Limestone and oyster shell for brown layers in their second egg production cycle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of different fat sources on the performance, egg quality, and lipid profile of egg yolks of commercial layers in the second laying cycle

This study was designed to evaluate the effects of different fat sources on the performance, egg quality, and lipid profile of the egg yolks of layers in their second production cycle. The fat sources were cottonseed oil, soybean oil, lard, sunflower oil, or canola oil. Experimental diets were fed to postmolt ISA Brown layers at 70 wk of age and the experimental period was 74 to 86 wk of age. The different fat sources did not influence performance or eggshell quality, but lipid profile of the egg yolk changed as a function of dietary fat sources. In general, the best changes, such as lower level of saturated fatty acids, higher levels of alpha-linolenic acid and DHA, and lower linoleic acid levels, were promoted by the addition of canola oil, but it did not promote enrichment of the eggs with polyunsaturated fatty acids.

Performance of layers submitted to different forced-molting methods and different temperatures

This study was carried out to evaluate the performance and egg quality of laying hens, in their second laying cycle submitted to different forced-molting methods and three environmental temperatures. Six hundred layers were distributed in a completely randomized experimental design with 15 treatments with five replicates of eight birds each, according to 5x3 factorial arrangement (molting methods vs. temperatures). The following forced-molting methods were applied: 90%, 70%, 50% dietary alfalfa inclusion, addition of 2,800 ppm zinc, and feed fasting. Temperatures were: 20 ºC, 27 ºC and 35 ºC. At the end of each period of the second laying cycle, bird performance and egg quality were evaluated. Data were submitted to analysis of variance and means were compared by orthogonal and polynomial contrasts. The highest alfalfa inclusion level (90% alfalfa and 10% basal diet) proved to be efficient as compared to the other methods, independently of temperature.

Modelling the effect of the physical and chemical characteristics of the materials used as casing layers on the production parameters of Agaricus bisporus

The aim of this research was to show the mathematical data obtained through the correlations found between the physical and chemical characteristics of casing layers and the final mushrooms' properties. For this purpose, 8 casing layers were used: soil, soil + peat moss, soil + black peat, soil + composted pine bark, soil + coconut fibre pith, soil + wood fibre, soil + composted vine shoots and, finally, the casing of La Rioja subjected to the ruffling practice. The conclusion that interplays in the fructification process with only the physical and chemical characteristics of casing are complicated was drawn. The mathematical data obtained in earliness could be explained in non-ruffled cultivation. The variability observed for the mushroom weight and the mushroom diameter variables could be explained in both ruffled and non-ruffled cultivations. Finally, the properties of the final quality of mushrooms were established by regression analysis.

Production of Agaricus blazei ss. Heinemann (A. brasiliensis) on different casing layers and environments

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biomimetic biosensor based on lipidic layers containing tyrosinase and lutetium bisphthalocyanine for the detection of antioxidants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinetics of interface state-limited hole injection in alpha-naphthylphenylbiphenyl diamine (alpha-NPD) thin layers

Injection-limited operation is identified in thin-film, alpha-NPD-based diodes. A detailed model for the impedance of the injection process is provided which considers the kinetics of filling/releasing of interface states as the key factor behind the injection mechanism. The injection model is able to simultaneously account for the steady-state, current-voltage (J-V) characteristics and impedance response. and is based on the sequential injection of holes mediated by energetically distributed surface states at the metal-organic interface. The model takes into account the vacuum level offset caused by the interface dipole, along with the partial shift of the interface level distribution with bias voltage. This approach connects the low-frequency (similar to 1 Hz) capacitance spectra, which exhibits a transition between positive to negative values, to the change in the occupancy of interface states with voltage. Simulations based on the model allow to derive the density of interface states effectively intervening in the carrier injection (similar to 5 x 10(12) cm(-2)), which exhibit a Gaussian-like distribution. A kinetically determined hole barrier is calculated at levels located similar to 0.4 eV below the contact work function. (C) 2008 Elsevier B.V. All rights reserved.

Impedance of carrier injection at the metal-organic interface mediated by surface states in electron-only tris(8-hydroxyquinoline) aluminium (Alq(3)) thin layers

Capacitance spectra of thin (< 200 nm) Alq(3) electron-only devices have been measured as a function of bias voltage. Capacitance spectra exhibit a flat response at high frequencies (> 10(3) Hz) and no feature related to the carrier transit time is observed. Toward low frequencies the spectra reach a maximum and develop a negative excess capacitance. Capacitance response along with current-voltage (J-V) characteristics are interpreted in terms of the injection of electrons mediated by surface states at the metal organic interface. A detailed model for the impedance of the injection process is provided that highlights the role of the filling/releasing kinetics of energetically distributed interface states. This approach connects the whole capacitance spectra to the occupancy of interface states, with no additional information about bulk trap levels. Simulations based on the model allow to derive the density of interface states effectively intervening in the carrier injection (similar to 1.5 x 10(12) cm (2)). (C) 2008 Elsevier B.V. All rights reserved.

