Effect of the insecticides abamectin and lufenuron on eggs and larvae of Chrysoperla externa under laboratory conditions

The side effects of two insecticides/acaricides, abamectin and lufenuron, on the eggs and larvae of Chrysoperla externa (Hagen) were studied in the laboratory (25 +/- 2degreesC, 62 +/- 10% RH and 12-h photophase). The analytical methods used were those proposed by the International Organization for Biological Control (IOBC)-Working Group for 'Pesticides and Beneficial Organisms'. Chrysoperla externa egg viability was not affected by abamectin. Neonate larvae from abamectin sprayed eggs as well as first, second and third instar larvae that were directly treated, developed normally and yielded normal adults. Lufenuron presented no adverse effects on egg survival. However, lufenuron induced high mortality in neonate larvae from treated eggs. These neonates, as well as lufenuron treated first and second instar larvae could not molt. In the third instar, high pupal mortality occurred. The results showed that abamectin is innocuous and that lufenurom is toxic to Chrysoperla externa eggs and larvae.

Seletividade Fisiológica de Endossulfam e Deltametrina às Operárias de A. chartifex spiriti For. (Hymenoptera: Formicidae) em Agroecossistema Cacaueiro do Sudeste da Bahia

Avaliou-se o efeito dos inseticidas endossulfam e deltametrina sobre a formiga predadora Azteca chartifex spiriti For., em cultivo do cacaueiro no Sudeste da Bahia, conforme padronização da International Organization for Biological and Integrated Control (IOBC), West Palaearctic Regional Section (WPRS), com algumas modificações. Os testes foram: a) contato; b) pulverização direta; c) persistência. Nos testes de contato, operárias foram expostas a um filme fresco e seco dos inseticidas, aplicado sobre cristalizadores. Nos testes de aspersão, as formigas foram diretamente pulverizadas com os agroquímicos às concentrações recomendadas para o controle de tripes e percevejos. Os insetos foram mantidos a 25±2°C, 65±10% UR e fotofase de 12h. A sobrevivência foi avaliada após 24h e a intervalos variáveis de tempo. Nos testes de persistência, as operárias foram confinadas em cristalizadores e expostas ao contato com folhas de cacaueiro tratadas previamente no campo, sob as mesmas condições controladas. Desenvolveram-se experimentos a um, três, seis, 10, 18 e 32 dias após a aplicação (DAA). Deltametrina foi considerado seletivo nos testes de contato e pulverização direta, não sendo necessária a condução dos testes de persistência em folhas para este inseticida. Endossulfam foi altamente tóxico nos testes de contato e pulverização direta, entretanto, apresentou-se levemente persistente no terceiro teste. A análise conjunta dos três tipos de testes sugere que ambos os inseticidas são seletivos para a espécie benéfica, podendo ser recomendadosem Programas de MIP em agroecossistema cacaueiro. A metodologia proposta pela IOBC/WPRS possibilita estabilidade dos resultados, permitindo sua adaptação e utilização para o fim proposto.

Ergonomics work analysis applied to dentistry - a Brazilian case study

This paper presents the Ergonomic Work Analysis method in a Brazilian Dentist's office. Through the study, the constraints and the strategies in avoiding them were identified. It was found that dentists hardly use the position most indicated by the International Organization for Standardization (ISO) and the Federation Dentaire Internacionale (FDI) for both the patient and the dentist, which is respectively supine and 9 o'clock, due to the limited space and layout. Five types of treatments performed by the professional have been studied. The frequency and duration of actions in these treatments were accounted for and the standard positions adopted were identified. The AET was found to be a very suitable method to grasp the dentist's activity and build a point of view of the profession, which is characterized as: stressful, perfectionist and restrictive. Time management is presented as an important strategy to control the tension arising from performing the treatments.

Evaluation of the radiopacity of calcium hydroxide- and glass-ionomer-based root canal sealers

