Preparação de substratos de carbeto de silício para fins aeroespaciais

This conclusion thesis has the objective of produce substrates of Silicon Carbide from the powder of SiC for aerospace use. The powder of SiC was pressed in cylindrical form by the process called “wet way”. For the inicial pressing process was used a uniaxial squeezer and after that was used a isostatic squeezer, after that the samples were synthesized. The next step was the machining and polishing to improve the features of the surface of the sample. Then the roughness was measured, as also the Arquimedes method and optical microscopy and scanning eletron microscopy. Some innovations were done, in one of the lots little vacancys were done with organic material or silicon to reduce the weight of the sample; and the other innovation were the use of a slip film of SiC on the surface of the sample, that were after synthesized with LASER to reduce the roughness, in this samples the roughness were reduce in 50 % if compared with the other samples

Abordagem scrum de gerenciamento ágil para desenvolvimento de novos produtos aplicada a área de ensaios de uma fabricante de aeronaves

There are many approaches and techniques about Administration and Management of Projects in order to provide greater agility, efficiency and transparency during the development process of new products. Simultaneously, a pursuit for a management approach more flexible in its planning and strategic changes during the development campaign, such as, comprehend the project's unpredictability level and deal it by monitoring and estimates tools. These features tend to accentuate itself in manufacturers of complex products, as aircraft and other aerospace technologies. By these conditions thus research aims to describe a case when the Agile Management Processing of Project Development Scrum was used in the Test area of an aircraft manufacturer. Focused on the Scrum implementation over the area, its adaptation, evolution and achievements the research proposes to analyze the improvements, indicate the obstacles and discuss solutions, contributing then to the theoretical basis of the considered theme and futures updates applicable to the area. The research is classified as qualitative; furthermore the information and data analyzed were obtained by interviews with professionals and observations of the processes from the major aircraft manufacturer

Desenvolvimento da Tecnologia de Soldagem do Titânio pelo Processo TIG Orbital no Segmento Aeroespacial Brasileiro - Parte 2: Caracterização das Juntas Soldadas

In this work, three welding programs for orbital TIG previously developed were used, using pulsed current and increasing speed (M), constant current (#B) and pulsed current and decreasing current (#C). One of those should be used for the propulsion system of the satellite CBERS (CHINA-BRAZIL EARTH RESOURCES SATELLITE). Welded joints using tubes of commercially pure titanium were obtained with these procedures, which were characterized by means of mechanical and metallographic tests. The obtained results show that the three welding procedures produce welded joints free of defects and with adequate shape. Although small differences on mechanical properties and microstructure have been observed, the three welding programs attained compatible results with international standards used in the aerospace segment. The welding program #B, due the reduced heat input used, was considered to obtain slightly advantage over the others.

Análise crítica do processo de auditoria de sistema de gestão da qualidade no setor aeroespacial

A auditoria de sistema de gestão da qualidade é utilizada pelas organizações para melhorar o seu desempenho por meio de avaliações sistemáticas dos processos. Ao mesmo tempo, a atividade de auditoria vem sendo questionada quanto à sua capacidade de promover essa melhoria. Diante deste cenário, este artigo objetiva analisar fatores que afetam o processo de auditoria de certificação do sistema de gestão da qualidade, de modo a indicar oportunidades de melhoria das auditorias. A pesquisa é delimitada a auditorias no setor aeroespacial, que são orientadas pela NBR 15100. Foi realizada uma survey com auditores experientes nos anos de 2009 e 2010. São identificados fatores como comunicação, seleção da equipe, conhecimento do setor e os resultados mostram a existência de discrepâncias consideráveis entre o nível de importância e de aplicação desses fatores nas organizações auditadas.