Analysis of the accumulated energy by thermal stratification of liquid inside storage tanks with porous layers

A mathematical model was developed in order to study the behavior of thermal stratification of liquid in a typical storage tank with porous medium. The model employs a transient stream function-vorticity formulation to predict the development of stream function and temperature fields in a charging process. Parameters analyzed include Biot, Darcy, Reynolds and Richardson numbers, position, and the thickness of the porous medium. The results show the influence of these physical parameters that should be considered for a good design of storage tanks with thermal stratification.

Reversion to virulence evaluation of a 9R vaccine strain of Salmonella enterica serovar gallinarum in commercial brown layers

The live vaccine Cevac S. Gallinarum, made from a rough strain of Salmonella enterica subspecies enterica serotype Gallinarum is used for preventing fowl typhoid, a disease that still causes considerable economic losses in countries with a developing poultry industry. The objective of this paper was to evaluate a possible reversion to virulence of the strain used in a vaccine in commercial brown layers. Only Salmonella-free chicks were utilized. One hundred twenty (120) 12-day-old Dekalb brown layers divided in two trials were used. The first trial had six groups of 15 birds each. Birds of group 1 were vaccinated with 10 doses of Cevac S. Gallinarum subcutaneously and 10 doses orally, in a total of 20 doses of vaccine. Then the birds of groups 2, 3, 4, and 5 received inocula that contained feces and a pool of organs with fragments of liver, heart, spleen, and cecal tonsils obtained from the immediately previous group. The second trial had three groups with 10 birds each. Birds in group 7 received inocula containing a pool of organs from birds of group 5 from trial 1, whilst the birds in group 8 were vaccinated subcutaneously with one dose of vaccine. Both trials included negative control groups (6 and 9). Throughout the experimental period, birds were monitored for reactions to the vaccination on the site of administration, clinical signs, and post-mortem lesions. In each passage, in addition to the birds euthanized to provide the inocula material, two birds from each group were euthanized for assessment of possible lesions, and their organs (liver, heart, spleen and cecal tonsils) were cultured in an attempt to isolate the vaccine strain. Except for one bird from group 1, that had a local reaction on the site of vaccination - a small vesicle with less that 0.5 mm that persisted until the third day post vaccination -, no other bird had any local reaction to the vaccine or any visible clinical alteration. Birds in group 8 did not present any reaction or clinical alteration because of the vaccine. We only managed to re-isolate the vaccine strain in the inocula made from organs of birds in group 1. We confirmed the isolation by means of biochemical tests, serology, and acriflavine agglutination test. All other cultures made from organs or feces, from all the other experimental groups did not show any growth of the vaccine strain or any other Salmonella serovar, suggesting that the vaccinated birds did not shed the SG9R vaccine strain. No bird presented any clinical symptoms or died during the trials, and no gross lesions were observed in the post-mortem examinations. Under the controlled conditions and time-frame of the present experiment, it was possible to conclude that the rough 9R strain of Salmonella Gallinarum present in the vaccine Cevac S. Gallinarum (Ceva Campinas Ltda. - Campinas, SP - Brazil) did not revert to virulence.

Morphological changes of the intestinal mucosa of broilers and layers as affected by fasting before sample collection

The present study aimed at evaluating the histo-morphological changes resulting from different fasting periods before the collection of tissue samples in different segments of the small intestine (duodenum, jejunum and ileum) of 7-d-old male chicks of a broiler and a layer strain. A completely randomized experimental design in in a 2x7 factorial arrangement, being two strains with different growth rates (Ross 308 and HyLine® W36) and seven fasting periods (0, 2, 4, 6, 8, 10 and 12 hours ), with six replicates, totaling 84 birds. The comparison of the morphometrics of the duodenum, jejunum and ileum of broiler and layer chicks demonstrated faster digestive tract development in broilers relative to layers. The fasting period caused morphological changes in the liver and small and large intestines in both strains. Therefore, it must be highlighted that in studies involving organ weights and intestinal morphometrics, birds must not be submitted to fasting before tissue collection.

