Life cycle assessment applied to municipal solid waste management: a case study

This study analyzes the environmental performance of the Municipal Solid Waste Management System (MSWMS) of Piedade, São Paulo, from a systemic perspective. A life cycle assessment (LCA) technique was applied according to an attributional approach to evaluate both the current operational situation and different prospective scenarios, which were devised based on the application of targets for recycling dry and wet waste suggested by the pre-draft version of the Brazilian Plan for Solid Waste. The life cycle impact assessment method EcoIndicator 99, in association with normalization and weighting procedures, was used to conduct the analysis. It was observed that the adoption of goals of 30%, 50% and 70% for recovering of the recyclable dry waste, resulted in improvement of the environmental performance of the waste management system under analysis, respectively of 10%, 15% and 20%. It was also possible to detect an evolution in the order of 54% in reducing impacts resulting from the adoption of targets for composting. LCA proved to be effective for the evaluation of the environmental performance of MSWMS-Piedade. However, for future evaluations, the attributional approach should be replaced by the methodological practice of substitution to enable the avoided burdens to be considered in estimations of the environmental performance municipal solid waste management systems.

Life-cycle inventory for hydroelectric generation: a Brazilian case study

Representative Life-Cycle Inventories (LCIs) are essential for Life-Cycle Assessments (LCAs) quality and readiness. Because energy is such an important element of LCAs, appropriate LCIs on energy are crucial, and due to the prevalence of hydropower on Brazilian electricity mix, the frequently used LCIs are not representative of the Brazilian conditions. The present study developed a LCI of the Itaipu Hydropower Plant, the major hydropower plant in the world, responsible for producing 23.8% of Brazil's electricity consumption. Focused on the capital investments to construct and operate the dam, the LCI was designed to serve as a database for the LCAs of Brazilian hydroelectricity production. The life-cycle boundaries encompass the construction and operation of the dam, as well as the life-cycles of the most important material and energy consumptions (cement, steel, copper, diesel oil, lubricant oil), as well as construction site operation, emissions from reservoir flooding, material and workers transportation, and earthworks. As a result, besides the presented inventory, it was possible to determine the following processes, and respective environmental burdens as the most important life-cycle hotspots: reservoir filling (CO(2) and CH(4) emission: land use); steel life-cycle (water and energy consumption; CO, particulates, SO(x) and NO(x) emissions); cement life-cycle (water and energy consumption; CO(2) and particulate emissions); and operation of civil construction machines (diesel consumption; NO(x) emissions). Compared with another hydropower studies, the LCI showed magnitude adequacy, with better results than small hydropower, which reveals a scale economy for material and energy exchanges in the case of ltaipu Power Plant. (C) 2009 Elsevier Ltd. All rights reserved.

Comparative study of the life cycle assessment of particleboards made of residues from sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii)

This paper presents a research on the environmental impacts of particleboards produced from wastes, based on a comparative Life Cycle Assessment study. The particleboards were manufactured in laboratorial scale from the following residues: sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii). The study was developed following the methodological guidelines of ISO 14040. The functional unit adopted was the m2 of the particleboards produced and the impacts were evaluated by the Environmental Development of Industrial Products method. The results indicated that pine particleboard present the highest environmental impact potential. Our findings suggested that the factors that mostly aggravated the environmental impacts were: the distance between the raw materials and the production site, and formaldehyde emissions (FE). The first is related to the combustion of fossil fuel during the acquisition of raw material, which achieved the values of 2185.94 g/m2 for consumption of non-renewable resources for pine particleboard and 893.53 g/m2 for bagasse particleboard. The second is related to the use of urea-formaldehyde resin, responsible for the FE into the air during production. The FE is accountable for the contamination of approximately 7,800,000.00 m3 of air per m2 of particleboard produced, and was the factor with the greatest impact in human toxicity potential. © 2013 Elsevier Ltd. All rights reserved.

Curauá fibers in the automobile industry - a sustainability assessment

Replacing glass fibers with natural fibers in the automobile industry can yield economic, environmental and social benefits. This article evaluates the prospective environmental impacts of automobile applications of curauá fiber (Ananas erectifolius), which nearly equates the physical properties of glass fibers. The study identified economic and social advantages of applying curauá fiber composites in car parts. Besides costing 50% less than fiber glass, the use of curauá fibers can promote regional development in the Amazon region. In order to realize significant environmental benefits, however, the curauá-based composites would have to be lighter than their glass fiber-based counterparts. © 2006 Elsevier Ltd. All rights reserved.

Comparing environmental impacts of native and introduced freshwater prawn farming in Brazil and the influence of better effluent management using LCA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diferenças regionais do cultivo de café no Brasil

Brazil is one of the major coffee producers in the world, because of this, the goal of this study was to assess the regional differences of coffee cultivation for the reference crops 2001/2002 and 2002/03 by means of a life cycle assessment (LCA) in order to generate detailed production inventory data as well as quantify the potential environmental impacts of this crop. All information considered in this study (use of water, fossil based energy, fertilizers, pesticides and correctives) was taken from data collected from the producing farms. Four Brazilian coffee producer regions located at the Southeastern region were evaluated: Sul de Minas Gerais and Cerrado Mineiro in Minas Gerais State, and Mogiana and Alta Paulista regions in São Paulo State. The data refer to a production of 25.2 million kg of green coffee. Depending on the considered region, the production of 1,000 kg of green coffee requires, on average, approx. 9,300 to 13,000 kg of total energy, 70 to 130 kg of diesel, 6,500 to 12,700 kg of process water, 270 to 340 kg of fertilizers (NPK), 2.0 to 13.0 kg of pesticides, 230 to 600 kg of correctives, and yield around 1,600 to 1,900 kg/ha. Despite 20% of the coffee growers showing a good environmental performance, i.e. consumption of pesticides, fertilizers and correctives lower than the regional averages, this study has also identified some farms that can probably reduce the amount of some inputs and enhance their environmental performance.