La Formación Corumbataí y su importancia en la industria cerámica del estado de São Paulo - Brasil

El desarrollo acelerado del polo cerámico de Santa Gertrudes (provincia de São Paulo) en la década de 90, fue causado principalmente por la localización privilegiada de la materia prima asociada al desarrollo tecnológico, las grandes reservas, el acceso fácil por autopistas que facilitan la distribución de los productos y la proximidad de los grandes centros consumidores. Este desarrollo facilitó que este Polo tuviera un boom en el inicio de 2007 en la fase de madurez con una producción de 367 millones de metros cuadrados, transformándose así en el mayor polo cerámico de las Américas. de acuerdo con los estudios geológicos realizados en este trabajo, las rocas de la Formación Corumbataí, origen de la materia prima usada en el polo cerámico, fueron clasificadas en cinco litofacies: maciza, laminada, intercalada I, intercalada II y alterada. Estas litofacies, por sus características mineralógicas y químicas, fueron consideradas arcillas illíticas con porcentaje medio de fundentes. Tomando como referencia las Normas para baldosas cerámicas, las características cerámicas obtenidas en el laboratorio demostraron que la mayoría de la materia prima es compatible con el grupo BIIb (Absorción de agua entre 6 y 10%).

Analise de uma agroindustria de tomate na Alta Sorocabana: as relacoes industria-produtor.

Looks at the procedures used to organize producers and production in Alta Sorocabana, Brazil. An increasing subordination of the industry is leading to a loss in the competition for expansion. Spatial effects in the region and future trends in tomato cultivation are examined.-J.Robertson

Mineralización de la paja de caña de azúcar en suelo adicionado con viñaza (suproducto de la industria del alcohol de caña de azúcar) y fertilizante nitrogenado

Cellulose is the most abundant vegetable organic compound, being derived mainly from plant residues. The decomposition of sugar-cane (Saccharum officinarum L.) straw was studied in a period up to 90 days, through variables related to the carbon cycle, such as respiratory activity and CM-cellulase (CM, cellulose microcrystalline) and CMC-cellulase (CMC, carboxymethylcellulose) activities. The treatments consisted of 0, 0.5 and 1.0% of straw, in the presence and absence of vinasse (a sugar-cane alcohol industry byproduct) and nitrogen fertilizer. The respiratory and cellulase activities increased up to the 14th day of incubation and later decreased. The respiratory activity was 1.9 and 2.3 fold larger (P < 0.05) in the soil with 0.5 and 1.0% of straw added, respectively, in relation to the control. CM- and CMC- cellulase activities also increased from 1.8 to 2.9 and from 2.3 to 2.7 fold, respectively. The vinasse addition enhanced CO 2 production and CM-cellulase activity, however, no significant effect was observed on CMC-cellulase activity. The addition of N reduced both respiratory and cellulase activities. The decomposition of the sugar-cane straw may enhance soil nutrient cycling increasing agricultural production. © 2006 Instituto de Investigaciones Agropecuarias, INIA.

O financiamento da firma e os arranjos produtivos locais: uma abordagem do APL Aeroespacial de São José dos Campos-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento e caracterização de compósito processados por RTM para aplicação aeroespacial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O capital ganha asas: reestruturação produtiva no setor aeroespacial brasileiro : o caso da EMBRAER

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fatores de risco em cadeia de suprimentos do setor aeroespacial: aspectos qualitativos e quantitativos

The lack of risk management can generate disruption in the supply chain, and there is little literature related to the aerospace industry. This article aims at identifying the risk factors for supply chain of the main Brazilian aircraft manufacturer. Nine risk factors specific to aircraft manufacturers were identified: Environmental, Natural and Political, Supply Chain, Business Strategy, Product Management, Indicators, Organization, Productivity, and Quality and Information System. These factors were quantitatively evaluated with respect to their criticality using the Analytic Hierarchy Process (AHP). The Quality and Productivity factors were considered the most relevant in this study, which can be classified as a single case study. The necessary data were obtained through interviews with professionals from different areas of the studied enterprise.

