203 resultados para Itapira (SP)
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
The objects of this study are three manganese ore deposits and one mine derived from lateritic weathering of gondites (spessartine quartzites). These deposits are associated with Mn-rich garnet metasediments of the Itapira Group (Paleoproterozoic) and the reserves were estimated at approximately 2.0 × 10 6 tons with an average grade of 23% MnO 2. The ore minerals are cryptomelane, pyrolusite, lithiophorite, spessartine and psilomelane. Several crystal shapes and textural characteristics were identifi ed in this study, which are related to the degree of liberation, as confi rmed by heavy media separation method. In this study, we determined the main characteristics of the liberation of manganese, which is concentrated in the fi ne grain-size fraction and is lost during ore dressing. Therefore, the low average content of MnO 2 (28%) is due to this loss, whereas at grain size of minus 0.074 mm, contents near 40% MnO 2 were observed. This suggests that the ore can be used for manufacturing manganese sulphate fertilizers. A comparative study with the ore deposits located at Ouro Fino (MG), mainly with the Caneleiras mine, showed that higher degree of liberation occurs in the coarse grain-size fractions (0.84 to 0.074 mm with MnO 2 content of 38%). As a consequence, the ore can be used for manufacturing Fe-Si-Mn alloys.
Resumo:
The mining research is a complex activity, which should preferably involve the combination of direct and indirect techniques of geological research. The increasing demand for base metals in domestic and international markets provide the revaluation of mineral occurrences, which can be converted into deposits and mines. This paper presents the results of the application of geophysical methods of electric resistivity and induced polarization in main foliation parallel to the arrangement of the area, in a deposit of oxides and hydroxides in massive and disseminated ores, docked in gneisses and quartzites, located in the municipality of Itapira, in the North of the State of São Paulo in Brazil. Inversion models indicate the predominance of high cargabilidade that partially coincide with low resistivity values. Integration of geophysical data made possible the drafting of sections of electric walking with cross-checking distance x depth, for detailing your target. The integrated analysis of geophysical and geological structural data leads to the conclusion that the primary mining suffers structural control with the regional foliation in ores
Resumo:
The geophysical methods are used as tools that, together with other data, assist in target detail and sizing of ore bodies. This paper presents the results of the application of DC resistivity geophysical method on a manganese mineral occurrence located in Itapira, in the northern portion of São Paulo state, hosted predominantly in schists and quartzits of Itapira Group. The integration of geophysical data resulted in the elaboration of electrical resistivity models, where it was possible observe that the mineralized body, composed predominantly of manganese oxides and hydroxides, has a pattern of high resistivity (above 5000 Ω.m) both surface and subsurface. The contrast with the host rock is characterized mainly by different minerals assemblages and by the presence of local groundwater. The results accomplished in this paper reveal that the application of DC resistivity method is valid in primary evaluations of supergene deposits
Resumo:
The mineral sector is of utmost importance for Brazilian economic growth, an area which depends on basic geological research to enlarge known deposits and in process of mining, besides discovering new occurrences and mineral deposits. This set of activities is named mineral research, which planning involves economy concepts, market demands and use of methods and techniques for geological evaluation, direct and indirect. This paper aim at performing geophysical detailing on occurrences of supergenic manganese located in the northwest portion of the State of São Paulo, Itapira, for spatial dimensioning of mineral targets, besides the attempt to correlate among the content on physical parameter measured by geophysics. The lack of scientific publications by Brazilian researchers in this theme, availability of previous studies for the selected targets, commercial importance of the mineral goods for the Brazilian Trade Balance, justify the performance of the present research project
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Geologia Regional - IGCE
Adição experimental de novos materiais às argilas da região do polo cerâmico de Santa Gertrudes (SP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A redução das emissões de gases de efeito estufa representa um grande desafio tecnológico aos modelos industriais vigentes. Mecanismos de Desenvolvimento Limpo (MDL) e sequestro de CO2 fundamentam grande parte dos planos de crescimento sustentáveis, com vistas à obtenção de níveis mais seguros de CO2. Pesquisas promissoras consideram a técnica de sequestro de CO2, por meio da carbonatação mineral, em que silicatos ricos em magnésio, cálcio, ferro e manganês são transformados em carbonatos. Este trabalho teve por objetivo caracterizar, em caráter preliminar e exploratório, as rochas metamáficas e metaultramáficas dos Complexos Amparo e Itapira, com vistas à avaliação de seu potencial mineral para uso em processos de carbonatação mineral no sequestro de CO2; essas rochas constituem terrenos metamórficos de grau médio a alto, localizadas na região de Itapira, Amparo, Serra Negra e Lindóia (SP). As rochas metamáficas reúnem anfibolitos, actinolita xistos e hornblenditos, e encontram-se na forma de lentes ou camadas estiradas em intercalação com rochas supracrustais. As rochas metaultramáficas ocorrem em corpos pequenos e descontínuos, com composição mineralógica em geral rica em olivina, piroxênio e anfibólio. As rochas avaliadas no presente estudo apresentam potencial para carbonatação mineral, em particular aquelas com teores elevados de magnésio. Dessa forma, podem representar importante prospecto de avaliação de jazidas para utilização em processos de carbonatação mineral.
