Misclassification probability as obese or lean in hypercaloric and normocaloric diet

The aim of the present study was to determine the classification error probabilities, as lean or obese, in hypercaloric diet-induced obesity, which depends on the variable used to characterize animal obesity. In addition, the misclassification probabilities in animals submitted to normocaloric diet were also evaluated. Male Wistar rats were randomly distributed into two groups: normal diet (ND; n=3 1; 3,5 Kcal/g) and hypercaloric diet (HD; n=31; 4,6 Kcal/g). The ND group received commercial Labina rat feed and HD animals a cycle of five hypercaloric diets for a 14-week period. The variables analysed were body weight, body composition, body weight to length ratio, Lee index, body mass index and misclassification probability A 5% significance level was used. The hypercaloric pellet-diet cycle promoted increase of body weight, carcass fat, body weight to length ratio and Lee index. The total misclassification probabilities ranged from 19.21 % to 40.91 %. In Conclusion, the results of this experiment show that rnisclassification probabilities Occur when dietary manipulation is used to promote obesity in animals. This misjudgement ranges from 19.49% to 40.52% in hypercaloric diet and 18.94% to 41.30% in normocaloric diet.

Dehydromonocrotaline inhibits mitochondrial complex 1. A potential mechanism accounting for hepatotoxicity of monocrotaline

Monocrotaline is a pyrrolizidine alkaloid present in plants of the Crotalaria species, which causes cytotoxicity and genotoxicity, including hepatotoxicity in animals and humans. It is metabolized by cytochrome P-450 in the liver to the alkylating agent dehydromonocrotaline. We evaluated the effects of monocrotaline and its metabolite on respiration, membrane potential and ATP levels in isolated rat liver mitochondria, and on respiratory chain complex I NADH oxidase activity in submitochondrial particles. Dehydromonocrotaline, but not the parent compound, showed a concentration-dependent inhibition of glutamate/malate-supported state 3 respiration (respiratory chain complex 1), but did not affect succinate-supported respiration (complex II). Only dehydromonocrotaline dissipated mitochondrial membrane potential, depleted ATP, and inhibited complex I NADH oxidase activity (IC50 = 62.06 mu M) through a non-competitive type of inhibition (K-I = 8.1 mu M). Therefore, dehydromonocrotaline is an inhibitor of the activity of respiratory chain complex I NADH oxidase, an action potentially accounting for the well-documented monocrotaline's hepatotoxicity to animals and humans. The mechanism probably involves change of the complex I conformation resulting from modification of cysteine thiol groups by the metabolite. (c) 2007 Elsevier Ltd. All rights reserved.

Comparing emergy accounting with well-known sustainability metrics: The case of Southern Cone Common Market, Mercosur

The quality and the power of human activities affect the external environment in different ways that can be measured and evaluated by means of several approaches and indicators. While the scientific community has been publishing several proposals for sustainable development indicators, there is still no consensus regarding the best approach to the use of these indicators and their reliability to measure sustainability. It is important, therefore, to question the effectiveness of sustainable development indicators in an effort to continue in the search for sustainability. This paper compares the results obtained with emergy accounting with five global Sustainability Metrics (SMs) proposed in the literature to verify if metrics are communicating coherent and similar information to guide decision makers towards sustainable development. Results obtained using emergy indices are discussed with the aid of emergy ternary diagrams. Metrics are confronted with emergy results, and the degree of variability among them is analyzed using a correlation matrix created for the Mercosur nations. The contrast of results clearly shows that metrics arrive at different interpretations about the sustainability of the nations studied, but also that some metrics may be grouped and used more prudently. Mercosur is presented as a case study to highlight and explain the discrepancies and similarities among Sustainability Metrics, and to expose the extent of emergy accounting. (C) 2010 Elsevier Ltd. All rights reserved.

Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing

The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected from 75 companies, were analyzed using structural equation modeling. The main results are as follows: (a) the model tested revealed an adequate goodness of fit, showing that overall, the relations proposed between EM and OP and between HR, LM and EM tend to be statistically valid; (b) EM tends to influence OP in a positive and statistically weak manner; (c) LM has a greater influence on EM when compared to the influence HR has over EM; (d) HR has a positive relationship over EM, but the statistical significance of this relationship is less than that of the other evaluated relationships. The originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved.

Lean and green? Evidências empíricas do setor automotivo brasileiro

The aim of this paper is to verify whether the practices of lean manufacturing are positively associated with the adoption of environmental management practices in Brazilian companies in the automotive sector to test the hypothesis that by being lean the business tends to become green. To this purpose, a framework associating these concepts with the research hypothesis was proposed. The data collected from 75 companies were analyzed using Structural Equation Modeling. The main results show that lean manufacturing (LM) is positively associated with environmental management (EM), but the explanation power of LM over EM is considered weak/moderate. In fact, being lean also means being green, but other organizational variables not considered in this study may influence the greening of organizations.