Aim To evaluate the radiopacity of calcium hydroxide-based root canal sealers (Acroseal, Sealapex and Sealer 26), a glass-ionomer-based sealer (Activ GP Sealer) and a zinc oxide and eugenol-based sealer (Intrafill).Methodology Five disc-shaped specimens (10 x 1 mm) were fabricated from each material, according to the International Organization for Standardization (ISO) 6876/2001 standard. After setting of the materials, radiographs were taken using occlusal films and a graduated aluminum step-wedge varying from 2 to 16 mm in thickness. The dental X-ray unit (GE1000) was set at 50 Kvp, 10 mA, 18 pulses s(-1) and distance of 33.5 cm. The radiographs were digitized and the radiopacity compared with that of the aluminum step-wedge, using WIXWIN-2000 software (Gendex). Data (mm Al) were submitted to ANOVA and Tukey test.Results Intrafill was the most radiopaque material (7.67 mm Al) followed by Sealer 26 (6.33 mm Al), Sealapex (6.05 mm Al) and Acroseal (4.03 mm Al). Activ GP was the least radiopaque material (1.95 mm Al, P < 0.05).Conclusions The sealers evaluated in this study had different radiopacities. However, except for the glass-ionomer-based sealer, all materials had radiopacity values above the minimum recommended by the ISO standard.

Radiopacity evaluation of new root canal filling materials by digitalization of images

The aim of this study was to evaluate the radiopacity of five root canal filling materials (AH Plus, Intrafill, Roeko Seal, Epiphany, and EndoRez). Following the International Organization of Standardization 687612001, five circular specimens (10 X 1 mm) were made from each material. After the material set, radiographs were made using occlusal film and a graduated aluminum step-wedge varying in thickness from 2 to 16 mm. The dental X-ray unit (GE1000) was set at 50 Kvp, 10 mA, 18 pulses/second, and distance of 33.5 cm. The radiographs were digitized, and the radiopacity was compared with the aluminum step-wedge, using WIXWIN-2000 software (Gendex). Data (mm Al) were analyzed using ANOVA and Tukey tests. AH Plus and Epiphany were the most radiopaque materials (9.8 and 8.8 mm Al, respectively), followed by EndoRez (7.2 mm Al). Roeko Seal and Intrafill presented the lowest radiopacity values (5.7 and 6.1 mm Al, respectively). Although the materials evaluated demonstrated different radiopacities, all had values above the minimum recommended by the international Organization of Standardization.

Radiographic effect of different radiopacifiers on a potential retrograde filling material

Objective. The objective of this study was to evaluate the radiopacity of white Portland cement (PC) associated with bismuth oxide (Bi(2)O(3)), barium sulfate (BaSO(4)), iodoform (CHI(3)), and zirconium oxide (ZrO(2)). White mineral trioxide aggregate (WMTA) and PC without radiopacifier were used as positive and negative controls, respectively.Study design. Following International Organization for Standardization (ISO) 6876/2001, 5 circular specimens (10 x 1 mm) were made from each material. After the materials set, radiographs were taken using occlusal film and a graduated aluminum step-wedge varying in thickness from 2 to 16 mm. The dental X-ray unit (GE1000) was set at 50 Kvp, 10 mA, 18 pulses/s, and distance of 33.5 cm. The radiographs were digitized, and radiopacity was compared with the aluminum step-wedge, using Wixwin-2000 software (Gendex). Data (mm Al) were analyzed using analysis of variance and Tukey tests.Results. The PC + Bi(2)O(3) and WMTA samples presented greater radiopacity (5.88 and 5.72 mm Al, respectively), followed by PC + ZrO(2) (3.87 mm Al) and PC + CHI(3) (3.50 mm Al). The PC + BaSO(4) and PC samples presented the lowest radiopacity values (2.35 and 1.69 mm Al, respectively), which were below the minimum value recommended by the ISO.Conclusion. Analysis of the present results led to the conclusion that all of the materials tested presented acceptable radiopacity, except PC + BaSO(4) and pure PC. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009; 108: 628-632)

Seletividade de produtos fitossanitários sobre o ácaro predador Agistemus brasiliensis Matioli, Ueckermann & Oliveira (Acari: Stigmaeidae)

Os ácaros predadores das famílias Phytoseiidae e Stigmaeidae constituem-se nos principais inimigos naturais de Brevipalpus phoenicis (Geijskes) em citros. Este ácaro-praga causa sérios prejuízos na produção, devido à transmissão do vírus da leprose dos citros (CiLV). Apesar do grande volume de informações sobre a sensibilidade de ácaros Phytoseiidae a agrotóxicos, praticamente não existem informações sobre o efeito desses compostos em ácaros Stigmaeidae no Brasil. Sendo assim, o trabalho teve por objetivo avaliar o efeito dos principais agrotóxicos utilizados em citros sobre o ácaro predador Agistemus brasiliensis Matioli, Ueckermann & Oliveira (Acari: Stigmaeidae), em condições de laboratório. Arenas de folhas de citros da variedade Pera, contendo 25 fêmeas adultas de A. brasiliensis, foram pulverizadas em torre de Potter. Avaliaram-se as mortalidades dos ácaros 72 horas após a aplicação. O efeito dos produtos na reprodução do acarino e a viabilidade dos ovos também foram avaliados. Quanto à seletividade, conforme proposta da Organização Internacional para o Controle Biológico (IOBC), os produtos foram classificados como: classe 1 - inócuo (E<30%), acrinathrin, bifenthrin, carbosulfan, deltamethrin; 2 - levemente nocivo (30%99%), calda sulfocálcica, cyhexatin, flufenoxuron, hexythiazox, óxido de fenbutatin, propargite, pyridaben e spirodiclofen. Estudos conduzidos em condições de campo ainda são necessários para se compreender melhor o efeito desses agrotóxicos sobre o ácaro predador.

