Desempenho do irrigâmetro no manejo da água de irrigação na cultura do feijoeiro

In this work, the aim was to evaluate the performance of Irrigameter in the management of the irrigation water, led in the culture of the bean plant, comparatively to the use of the methods standard of stove, tensiometers, Bouyoucos, automatic meteorological station and pan Class A. Irrigameter was adjusted to the soil characteristics, culture of the bean and irrigation equipment to confection the management ruler. For direct estimation of the evapotranspiration of the culture of the bean plant in your development stadiums, Irrigameter operated inside with heights of the levels of water of the evaporatorio same to 2, 3 and 5 cm, corresponding to the stadiums of initial development, vegetative development and flowering, respectively. The humidity obtained by the standard method of stove it was adopted as reference in the comparisons of the irrigation depth. Irrigameter can be used in the management of the irrigation to determine the consumption of water directly for a culture, in any development stadium; the methods that estimate the evapotranspiration of the culture overestimated the irrigation depth recommended by the standard method of stove, happening behavior contrary with the ones that determines the current humidity of the soil.

Avaliação hidráulica e de resistência a tração de dois modelos de mangueiras gotejadoras

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Análise técnica e econômica da propagação e produção inicial do mamoeiro (carica papaya L.)

Pós-graduação em Agronomia - FEIS

Perda de carga em mangueiras gotejadoras novas, usadas e com emissores entupidos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de poliacrilamida na redução da perda de carga em tubulação de polietileno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fertirrigation for vegetables grown in greenhouses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Território usado e recursos hídricos: o uso da água na produção de flores e plantas ornamentais em Holambra-SP

Pós-graduação em Geografia - IGCE

Investment recovery period in electric motor of higher efficiency in pumping for irrigation

Neste trabalho, ajustou-se um modelo matemático para quantificar o efeito do rendimento do motor elétrico sobre os custos de um sistema de bombeamento para irrigação na estrutura tarifária de energia elétrica convencional e horo-sazonal verde, bem como calcular o tempo de recuperação do capital investido no equipamento de maior rendimento. em seguida, o mesmo foi aplicado a um sistema de irrigação tipo pivô central em duas opções de rendimento do motor elétrico: 92,6% (linha padrão) e 94,3% (linha alto rendimento), sendo que o custo de aquisição do primeiro correspondeu a 70% do segundo. A potência do motor elétrico era de 100 cv. Os resultados mostraram que o modelo permitiu avaliar se um motor de alto rendimento era viável economicamente em relação ao motor-padrão em cada estrutura tarifária. Nas duas estruturas tarifárias, o motor de alto rendimento não foi viável. Na tarifa horo-sazonal verde, somente seria viável se seu rendimento fosse 4,46% superior ao do motor-padrão. Na tarifa convencional, somente seria viável se o ganho de rendimento superasse 2,71%.

Scanning electron microscopy analysis of RinsEndo system and conventional irrigation for debris removal

A new device for irrigation, which presents hydrodynamic activation based on the pressure-suction technology, has recently been introduced to the market: the Rinsendo system. This study compared the efficacy of the Rinsendo system and conventional (manualdynamic) irrigation in the removal of debris from the root canal walls, using scanning electron microscopy (SEM). Twenty mandibular premolars with completely formed roots were selected and randomly divided into group 1 (irrigation with the Rinsendo system) and group 2 (conventional irrigation). The canals were irrigated with 1 ml of saline at each change of instrument. instrumentation started with a #15 K file and continued up to a #40 K file, which was standardized as the working length instrument. Then, the teeth were sectioned in buccolingual direction and the halves were sputter-coated with gold and examined by SEM. The apical, middle and cervical root canal thirds were evaluated, and the results were analyzed statistically by the Mann-Whitney test for comparison between methods, Kruskal-Wallis test for comparison among thirds, and Miller test for individual comparisons. A significance level of 5% was set for all analyses. The results did not show significant differences (p>0.05) between methods at each third and among thirds for each technique analyzed individually. in conclusion, there was no difference in the cleaning ability of the Rinsendo system and conventional irrigation.

Relationship between citrus productivity and indicators of uniformity in trickle irrigation system

In trickle irrigation systems, the design is based on the pre-established emission uniformity (EU) which is the combined result of the equipment characteristics and its hydraulic configuration. However, this desired value of the EU may not be confirmed by the final project (in field conditions) and neither by the yield uniformity. The hypotheses of this research were: a) the EU of a trickle irrigation system at field conditions is equal to the emission uniformity pre-established in the its design; b) EU has always the lowest value when compared with other indicators of uniformity; c) the discharge variation coefficient (VC) is not equal to production variation coefficient in the operational unit; d) the difference between the discharge variation coefficient and the productivity variation coefficient depends on the water depth applied. This study aimed to evaluate the relationship between EU used in the irrigation system design and the final yield uniformity. The uniformity indicators evaluated were: EU, distribution uniformity (UD) and the index proposed by Barragan & Wu (2005). They were compared estimating the performance of a trickle irrigation system applied in a citrus orchard with dimensions of 400m x 600m. The design of the irrigation system was optimized by a Linear Programming model. The tree rows were leveled in the larger direction and the spacing adopted in the orchard was 7m x 4m. The manifold line was always operating on a slope condition. The sensitivity analysis involved different slopes, 0, 3, 6, 9 and 12%, and different values of emission uniformity, 60, 70, 75, 80, 85, 90 and 94%. The citrus yield uniformity was evaluated by the variation coefficient. The emission uniformity (EU) after design differed from the EU pre-established, more sharply in the initial values lower than 90%. Comparing the uniformity indexes, the EU always generated lower values when compared with the UD and with the index proposed by Barragan. The emitter variation coefficient was always lower than the productivity variation coefficient. To obtain uniformity of production, it is necessary to consider the irrigation system uniformity and mainly the water depth to be applied.

