Study of the effect of the peptide loading and solvent system in SPPS by HRMAS-NMR

The SPPS methodology has continuously been investigated as a valuable model to monitor the solvation properties of polymeric materials. In this connection, the present work applied HRMAS-NMR spectroscopy to examine the dynamics of an aggregating peptide sequence attached to a resin core with varying peptide loading (up to 80%) and solvent system. Low and high substituted BHAR were used for assembling the VQAAIDYING sequence and some of its minor fragments. The HRMAS-NMR results were in agreement with the swelling of each resin, i.e. there was an improved resolution of resonance peaks in the better solvated conditions. Moreover, the peptide loading and the attached peptide sequence also affected the spectra. Strong peptide chain aggregation was observed mainly in highly peptide loaded resins when solvated in CDCl3. Conversely, due to the better swelling of these highly loaded resins in DMSO, improved NMR spectra were acquired in this polar aprotic solvent, thus enabling the detection of relevant sequence-dependent conformational alterations. The more prominent aggregation was displayed by the VQAAIDYING segment and not by any of its intermediary fragments and these findings were also corroborated by EPR studies of these peptide-resins labelled properly with an amino acid-type spin probe. Copyright (c) 2005 European Peptide Society and John Wiley & Sons, Ltd.

A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the parafunctional occlusal loading and crown height on stress distribution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bem-estar animal no manejo pré-abate e a influência na qualidade da carne suína e nos parâmetros fisilógicos do estresse

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise de extração de madeira de eucalipto com forwarder em floresta de primeira e segunda rotação

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Dinâmica econômica e recentes transformações no transporte marítimo de cabotagem e longo curso no Brasil: alguns apontamentos sobre a modernização portuária no Estado de São Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bem estar animal no transporte e a influência na qualidade da carne suína

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de extensões para um sistema de carregamento e descarregamento de navios

One of the reasons that influences the efficience of a port terminal that is especialized in movement of containers is in the process of their loading and unloading. The fundamental idea is to determine a plan, to each port in order to decrease the number of total movement of loading and unloading that are necessary during the ship route to every port so that they save time and consequently reduce costs. The goal of this research was to present improvement in the program, written in language C, used to solve to problem of loading and unloading of ships, a NP-complete problem, through the meta-heuristics Simulated Annealing. With the improvement made, an average of 50% reduction of necessary time was gotten to solve the problem in 45 analised instances and in a specific group of these instances the average reduction reached 77 and in 10 instances there was even an improvement in the solution

Resolução do problema de carregamento e descarregamento de contêineres em terminais portuários via Beam Search

One problem that has been happening frequently in port terminals is the poor planning of the loading and unloading of containers. The reason of this problem is the lack of an efficient method that provides the best means of these operations. The main goal of this work is, to implement a method that provides the best ways to perform the loading and unloading of containers, at each port and thus bring a great saving for these terminals, since the number of moves is directly proportional to cost. To carry out this program was used the idea that the containers are placed in vertical stacks, where the access can be done only by the top of the stack, so the ship was treated as an matrix and to fill it, two rules were created for loading and two for unloading. To obtain the best sequence of rules was used Beam Search method, which is an enumeration type implicit method that analyzes only the best solution of the tree generated. Thus, the program developed in the Java language, provides the best way to perform the loading and unloading ports and the way as the ship leaves each port using a graphical interface

Avaliação técnica e econômica do forwarder na extração de madeira em povoamento de eucalipto de primeiro corte

This study aimed to technically and economically evaluate the Forwarder performance in the first cutting wood extraction from a Eucalyptus grandis plantation. Technical analysis included a movement and timing study by continuous method, and the productivity was determined using the extracted wood volume in cubic meters. Economical analysis included operational costs parameters and wood extraction cost. Results referred to the effective operational performance. Loading and unloading activities responded for more than ¾ of the total time of effective Forwarder operational cycle. Operational costs were influenced by maintenance and repair costs. The estimated cost of extraction was US$ 0.97 per cubic meter.

Hindlimb unloading producing effects on bone biomechanical properties in mature male rats

Aging is associated with decline in muscle mass and strength and reduced bone density. Age-related bone loss is a primary factor in osteoporosis and all individuals are potential candidates for osteoporosis because bone loss with aging occurs in men and women, but less studied in men. To examine the appropriateness of hindlimb elevation, by tail suspension as a model for diminished mechanical loading, and to determine the influence of age on bone responsiveness to skeletal unloading, we use dual X ray absorptiometry (DXA) and digital radiographic images to analyze the response of the femur from mature rats to biomechanical loads. Femurs from male Wistar rats (9-mo-old) were scanned using DXA and DIGORA and measures obtained in ephipyseal and diaphyseal regions of interest. The mechanical testing was divided into compression load to fracture the head and a three-point bending load to fracture the femur middiaphysis. In femoral epiphysis from hindlimb unload (HU), animals presented significant differences between mineral bone content and density assessed by DXA. Detailed regions of femoral epiphysis (head, throcanteric fossa, throcanter and metaphysis) presented significant lower values from radiographic density. Only compressive load necessary to fracture the femoral head neck was also significantly diminished in HU animals. Disuse induced, as in elderly patients, deterioration of the trabecular bone architecture with critical effect on bone fragility. Rats with 21 days of hindlimb unloading can simulate disuse, suggesting that certain sub-regions of their aging bones are more susceptible to fracture, while other, i.e. diaphyses, are not.

