A load cell for grain-propelled ballistic rocket thrust measurement

A 1000-kgf resistive strain-gauge load cell has been developed for quality testing of rocket propellant grain. A 7075-T6 aluminum alloy has been used for the elastic column, in which 8 uniaxial, 120-Ω strain gauges have been bonded and connected to form a full Wheatstone bridge to detect the strain. The chosen geometry makes the transducer insensitive to moments and, also, to the temperature. Experimental tests using a universal testing machine to imposed compression force to the load cell have demonstrated that its behavior is linear, with sensitivity of 2.90 μV/kgf ± 0.34%, and negligible hysteresis. The designed force transducer response to a dynamic test has been comparable to that of a commercial load cell. © 2005 IEEE.

Utilização do intercepto-y na avaliação da aptidão anaeróbia e predição da performance de nadadores treinados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of light-curing units on push-out fiber post bond strength in root canal dentin

The purpose of this study was to evaluate the effectiveness of different light-curing units on the bond strength (push-out) of glass fiber posts in the different thirds of the root (cervical, middle and apical) with different adhesive luting resin systems (dual-cure total-etch; dual-cured and self-etch bonding system; and dual-cure self-adhesive cements), Disks of the samples (n = 144) were used, with approximately 1 mm of thickness of 48 bovine roots restored with glass fiber posts, that were luted with resin cements photo-activated by halogen LCU (QTH, Optilux 501) and blue LED (Ultraled), with power densities of 600 and 550 mW/cm 2, respectively. A universal testing machine (MTS 810 Material Test System) was used with a 1 mm diameter steel rod at cross-head speed of 0.5 mm/min until post extrusion, with load cell of 50 kg, for evaluation of the push-out strength in the different thirds of each sample. The push-out strength values in kgf were converted to MPa and analyzed through Analysis of Variance and Tukey's test, at significance level of 5%. The results showed that there were no statistical differences between the QTH and LED LCUs. The self-adhesive resin cement had lower values of retention. The total-etch and self-adhesive system resin cements seem to be a possible alternative for glass fiber posts cementation into the radicular canal and the LED LCU can be applied as an alternative to halogen light on photo-activation of dual-cured resin cements. © 2009 Pleiades Publishing, Ltd.

Geotechnical and structural behavior of the railroad track in large-scale apparatus

This paper analyses the static and dynamic behavior of the railroad track model in laboratory. Measurements of stresses and strains on a large-scale railroad track apparatus were studied. The model includes: compacted soil, representing the final layers of platform, ballast layer, and ties (steel, wooden, and pre-stressed concrete). The soil and soil ballast interface were instrumented with pneumatic stress gauge. Settlement measurement device were positioned at the same levels as the load cells. Loads were applied by hydraulic actuators, statically and dynamically. After the prescribed number of load cycles, in pre-determined intervals, stresses and strains were measured. Observations indicate that stress and strain distributions, transmitted by wooden or steel ties, behave similarly. A more favorable behavior was observed with pre-stressed concrete mono block ties. Non-linear response was observed after a threshold numbers of cycles were surpassed, showing that the strain modulus increases with the numbers of cycles. © 2009 IOS Press.

Plataforma para medição de forças na região plantar de pacientes normais e hemiplégicos

This work describes an electronic system implementation with two force plates, 24 load cells with strain gages, signal conditioning circuit, interfacing circuit and data acquisition system, designed for measuring plantar force distribution in patients. The system presented linear response, low hysteresis, with determination coefficient of 0.9997, precision better than 0,84% and resolution less than 0.5 N. The Measurements are presented on a computer screen and easier visualization to specialists, mainly physicians, physiotherapists and occupational therapists. Using the system, the distribution of weight in the plantar region of 100 normal subjects and 10 hemiplegic patients was investigated. There were determined the relationship between weight distribution on the right and left forefoot, hemiplegic patients and normal patients, with the implemented system. © 2013 Springer.

Coeficientes de cultura para a melancieira irrigada por gotejamento no Vale do Gurgueia - PI

The aim of this work was to determine crop coefficients (Kc) of drip irrigated watermelon in the climatic and growing conditions of the Gurgueia Vale, State of Piaui, Brazil, located at 8 ° 26' S, 43 ° 47' W and altitude of 251 m. The reference evapotranspiration (ET0) was determined by the sum of hourly values of ET0 obtained by the Penman-Monteith method parameterized by FAO with climatic data obtained from an automatic weather station. The daily crop evapotranspiration (ETc) was measured by three weighing lysimeters of load cells. Aiming high fruit yield in this region, we recommend that the following local values of Kc and Kcb be used for planning and management of irrigation, respectively: initial stage (crop establishment) - 0.34 and 0.24; intermediate stage (growth and fruit maturation) - 1.16 and 1.10; end stage (harvest) - 0.93 and 0.86. These Kc values of initial and intermediate phases are statistically higher than the values of Kc and Kcb already adjusted according to the methodology presented in the FAO Irrigation and Drainage Paper 56. The values of Kc and Kcb at the end phase are not statistically different from the FAO values.

Sistema microcontrolado para medição de forças na região plantar e nos membros superiores de pacientes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Plataforma de força para aplicações biomédicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Medição da descarga de peso de indivíduos hemiplégicos e não hemiplégicos utilizando uma nova plataforma de força

Pós-graduação em Engenharia Elétrica - FEIS

Qualidade de cavacos produzidos em sistemas florestais de curta rotação de eucalipto para fins energéticos

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Análise da distribuição de cargas e das forças entre asseno e encosto, na postura sentada adequada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um sistema informatizado de menor custo para aquisição e armazenamento de dados de sensores analógicos e receptor GPS

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hastes instrumentadas com controle automatizado do escarificador atuando em profundidades variáveis

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Análise das variáveis eletromiográficas e da pressão plantar na marcha em aclive, declive e plano

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da reeducação postural global (RPG) sobre a distribuição do peso corporal e atividade eletromiográfica na postura sentada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)