Influence of irrigation on wheat crop

O uso da irrigação na triticultura tem aumentado significativamente nos últimos anos no Brasil. Neste trabalho, objetivou-se avaliar a influência da irrigação na produtividade, na qualidade tecnológica da farinha e no sistema radicular do trigo. em experimento de campo no IAPAR, em Londrina, Paraná, a cultivar IPR 118 foi cultivada sob irrigação por aspersão convencional (Tratamento Irrigado) e sem irrigação (Tratamento Sequeiro). A produtividade foi determinada, colhendo-se três amostras de 25 m² por tratamento. Nestas mesmas amostras, procedeu-se à análise da qualidade tecnológica da farinha, sendo avaliada, entre outros parâmetros, a força de glúten (W). A avaliação do sistema radicular foi realizada após a colheita, no perfil de 0 a 45 cm de profundidade do solo, amostrando-se oito plantas em cada tratamento. O método da parede do perfil foi utilizado para determinar o número de raízes (NR) e o método do monólito para determinar a massa seca de raízes (MSR). A irrigação aumentou em três vezes a produtividade do trigo, porém diminuiu o W na farinha. Ainda assim, o valor de W encontrado no Tratamento Irrigado (249 10-4 J) foi suficiente para manter a classificação do trigo como tipo-pão, a mesma para o qual a cultivar IPR 118 é classificada. Os valores medidos de NR e a MSR foram iguais ou maiores no Tratamento Sequeiro.

Perfil radial e uniformidade de precipitação do aspersor NaanDanJain 427, em função da regulagem do defletor

The study aimed to evaluate the radial profile and the uniformity of water distribution of sprinkler manufactured by the company NaanDanJain, model 427 1/2 '' M and nozzle with 2.8 mm of internal diameter, operating at pressures of 150, 200, 300 and 400 kPa and five positions of the deflector (0, 20, 50, 80 and 100%). For the determination of the parameters evaluated, the grid method was used and with the help of computer application CATCH 3D, overlapping layers of water depths was calculated with ten spacing. The results show that the deflector adjustment influences the radius of wetness and the distribution profile while the uniformity of water application showed as an important mechanism, since it permits different behavior for the sprinkler, ensuring wide track of utilization of the equipment.

Eficiência de um hidrociclone de geometria rietema para pré-filtragem de água para irrigação

O hidrociclone é um equipamento amplamente utilizado pela indústria em processos envolvendo separação sólido-líquido, porém ainda pouco utilizado na agricultura irrigada no Brasil. Neste trabalho, avaliou-se o desempenho deste equipamento como pré-filtrante de partículas sólidas, oriundas dos processos erosivos e do assoreamento dos recursos hídricos. Os testes foram realizados com um hidrociclone de geometria Rietema, possuindo diâmetro de 19,2 cm na parte cilíndrica, operando com vazões variando entre 10 m³ h-1 e 27 m³ h-1. Os materiais particulados usados em suspensão foram: solo franco-argiloso e areia de rio. Os resultados mostraram que a perda de carga máxima média foi de 52 kPa e 47 kPa para as suspensões aquosas de areia e solo, respectivamente. Seu melhor desempenho ocorreu operando com suspensão aquosa de areia, apresentando eficiência total de 92,3% para a vazão de 26,9 m³ h-1. Concluiu-se que o equipamento avaliado é mais eficiente para remoção de partículas de areia, podendo ser utilizado como pré-filtro em sistemas de irrigação.

Measurement systems of soil water matric potential and evaluation of soil moisture under different irrigation depths

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seedlings production of Tabebuia heptaphylla in different substrates and levels of irrigation, in greenhouse conditions

The objective of this research was to evaluate the growth of Tabebuia heptaphylla seedlings in distinct substrates with different amounts of urban waste compost and the relation between this growth and irrigation. A completely randomized experimental design was used, with a factorial arrangement of 15 substrates and 2 irrigation levels. The substrates were composed by the combination of different materials: urban waste, tanned cattle manure, vermiculite, soil and the commercial form Plantmax (R). For the study of the seedlings development, the following characteristics were evaluated: plant height, stem diameter at soil level, number of leaves, above ground dry matter, root system dry matter, relation between plant height and stem base diameter, Dickson quality index and relation between plant height and above ground dry matter. Evaluations of plant height, stem diameter at soil level and number of leaves were made at 75, 90, 105, 120, 135 and 150 days after sowing. According to the results, it was concluded that urban waste compost does not increase plant development. Significant differences in relation to the irrigation levels were found, with better results for the 150% irrigation level compared to 100% evapotranspiration.