Green teams: Understanding their roles in the environmental management of companies located in Brazil

Green teams are frequently considered in the state-of-the-art literature as an essential factor for companies aiming to implement and improve environmental management approaches and practices. However, most of the available literature on green teams is conceptual and theoretical by nature. Therefore, the main purpose of this article is to evaluate the main characteristics of green teams in Brazilian companies and to analyse the relationships between green teams and the maturity level of environmental management in those companies. Based on a conceptual background on corporate environmental management and green teams, a research was done in two complementary phases: a survey of 94 companies with ISO 14001 certification; and a multiple case study of four industrial companies. Survey results suggest that 82% of the studied companies have cross-functional green teams, i.e. involving various companies' departments; and 65% have functional green teams, i.e. individual department teams. The results of the case study suggest that the use of green teams is an instrument to the greening of companies with ISO 14001 in Brazil. The company with the most proactive and advanced environmental management is the same company which uses green teams more intensely. Green teams are especially necessary for implementing more technical environmental management practices, e.g. Life Cycle Assessment. Since this is one of the first studies analysing green teams, the results presented can be useful for companies and public policies aiming to implementation of environmental initiatives. © 2012 Elsevier Ltd. All rights reserved.

Análise dos impactos na construção civil: avaliação do ciclo de vida em chapas de partículas para forros

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Inventário do ciclo de vida do sistema de gerenciamento de resíduos sólidos urbanos do município de Piedade/SP e projeções de cenários para avaliação de impactos ambientais

Pós-graduação em Engenharia Civil e Ambiental - FEB

Sustentabilidade ambiental da criação de camarões de água doce e uso do aguapé no tratamento dos efluentes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de ciclo de vida comparativa dos processos de anodização e oxidação eletrolítica com plasma de liga de alumínio

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Avaliação do ciclo de vida dos tubos de PVC produzidos no Brasil

Naturally characterizes the human being the interference in the environment to ensure their survival and also convenience. After numerous environmental accidents caused by unbridled pursuit of this goal, the concern about providing for current needs without compromising the ability of the future generations to supply their own, gained space. In order to contribute to sustainable development the Life Cycle Assessment (LCA) was implemented. This tool is based on the concept that if the environmental impacts of a product or service are known, it is possible to take better decisions concerning its environmental aspects. The purpose of this research is to conduct the LCA of polyvinyl chloride (PVC), the world’s second most consumed thermoplastic. The methodology described in NBR ISO 14040 and NBR ISO 14044 was followed. As a result, the LCA of polyvinyl chloride produced in Brazil was obtained, and, therefore, the inventory of the product in question adapted to Brazilian reality. The research can be applied to various studies considering that actions were taken to ensure that it represents the Brazilian reality. Moreover, the procedures were described to guarantee the greatest transparency possible

Fluxo e tecnologias de informação no contexto brasileiro de inventário de ciclo de vida

Pós-graduação em Ciência da Informação - FFC

Importância da avaliação do ciclo de vida na análise de produtos: possíveis aplicações na construção civil

Much has been discussed lately about reusing waste in new construction materials and countless studies have been carried out based on this objective. However, before these products can be called “sustainable” and a recycling system can be effectively implemented, it is fundamental for all the aspects involved in this action to be understood, and more important, what are the true gains for the productive sector and what are the benefits for the environment if this was to occur. In order to obtain a general framework for all environmental aspects and potential impacts associated with these products, over their entire life cycle, the most appropriate methodology is the Life Cycle Assessment (LCA). In view of the above, the objective of this work is to provide an overview of current studies of LCA, its history, its importance, its standards and the methodology employed and its applications related to civil construction. It is expected, to obtain a more complete scenario of the influences from a study of LCA, as well as establishing a contribution for the assessment of specific products and processes for civil construction, disseminating the importance of the use of this tool within the sector.

Life cycle and behaviour of the predaceous mite Cunaxatricha tarsospinosa (Acari: Prostigmata: Cunaxidae)

Life cycle and behaviour of Cunaxatricha tarsospinosa Castro & Den Heyer from rubber trees in Brazil were studied, with Tenuipalpus heveae Baker offered as prey. The study was conducted at 25.4 +/- A 0.2A degrees C, 83 +/- A 5% RH and 12:12 h L:D photophase. The egg stage was the longest immature stage, lasting 17.1 +/- A 1.3 days (mean +/- A SE); total juvenile development was completed in 33.2 +/- A 2.8 days. Lifetime fecundity was 12.0 +/- A 2.2 eggs. Intrinsic rate of population increase was low, suggesting that T. heveae may not be a good prey for the predator. All specimens of C. tarsospinosa collected in the field for this study were females, no males were found. Concurrently, only females were obtained in the laboratory. This seems to be the first report of thelytokous parthenogenesis for cunaxids. Similar to earlier reports for some Cunaxinae and Coleoscirinae, prey were captured when predators were actively searching for them.