Resumo:
A caracterização anatômica, física, mecânica e química da madeira fornece informações importantes para sua melhor utilização. Contudo, para que madeiras se tornem boa opção para o mercado de pisos, adicionalmente é necessária a realização de ensaios que simulem suas reais condições em serviço. Esses ensaios simulam o pisoteio executado pelos sapatos de salto com pequenas áreas de pressão, o arraste e a queda de objetos, a resistência à abrasão da superfície e o atrito oferecido durante o deslocamento de pessoas que caminham sobre ele. Grande dificuldade da seleção de novas madeiras para pisos está na ausência de valores de referência físico-mecânicos. O presente trabalho visou a caracterizar as madeiras de Eucalyptus clöeziana F. Muell, de Eucalyptus microcorys F. Muell e de Corymbia maculata Hook, para as propriedades de densidade básica, retratibilidade, aplicação de carga rolante, de atrito estático e dinâmico, endentação causada por cargas aplicadas em pequenas áreas, impacto da esfera de aço cadente e resistência à abrasão. Foi observado que as madeiras estudadas podem ser utilizadas para a confecção de pisos, de acordo com seus resultados obtidos e por meio de comparações com resultados de literatura.
Resumo:
The Vale do Ribeira, SP, main agricultural activity is the banana crop, which accounts for most of this fruit production in the State of São Paulo. The nutritional balance of the plant is one of the most important factors for the banana plant can complete the cycle and achieve high productivity. Aiming to evaluate the seasonal variation of leaf nutrient concentration in banana plants in Vale do Ribeira-SP, we used the results of 252 chemical analyses of plant tissue, collected from August 2009 to September 2010, in the 18 representative properties for the region, ten cultivated with subgroup Cavendish banana plant and eight of subgroup Prata banana plant. The largest variation between the macronutrient occurred for K and S, and among the micronutrients, especially for Fe and B. In some dates of evaluation, there was a higher leaf concentration of P, K, Ca and Zn, in subgroup Cavendish banana plants, while the subgroup Prata banana plants showed higher leaf concentration, especially of Mn, B and N. Climatic conditions, especially rain, influenced the leaf nutrient content, especially for K, N, S, B and Fe.
Resumo:
Agricultural activity has direct consequences on the soil and water quality. Thus, assessing environmental impacts of this vital economic activity, through soil attribute analysis, is essential to the proposal of alternatives. The aim of this study was to analyze soil quality under different land management practices, conventional and organic. The study was carried out in a watershed of the Ibiuna municipality, SP, Brazil, an important supplier of agricultural products for the São Paulo metropolitan area. A hundred samples were collected, 20 in each type of land use: reforested areas, native vegetation, pasture, conventional cultivation and organic cultivation. The soil resistance to penetration, its pH (in water and KO), electrical conductivity, bulk density, particle density, porosity, soil color, soil texture and the percentages of carbon and nitrogen were analyzed. The data were statistically analyzed, searching for significant differences. The results of soil analysis showed great similarity between the organic and conventional culture, with no statistical differences. However, organic cultivation showed greater similarity to the soil of native vegetation in the percentage of carbon and nitrogen in soils compared to conventional culture. Thus, the discussion begins on a topic very little explored so far, and the results obtained should be further studied.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
A total of 2629 individuals of Arenaeus cribrarius (1293 males and 1336 females) were captured in Ubatuba (SP), from August 1996 to July 1997. Individuals were distributed in 5 mm size class carapace width (CW), to verify sex-specific growth-age equations. The Von Bertalanffy model was chosen to determine the growth rate and expressed by CW=120.52[1-e(-1.80t)] for males and CW=100.81[1-e(-1.60t)] for females. The age estimated for the first juvenile stage (t(o)) was 6.1 and 8.3 days for males and females, respectively. The maximum age determined was 1.8 years for males and 2 years for females, which correspond to a maximum size of 115.8 and 96.7 mm, respectively. The maximum size (CWmax) estimated using 95% of asymptotic size was 114.5 mm for males and 95.8 mm for females. Males have a precocious sexual maturity (5 months) when compared to females (6.8 months). The growth rate and size of A. cribrarius are higher than other portunid species, with great interest for aquaculture.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The crustaceans activity of move about could alter in function of the environmental conditions. In the present study, this activity of the hermit crab Clibanarius vittatus was studied in dry and submerged areas of the intertidal region of Pescadores Beach in Sao Vicente (SP), Brazil. In both areas 110 animals (86 of dry and 24 of submerged area) were analyzed and C. vittatus show more activity in the submerged area than in the dry one. The low activity of locomotion presented when exposed to the air, can be due by the stress caused in function of the high temperature and desiccation.