Effects of flunixin meglumine administration on physiological and performance responses of transported feeder cattle

The objective was to evaluate the effects of flunixin meglumine administration on physiological and performance responses of transported cattle during feedlot receiving. Forty-five Angus x Hereford steers were ranked by BW on d 0 and assigned to 1 of 3 treatments:1) transport for 1,280 km in a commercial livestock trailer and administration of flunixin meglumine (1.1 mg/kg BW; intravenous) at loading (d 0) and unloading (d 1; FM), 2) transport for 1,280 km in a commercial livestock trailer and administration of 0.9% saline (0.022 mL/kg BW; intravenous) at loading (d 0) and unloading (d 1; TRANS), or 3) no transport and administration of 0.9% saline (0.022 mL/kg BW; intravenous) concurrently with loading (d 0) and unloading (d 1) of FM and TRANS cohorts (CON). Upon arrival and processing for treatment administration on d 1, steers within each treatment were ranked by BW and assigned to 15 feedlot pens (5 pens/treatment, 3 steers/pen). Full BW was recorded before (d -1 and 0) treatment application and at the end of experiment (d 28 and 29) for ADG calculation. Total DMI was evaluated daily from d 1 to 28. Blood samples were collected on d 0 (before treatment administration), 1 (after unloading but before treatment administration), 4, 7, 10, 14, 21, and 28. Body weight shrink from d 0 to 1 was less (P < 0.01) in CON vs. FM and TRANS but similar (P = 0.94) between TRANS and FM. Mean ADG was greater (P <= 0.04) in CON vs. FM and TRANS but similar (P = 0.69) between TRANS and FM. No treatment effects were detected on DMI, but CON had greater G:F vs. TRANS (P = 0.08) and FM (P = 0.02), whereas G:F was similar (P = 0.68) between TRANS and FM. Mean plasma cortisol concentrations tended (P <= 0.09) to be greater in TRANS vs. FM and CON but was similar (P = 0.87) between CON and FM. Plasma NEFA concentrations were greater (P <= 0.02) for TRANS and FM vs. CON on d 1 and greater (P <= 0.04) for FM vs. TRANS and CON on d 4. Plasma ceruloplasmin concentrations were greater (P <= 0.03) for TRANS vs. CON on d 1, 4, and 7, greater (P <= 0.05) for TRANS vs. FM on d 4 and 7, and greater (P <= 0.04) for FM vs. CON on d 1 and 4. Plasma haptoglobin concentrations were greater (P < 0.01) for TRANS vs. CON and FM on d 1 and 4 and greater (P <= 0.05) for FM vs. CON on d 1 and 4. In conclusion, flunixin meglumine reduced the cortisol and acute-phase protein responses elicited by road transport but did not improve receiving performance of feeder cattle.

Resistance to impact of cross-linked denture base biopolymer materials: Effect of relining, glass flakes reinforcement and cyclic loading

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Encapsulation of Local Anesthetic Bupivacaine in Biodegradable Poly(DL-lactide-co-glycolide) Nanospheres: Factorial Design, Characterization and Cytotoxicity Studies

Local anesthetic agents cause temporary blockade of nerve impulses productiong insensitivity to painful stimuli in the area supplied by that nerve. Bupivacaine (BVC) is an amide-type local anesthetic widely used in surgery and obstetrics for sustained peripheral and central nerve blockade. in this study, we prepared and characterized nanosphere formulations containing BVC. To achieve these goals, BVC loaded poly(DL-lactide-co-glycolide) (PLGA) nanospheres (NS) were prepared by nanopreciptation and characterized with regard to size distribution, drug loading and cytotoxicity assays. The 2(3-1) factorial experimental design was used to study the influence of three different independent variables on nanoparticle drug loading. BVC was assayed by HPLC, the particle size and zeta potential were determined by dynamic light scattering. BVC was determined using a combined ultrafiltration-centrifugation technique. The results of optimized formulations showed a narrow size distribution with a polydispersivity of 0.05%, an average diameter of 236.7 +/- 2.6 nm and the zeta potential -2.93 +/- 1,10 mV. In toxicity studies with fibroblast 3T3 cells, BVC loaded-PLGA-NS increased cell viability, in comparison with the effect produced by free BVC. In this way, BVC-loaded PLGA-NS decreased BVC toxicity. The development of BVC formulations in carriers such as nanospheres could offer the possibility of controlling drug delivery in biological systems, prolonging the anesthetic effect and reducing toxicity.

Abordaje práctico sobre cómo mejorar el bienestar en los bovinos

Current challenges of humanity require a new paradigm for animal production, and invest time and attention to the development of new production techniques that take into account the principles of sustainability and animal welfare science. To do this, we must be committed to promoting animal welfare and health, ensure environmental sustainability, consumer satisfaction and profitability for producers. To change our relationship with animals there is no need for changes in market conditions or large investments, it is enough to know better the needs of the animals we raise, the management system adapted to its characteristics. Even in the most favorable management conditions, on farms that have technological resources and trained personnel, there is much to change, especially in the daily management of the animals. Some of the risks more evident in the traditional systems of beef production are: problems during parturition, morbidity and mortality of calves, lack of shade in the pastures, improper handling of animals, risk of injury, inadequate infrastructure, poor management practices during routine processing (marking, castration, vaccination, dehorning), poor welfare during loading, transport, unloading and slaughter. To remedy this, you can adopt good management practices, which have been shown to reduce risk and improve the welfare of cattle in different stages of the production chain. The objective of this review is to show some of the risks that reduce the welfare of cattle and examples of how the adoption of best management practices impact on improving the productivity of these production systems. Finally, some indicators for assessing welfare in production systems are shown.