Integração dos programas de melhoria Lean Manufacturing e Six Sigma aplicados à logística de transporte de produtos de uma indústria metalúrgica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Support area as an indicator of environmental load: Comparison between Embodied Energy, Ecological Footprint, and Emergy Accounting methods

Environmental aspects have been acknowledged as an important issue in decision making at any field during the last two decades. There are several available methodologies able to assess the environmental burden, among which the Ecological Footprint has been widely used due to its easy-to-understand final indicator. However, its theoretical base has been target of some criticisms about the inadequate representation of the sustainability concept by its final indicator. In a parallel way, efforts have been made to use the theoretical strength of the Emergy Accounting to obtain an index similar to that supplied by the Ecological Footprint. Focusing on these aspects, this work assesses the support area (SA) index for Brazilian sugarcane and American corn crop through four different approaches: Embodied Energy Analysis (SA(EE)), Ecological Footprint (SA(EF)), Renewable Empower Density (SA(R)), and Emergy Net Primary Productivity (SA(NPP)). Results indicate that the load on environment varies accordingly to the methodology considered for its calculation, in which emergy approach showed the higher values. Focusing on crops comparison, the load by producing both crops are similar with an average of 0.04 ha obtained by SA(EE), 1.86 ha by SA(EF), 4.24 ha by SA(R), and 4.32 ha by SA(NPP). Discussion indicates that support area calculated using Emergy Accounting is more eligible to represent the load on the environment due to its global scale view. Nevertheless, each methodology has its contribution depending of the study objectives, but it is important to consider the real meaning and the scope of each one. (C) 2012 Elsevier Ltd. All rights reserved.

Emergetic ternary diagrams: five examples for application in environmental accounting for decision-making

In a recent paper, "A combined tool for environmental scientists and decision makers: ternary diagrams and emergy accounting." [Giannettti BF, Barrella FA, Almeida CMVB. A combined tool for environment scientists and decision makers: ternary diagrams and emergy accounting. J Clean Prod, in press http://dx.doi.org/10.1016/j.jclepro.2004.09.002] Ternary diagrams were proposed as a graphical tool to assist emergy analysis. The graphical representation of the emergy accounting data makes it possible to compare processes and systems with and without ecosystem services, to evaluate improvements and to follow the system performance over time. The graphic tool is versatile and adaptable to represent products, processes, systems, countries, and different periods of time.The use and the versatility of ternary diagrams for assisting in performing emergy analyses are illustrated by means of five examples taken from the literature, which are presented and discussed. It is shown that emergetic ternary diagram's properties assist the assessment of the system of the system efficiency, its dependance upon renewable and non-renewable inputs and the environmental support for dilution and abatement of process emissions. With the aid of ternary diagrams, details such as the interaction between systems and between systems and the environment are recognized and evaluated. Such a tool for graphical analysis allows a transparent presentation of the results and can serve as an interface between emergy scientists and decision makers, provided the meaning of each line in the diagram is carefully explained and understood. (c) 2005 Elsevier Ltd. All rights reserved.

Otimização do processo de MRP (Material Requirement Planning) de embalagens: uma aplicação da metodologia lean six sigma em uma indústria de agronegócios

There is a growing search for continuous improvement within the companies which creates an obligation of reducing and when it is possible eliminating waste. Production Planning and Control Department (PCP) is not out of this question, making necessary the application of methods and creation of tools that eliminate steps which do not add value to the planning process. This paper aims to develop a tool which concentrates in just one place all the necessary information to make the packaging material requirement planning (MRP) in a agribusiness company. Besides, it also aims, in a more visual way and using devices that prevent mistakes (Poka-Yoke), to reduce the number of reviews and mistakes made by analysts. As a result, an Excel spreadsheet was developed. This spreadsheet shows what happens with the status of planning and receiving of packaging, giving some advices when some critical situation happens. The use of Lean Manufacturing Method and the action research method helped to well define the problem and to reduce the number of steps, spreadsheets and time of process in 80%, 60% and 75%, respectively

Lean six sigma como estratégia para o aumento de eficiência em laminação de alumínio

This study aims to assess the implementation of Lean Six Sigma in the preparation of plates and hot lamination process for a company of aluminum rolled products, to improve the quality, productivity and process efficiency. As a basis for achieving these goals, the DMAIC methodology and various quality tools such as Cause Effect Diagram, Process Flow, SIPOC, Pareto, FMEA and Control Chart were used, trying to propose improvements to processes and increase their efficiency. The results were significant and were the basis for the continuation of a continuous improvement project throughout the factory

Lean Six sigma aplicado a uma empresa do setor de embalagens

With the advent of a global economy, Lean Six Sigma meets the demand of new production process that creates products within the customer’s specification without any wastage. The objectives of this work is to use the concepts Lean Manufacturing and Six Sigma parallel to minimize costs, increase the customer base, reduce the delivery time which implies an increase in the turnover of products on the shelves in a packaging company. We used the DMAIC method to continue working. The method DMAIC indicated the main failure modes that were fixed in the step improve. At this stage the tools of Lean Manufacturing gain tremendous value by optimizing processes with defects. The conclusion involves an increase in monthly billing, a corporate restructuring and, finally, a renewal in how to conduct the work of management

Aplicação do lean six sigma na linha de produção de turbinas industriais a vapor

This work evaluates the implementation of Lean Six Sigma into the Steam Turbine’s Blades Manufacturing Process, aiming to improve productivity, quality and operational efficiency. Therefore, several tools have been applied, such as VSM, Spaghetti Diagram, Ishikawa, Pareto, DMAIC, Benchmarking and Control Charts, seeking to propose process improvements, as well as Quality Indicators creation. It was obtained a significant waste reduction throughout the process, achieving a lead time reduction of 42% and 83,41% in transport. Also, were introduced the Lean Thinking concepts, such as pull production and Continuous material flow. At the same time, it was possible to calculate the process capability and the sigma level, evaluating and proposing some improvements

Ferramentas do Lean Manufacturing aplicadas em uma indústria de luminária

Due to globalization, is increasingly common for companies to make their products more competitive. With this background, the industries seek more efficient ways to produce. This paper aims to examine the tools of Lean Manufacturing applied in an industry luminaries ,addressing the positive aspects. Were applied tools like value stream mapping, Kanban, setup reduction and 5S program. With the application of these tools obtained improvements in processes, reducing lead time from factory and reducing the cost of the luminaries