Effects of dietary trace mineral sources and levels fed to layers in their second laying cycle on the quality of eggs stored at different temperatures and for different periods

This study aimed at evaluating the effects of trace mineral levels and sources supplemented to diets fed to semi-heavy layers in their second laying cycle on the quality of eggs stored for 14 days at different temperatures. The experimental diets consisted of the inclusion of inorganic trace minerals (T1 - control: 100% ITM) and five supplementation levels of organic trace minerals (carboaminophopho chelates) (110, 100, 90, 80, and 70% OTM). Trace mineral inclusion levels (mg/kg feed) were: T1: control - 100% ITM: Zn (54), Fe (54), Mn (72), Cu (10), I (0.61) Se (0.3); T2 - 110% OTM: Zn (59.4), Fe (59.4), Mn (79.2), Cu (11.88), I (1.21) Se (0.59); T3 - 100%: OTM: Zn (54), Fe (54), Mn (72), Cu (10.8), I (1.10) Se (0.54); T4 - 90% OTM: Zn (48.6), Fe (48.6), Mn (64.8), Cu (9.72), I (0.99) Se (0.49); T5 - 80% OTM: Zn (43.2), Fe (43.2), Mn (57.6), Cu (8.64), I (0.88), Se (0.43); T6 - 70% OTM: Zn (37.8), Fe (37.8), Mn (50.4), Cu (7.56), I (0.77) Se (0.38). A completely randomized experimental design in a split-plot arrangement with 60 treatments of four replicates each was applied. The combination of six diets versus storage temperature (room or under refrigeration) was randomized in plots, whereas the sub-plots consisted of storage times (0, 3, 7, 10, and 14 days). Data were submitted to analysis of variance of a model in slip-plots in time using the software package SAS (2000) at 5% probability level. It was concluded that 70% OTM supplementation can be used with no damage to egg quality, independently from storage temperature or time. The quality of refrigerated eggs stored up to 14 days is better than those stored at room temperature.

Effect of organic mineral supplementation on the egg quality of semi-heavy layers in their second cycle of lay

This study was carried out to evaluate the effects of dietary trace mineral levels and sources on egg quality parameters of second-cycle semi-heavy layers. A number of 360 72-week-old layers were submitted to forced molting. Upon return of lay (83 weeks of age), birds were distributed according to a completely randomized experimental design of six treatments with six replicates of 10 birds each. The control treatment consisted of 0.10% dietary supplementation of trace minerals from inorganic sources, which was proportionally replaced by five levels (110, 100, 90, 80, 70%) of an organic trace mineral supplement containing 30, 30, 40, 6, 0.61, and 0.3 g/kg product of Zn, Fe, Mn, Cu, I, and Se, respectively. All diets contained equal protein, energy, and amino acid levels. Every 28 days of the experimental period (112 days) four eggs per replicate were collected for egg quality evaluation. The following parameters were evaluated: specific gravity, yolk, albumen and eggshell percentages, yolk index, Haugh units, and eggshell thickness and breaking strength. One sample per replicate, consisting of the pool of the yolks of three eggs collected at the end of each experimental period, was used to assess protein and mineral (Ca, P, Cu, Fe, Mn, and Zn) contents. The results were submitted to ANOVA, and means to the test of Tukey at 5% significance level. The evaluated trace mineral levels and sources did not influence any of the studied egg quality parameters. It was concluded that reducing organic trace mineral supplementation in up to 70% relative to 100% inorganic trace mineral supplementation does not affect egg parameters and therefore, can be applied to the diet of semi-heavy layers in their second cycle of lay.

Calcium levels and limestone particle size in the diet of commercial layers at the end of the first production cycle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of the calcium level and limestone particle size on the performance of semi-heavy layers in the second cycle of egg production

An experiment was carried out at the Research and Development Unit of Brotas aiming at evaluating dietary calcium level and limestone particle size on the production performance of commercial (Hy-Line Brown) layers in the second lay cycle. Experiment duration was 112 days. A total number of 288 hens, with 83 weeks of age in the beginning of the experiment, were used in a completely randomized experimental design in a factorial arrangement of 2x3, with two calcium levels (3.5 and 4.0%) and three limestone particle size compositions: 100% fine limestone (FL), 30% coarse limestone (CL) + 70% fine limestone (FL), and 50% (CL) + 50% (FL), with six replicates of eight birds each. Egg weight (g), egg production (%), egg mass (%), feed intake (g), feed conversion ratio (kg/dz and kg/kg), mortality (%), and egg loss (%) were evaluated. The analysis of variance did not detect significant differences (p>0.05) among treatments on any of the evaluated performance parameters. It was concluded that the tested calcium levels and limestone particle composition did not influence the performance of semi-heavy layers in second production cycle.