Estudo do Comportamento da Viscosidade de Sistemas de Carboximetilcelulose de Sódio e Diferentes Componentes nos produtos para industria alimentícia

Currently, the food market is a great competition. It is no longer unanimously in the CMC powder drinks, as in the past, xanthan gum, always seeking to develop more economic alternatives, such as guar gum. It is clear, therefore, it is of vital importance to understand thoroughly the operation of a particular product in different process conditions and with different materials so that we can develop and adapt both new processes and products to new market reality

Avaliação da usinagem do INCONEL 718

The nickel superalloys are known as being a material with poor machinability, they have some properties like high hardness, good resistance at high temperature, tendency to weld with the tool material at high temperature, etc. In the aerospace, biomedical and petrochemical industry, are increasing the need to use materials that resist to aggressive process and environment. In these uses, it has increased the use of nickel-based superalloys like Inconel 718 and consequently the need to research new techniques and tools to improve the machinability of this material. For the superalloys and resistant alloys at high temperatures is considered that the difficulty in the machining regards to the combination of the relatively high cutting forces and high temperatures that grow during the machine process, causing deformation or breakage of the cutting tool. This work purpose is to develop the study of the machining of external cylindrical turning of the nickel based alloy Inconel 718, using ceramic tools, seeking the optimization of machining this alloy, looking to provide real productive increases without the need of investments in new production means. The machining test were accomplished using commercials hard metal tools and the results were compared each other to find the best tool and the best parameter. The conclusion is that the tool TNMG160408-23 -class 1005- was the better one, when used with the parameter 60_15_08

Redução do tempo de setup de máquinas de usinagem em uma industria automobilística

Continuous improvement of industrial processes is one way to become companies more competitive in the market. For this, a fairly widespread use is the methodology of lean production systems, by eliminating waste. One of the tools of these systems is the method of rapid exchange of die or also called SMED, which will be applied in this study. The study aims to develop proposals for reducing the time of set up of two machines in two machining lines, watching also the ergonomics and safety conditions in this operations. The set up time reduction is justified among others, due to increase the machine productivity. In applying the connecting rod machining line, there were two types of exchange. Reductions in time to set up proposals reached values of 47% to one of them, and 55% to the other. It is important to underline that to reach this result, there was no need for large investments. In the application in block machining line, was developed an improvement in the ergonomic area. It was placed a pulley block that came to increase the time of tool change. Aiming to improve the security of the exchange, without productivity loss, the method was applied to reduce this time. It was developed two proposals.: the first would reduce that time by 19%, and does not require many resources of the company. The second involves the parallelization of the exchange, so that the reduction is 48%. However, this proposal requires one more manpower at the time of exchange and it is not always possible

Absentismo laboral por patología odontológica y médica en una industria de gran porte del sector mecánico y mueblero

Introduction: The current Brazilian legislation states that health services must be performed by the Specialized Service of Safety Engineering and Labor Medicine (SESMT). Objective: To analyze the dental and medical reasons for absenteeism, checking the interference of factors such as age, gender and position of the worker, and most of the reasons that led the employee to miss work. Material and methods: The research appears as a descriptive study with a quantitative approach. The dental and medical certificates and statements of attendance were analyzed, duly approved, lodged in a acrylic industry in the city of Araçatuba-SP, from January to July 2011. Results: Of the total number of certificates (n = 1841), only 103 (5.6%) were for dental reasons. Predominance of the age group of 20-29 years, males and with non-administrative function. The reasons most dental and medical certificates stated that led the workers to miss working days were "inclusive and impacted teeth" and "diarrhea and gastroenteritis of presumed infectious origin", respectively. As to factors related to absenteeism, there was a severity index of 2.83, 1.33 frequency and average duration of absences of 2.12. Conclusions: It is concluded that dental reasons had little weight on total absences due to illness that caused the temporary leave of the worker for a shorter period. The age and function variables influence the occurrence of work absenteeism.