS. The characteristic mass was calculated as 43 pg Ni and the limit of detection was 1.4 mu g L-1. The accuracy of the method was checked for the direct determination of Ni in soft drinks and the results obtained with IS were better than those without IS.

The effect of different sweeteners in low-calorie yogurts - a review

Recently, increased demand for low-calorie products and foods with alternative sweeteners has gained special attention. Intense sweeteners avoid the problems of health risks associated with caloric sweeteners. This paper presents information about the technical characteristics of the more widely used artificial sweeteners and the possibility of their application in low-calorie yogurts.

Chronic consumption of fructose rich soft drinks alters tissue lipids of rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Heuristics and meta-heuristics for lot sizing and scheduling in the soft drinks industry: A comparison study

This chapter studies a two-level production planning problem where, on each level, a lot sizing and scheduling problem with parallel machines, capacity constraints and sequence-dependent setup costs and times must be solved. The problem can be found in soft drink companies where the production process involves two interdependent levels with decisions concerning raw material storage and soft drink bottling. Models and solution approaches proposed so far are surveyed and conceptually compared. Two different approaches have been selected to perform a series of computational comparisons: an evolutionary technique comprising a genetic algorithm and its memetic version, and a decomposition and relaxation approach. © 2008 Springer-Verlag Berlin Heidelberg.

Supplementation of soft drinks with metallic ions reduces dissolution of bovine enamel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bone mineral density evaluation in rats submitted to daily diet of coffee and soft drinks

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development of a synbiotic low-calorie beverage made from soy and yacon extracts

The objective of this study was to develop a new low-calorie symbiotic beverage made from yacon (prebiotic source) and soy extracts, containing probiotic Bifidobacterium animalis ssp. lactis BB-12. The synbiotic beverage was first produced with a range of sucrose concentrations in order to determine ideal sweetness by an acceptance test using a “just-about-right scale”. Sucrose was then replaced by sucralose or aspartame to produce sugar-free beverages. Characteristics including viable cell numbers, physicochemical properties, sensorial characteristics and fructooligosaccharides content were investigated. The ideal sweetness of the beverages with sucrose, aspartame and sucralose were 7.28%, 0.0486% and 0.0167%, respectively. Sucralose exhibited higher scores in acceptance test and was used to replace sucrose in the low-calorie symbiotic beverage. The synbiotic beverage exhibited counts of Bifidobacterium spp. of 108 CFU·mL-1 , sufficient condition to be considered probiotic. The chemical composition of the product was (g/100 g): 2.91 of protein, 1.41 of fat, 2.41 of total carbohydrate; 0.82 of FOS and 148.22 Kj of energy value. The synbiotic beverage developed in this study may be successful in health applications, due to their functional ingredients (soy, probiotic bacteria and yacon prebiotics) that can afford benefits to health or can present disease-preventing properties, beyond their inherent nutritional value. In addition this low-calorie beverage can be consumed by diabetic individuals and people concerned about the ingestion of calories.

Isotopic analysis method (δ13C) in apple-flavoured soft drinks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of ion supplementation of a commercial soft drink on tooth enamel erosion

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of 4% titanium tetrafluoride solution on dental erosion by a soft drink: An in situ/ex vivo study

Objective: This in situ/ex vivo study assessed the effect of titanium tetrafluoride (TiF4) on permanent human enamel subjected to erosion.Design: Ten volunteers took part in this study performed in two phases. In the first phase (ERO), they wore acrylic palatal appliances containing two enamel blocks, divided into two rows: TiF4 (F) and no-TiF4 (no-F). During the 1st day, the formation of a salivary pellicle was allowed. In the 2nd day, the TiF4 solution was applied on one row (ERO + F), whereas on the other row no treatment was performed (ERO + no-F). From 3rd until 7th day, the blocks were subjected to erosion, 4x per day. In the 2nd phase (no-ERO), the volunteers wore acrylic palatal appliances containing one enamel block, during 2 days, to assess the effect of TiF4 only (no-ERO + F). Enamel alterations were determined using profilometry (wear), microhardness (%SMHC) tests, scanning electron microscope and microprobe analysis. The %SMHC and wear were tested using ANOVA and Tukey's post hoc tests (p < 0.05).Results: The mean of %SMHC and wear ( mu m) values ( +/- S.D.) were, respectively: ERO + F -73.32 +/- 5.16(A)/2.40 +/- 0.60(a); ERO + no-F -83.49 +/- 4.59B/1.17 +/- 0.48(b) and no-ERO + F -67.92 +/- 6.16(A)/0.21:E 0.09(c). In microscope analysis, the no-F group showed enamel with honeycomb appearance. For F groups, it was observed a surface coating with microcracks. The microprobe analysis revealed the presence of the following elements (%) in groups ERO + F, ERO + no-F and no-ERO + F, respectively: Ca (69.9, 72.5, 66.25); P (25.9, 26.5, 26.06); Ti (3.0, 0, 5.93).Conclusions: The TiF4 was unable to reduce dental erosion. (c) 2007 Elsevier Ltd. All rights reserved.

Acerola: importance, culture conditions, production and biochemical aspects

Origin and importance. Acerola, or Malpighia emarginata D. C., is native to the Caribbean islands, Central America and the Amazonian region. More recently, it has been introduced in subtropical areas (Asia, India and South America). The vitamin C produced by acerola is better absorbed by the human organism than synthetic ascorbic acid. Exportation of acerola crops is a potential alternative source of income in agricultural businesses. In Brazil, the commercial farming of acerola is quite recent. Climatic conditions. Acerola is a rustic plant. It can resist temperatures close to 0 degrees C, but it is well adapted to temperatures around 26 degrees C with rainfall between (1200 and 1600) mm per year. Fruit characteristics. Acerola fruit is drupaceous, whose form can vary from round to conic. When ripe, it can be red, purple or yellow. The fruit weight varies between (3 and 16) g. Maturation. Acerola fruit presents fast metabolic activity and its maturation occurs rapidly. When commercialised in ambient conditions, it requires fast transportation or the use of refrigerated containers to retard its respiration and metabolism partially. Production and productivity. Flowering and fruiting are typically in cycles associated with rain. Usually, they take place in 25-day cycles, up to 8 times per year. The plant can be propagated by cuttings, grafting or seedlings. Harvest. Fruits produced for markets needs to be harvested at its optimal maturation stage. For distant markets, they need to be packed in boxes and piled up in low layers; transportation should be done in refrigerated trucks in relatively high humid conditions. Biochemical constituents. Acerola is the most important natural source of vitamin C [(1000 to 4500) mg.100(-1) g of pulp], but it is also rich in pectin and pectolytic enzymes, carotenoids, plant fibre, vitamin B, thiamin, riboflavin, niacin, proteins and mineral salts. It has also shown active anti-fungal properties. Products and market. Acerola is used in the production of juice, soft drinks, gums and liqueurs. The USA and Europe are great potential markets. In Europe, acerola extracts are used to enrich pear or apple juices. In the USA, they are used in the pharmaceutical industry. Conclusions. The demand for acerola has increased significantly in recent years because of the relevance of vitamin C in human health, coupled with the use of ascorbic acid as an antioxidant in food and feed. Acerola fruit contains other significant components, which are likely to lead to a further increase in its production and trade all over the world.