Camponeses Brazil's Peasant Movement in Historical Perspective (1946-2004)

Comparison of the histories of three leading peasant organizations in the Pontal do Paranapanema region of Brazil-the Partido Comunista do Brasil (PCB) from 1945 to 1964, the Confederacao Nacional de Trabalhadores na Agricultura (CONTAG) from 1964 to 1984, and the Movimento dos Trabalhadores Rurais Sem-Terra (MST) from 1984 to 2004-suggests that continuity is as important as change in understanding Brazilian peasant movements. The MST has been considered a "new social movement" in that it has eschewed partisan politics, incorporated families as members rather than just male heads of household, had a national scope and a participatory decision-making structure, and been attuned to the international struggle over globalization. Placing it in historical perspective makes it clear, however, that this is not the first time that militants have organized around the concept of peasants as a political identity; that while the representation of peasants in the leadership of contemporary rural labor organizations may be greater than in the past, earlier peasant leaders also struggled on behalf of their class; that earlier peasant organizations had, if not a national presence, a substantial presence in the agricultural states of the time; and that attempts at international organization to unite peasant struggles around the globe are not entirely new. This is not to deny the innovative features of contemporary movements but to suggest that the investigation of past achievements will contribute to a fuller appreciation of these movements' conditions and prospects.

Digital radiography for the inspection of weld seams of pipelines - better sensitivity

Conventional radiography, using industrial radiographic films, has its days numbered. Digital radiography, recently, has taken its place in various segments of products and services, such as medicine, aerospace, security, automotive, etc. As well as the technological trend, the digital technique has brought proven benefits in terms of productivity, sensitivity, the environment, tools for image treatment, cost reductions, etc. If the weld to be inspected is on a serried product, such as, for example, a pipe, the best option for the use of digital radiography is the plane detector, since its use can reduce the length of the inspection cycle due to its high degree of automation. This work tested welded joints produced with the submerged arc process, which were specially prepared in such a way that it shows small artificial cracks, which served as the basis forcomparing the sensitivity levels of the techniques involved. After carrying out the various experiments, the digital meth odshowed the highest sensitivity for the image quality indicator (IQI) of the wire and also in terms of detecting small discontinuities, indicating that the use of digital radiography using the plane detector had advantages over the conventional technique (Moreira et al. Digital radiography, the use of plane detectors for the inspection of welds in oil pipes and gas pipes.9th COTEQ and XXV National Testing Congress for Non Destructive Testing and Inspection; Salvador, Bahia, Brazil and Bavendiek et al. New digital radiography procedure exceeds film sensitivity considerably in aerospace applications. ECNDT; 2006; Berlin). The works were carried out on the basis of the specifications for oil and gas pipelines, API 5L 2004 edition (American Petroleum Institute. API 5L: specification for line pipe. 4th ed. p. 155; 2004) and ISO 3183 2007 edition (International Organization for Standardization, ISO 3183. Petroleum and gas industries - steel pipes for pi pelines transportation systems. p. 143; 2007). © 2010 Taylor & Francis.

Consumo de suplementos esportivos e composição corporal de adolescentes praticantes de exercícios físicos em academias

Pós-graduação em Alimentos e Nutrição - FCFAR

Aspectos da sustentabilidade para a engenharia e integração de empresas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A cunhagem de uma moeda inédita e singular: o processo de criação do Tribunal Penal Internacional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A política externa brasileira e a questão Palestina: análise da imprensa e da diplomacia no período de 1945- 1951

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento das evidências do grupo de odontologia da Colaboração Cochrane pra condutas em saúde

Pós-graduação em Bases Gerais da Cirurgia - FMB

Procedures to Evaluate the Efficiency of Protective Clothing Worn by Operators Applying Pesticide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)